Question about Cars & Trucks
I would strongly suggest you get a diagnostic test carried out to verify this fault, althoug it sounds like a main engine relay or ecu problem.
I am sure there are mobile technicians in your area who can pop round and test this fault for you.
Posted on Apr 24, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem all of these models do, but GM wont recall them. Here is what you do if you have not yet, turn to key to on but don't start the engine all the lights in the dash will go on, when they turn back off see if your security light stays on or blinks. If it does its your Pass Lock security system. You can reprogram it using the key, take the key out then put it back in the ignition move it all the way to ON but don't turn on the engine when the lights in the dash go out turn the key back to the ACC position leave it there for ten minutes the light should turn off after about ten min. then turn the key to the OFF position pull it out about 1/4 of the way then push it in and start it up. If this is the problem you may have to do this any time it does not start up.
Posted on Jun 01, 2009
SOURCE: 97 Avenger will not start!
your coil could have gone out, you could need a new distributor, and your fuel pump could be out. but one thing is the fuses and relays check those as well. there is a relay and fuse for almost anything and that would explain why it all of the sudden happened.
Posted on Jun 09, 2009
The engine and transmission in this cars drivetrain is fully electronically controlled by a computer called the PCM (Powertrain Control Module). Whenever a problem like this occurs the computer stores a record of the problem in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s)
Posted on Jul 03, 2012
Tips for a great answer:
Oct 02, 2015 | 2006 Pontiac Grand Prix
Aug 14, 2012 | 1990 Pontiac Grand Prix
Jun 06, 2012 | 1998 Pontiac Grand Prix
Jul 06, 2011 | 1999 Pontiac Grand Prix
Feb 21, 2010 | 1997 Pontiac Grand Prix
Sep 13, 2009 | 2001 Pontiac Grand Prix
May 05, 2009 | 1997 Pontiac Grand Prix
Mar 16, 2009 | 1997 Pontiac Grand Prix
Sep 15, 2008 | 2004 Pontiac Grand Prix
Sep 21, 2017 | Peugeot Cars & Trucks
31 people viewed this question
Usually answered in minutes!