At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Drop the fuel tank down and drain the fuel out of it. Replace the fuel filter. Put high octane gas back in it with Lucas Fuel System Cleaner and it may take a few ignition cycles to finally get the car to start. Start it and let it run or go drive it down the freeway for 20 miles. Replace the fuel filter again. and run a 2nd tank of gas with 92 octane gas.
you have to take steering column/cover apart to disassemble the unit. once you have the steering cover apart, follow the wires to locate the plug. unplug the old headlight switch and plug in the new one. no need to take steering off, very easy to do.
there is a link on the drivers side behind the engine, you have to use a open ended wrench to get it free, i started by removing that side first, then took off the passenger side, using a open ended wrench as well. good luck! hope this helps
There is a pin that you have to push in on the bottom of the lock cylinder housing.It is recessed in a hole.You have to turn the key to acc or on to get it to push in.Once you push it in you can pull the key and lock cylinder out.
how to remove rear hub on 2013 toyota corola
How much does it cost to replace an ignition switch in a1999 Toyota corrola
how to replace bulb for ignition switch
×