Question about Fiat Cars & Trucks

Open Question

Replacing oil pump fiat punto 1.2 - Fiat Cars & Trucks

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
michigan man
  • 3533 Answers

SOURCE: how change gear oil at fiat punto '00

try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Posted on Mar 21, 2009

Ad
ginko
  • 19396 Answers

SOURCE: oil leak on a fiat punto 2001 1.2

Clean the engine block with a compressor and find out where the oil is coming from.
If there is no leak, and motor stays clean, then the oil is being combusted inside the engine, and you should get black smoke from exhaust. In this case it is time to a major repair to the engine.

Posted on May 02, 2009

  • 1986 Answers

SOURCE: fitting a wing mirror on the passenger side of a fiat punto

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

c1apton15
  • 3400 Answers

SOURCE: Fiat punto 02 reg 1.2

I'd start with replacing fuel filter and running a good fuel system cleaner through it with next tankfull

Posted on Mar 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does a steering light on the dashboard of a fiat grande pinto 2007 1.4 means


probably means that the power steering pump needs oil or is not working

Jun 16, 2016 | 2007 Fiat Punto 1.4

1 Answer

FIAT PUNTO 2002 MK2 CVT TRANSMISSION SLEEPING ?


if manual transmission and hydraulic clutch --replace the clutch master cylinder
or cable clutch ---replace the cable
or--- replace the clutch ( 1st two options before the clutch as they are cheaper)
if automatic ---change the oil and have the bands and clutch pack adjusted ( use an accredited auto transmission speciliast shop who has experience on your vehicle)

May 09, 2016 | 2002 Fiat Punto

1 Answer

Torque settings on a fiat uno 1100 engine


Answer barbo(fiat mechanic) Fiat do not issue torque settings for a punto they use angles so that you can snap your stretch bolts! after contacting fiat and haynes neither of them would give proper torque settings, so i delved into my many tech manuals on fiat fire engines which is what is in your punto and i have successfully changed many fiat punto head gaskets using the following torque settings: stage 1 starting from the centre head bolts tighten to 33nm: stage 2:65nm and finally stage 3: 96nm these torque settings work fine and will probably save you buying new head bolts.

Oct 29, 2014 | Cars & Trucks

1 Answer

What is the best way to remove the water pump?


To remove the water pump of Fiat Punto/Stilo:
1 Disconnect the battery negative terminal.
2 Drain the cooling system.
3 Remove the timing belt.
4 Unscrew the retaining nut and the three bolts and withdraw the coolant pump (see illustration). If the pump is stuck, tap it gently? using a soft-faced mallet - do not lever between the pump and cylinder block mating faces of Fiat Punto (Stilo). best-way-remove-water-pump-x4hf4jmz40to2ykgevxwzmql-3-0.jpg

Source: Coolant pump removal inspection and refitting FIAT Punto

Sep 27, 2014 | 2006 Fiat Stilo 1.6

1 Answer

My power steering warning light wont go off in my fiat punto


stop at an auto parts. they will show you where the power steering oil goes.

Jun 30, 2014 | 1998 Fiat Punto

2 Answers

How do you top up auto transmission fluid in dualogic fiat grande punto?


There are no fluids consumed in any motor vehicle

If you need to add to any fluid, you need to make a
repair, for a leak

Sep 17, 2012 | 2007 Fiat Grande Punto

1 Answer

At what mileage do I change the plugs on a 1.2 fiat punto, 56 plate? It is a fiat punto active


the ideal way in changing plugs is to replace it every time you change your engine oil, which is aroung 10,000 kms or 6 months (depending on the oil used). but to save some money, you can always check first the condition of your plugs if it really needs to be changed.

you can check the condition of your plugs by removing it from the cylinder head and checking its contacts:
1. if the contact is brownish in color, then your plug is still perfectly fine.
2. if it is not brown, there is either something wrong in your plug or your engine. so this will be a good time to replace your plugs.

*** tip - when changing your spark plugs, always replace all of them at the same time with the same model and same brand. this technique will ensure that your plugs will be consistent in providing spark always.

Aug 05, 2011 | Fiat Pininfarina Cars & Trucks

1 Answer

HAVE SMALL OIL LEAK FROM TOP OF ENGINE BLOCK DRIPPING DOWN BY SIDE BLACK VERTICAL COVER TO CAM BELT/ALTERNATOR DRIVE BELT. SOMETIMES DROPS ON EXHAUST AND SMELLS. HAD ROCKER COVER GASKET REPLACED 15 MONTHS...


is that a typo
should it be 1996 FIAT PUNTO 55S

degrease the engine with off the shelf products

if leak is confirmed from the top of motor

redo rocker cover seal with silicon
see if that slows the leak
cam seals may not have been replaced when you thought they were

grating noise at belt could be idler bearing

oil leak onto exhaust and smoking
real engine seal . sump


eb4fdf70-44e6-41f2-ace8-30243798de60.jpgeng-cvxygyvu0vydc25j522ljeey-4-2.jpg

Mar 31, 2017 | 2006 Fiat 124

1 Answer

Oil pan replacement on fiat punto


this is not a big job - infact pretty straight forward -word of warning thou do not buy the replacement pan from e-bay - only tip i can give is once removed leave it standing for 24hours so all access oil is drained - makes it easier to fit new one also a cleaner job and less likely to leak - andy

Mar 13, 2009 | 2006 Fiat 124

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...