Question about 1998 Dodge Avenger

Open Question

Input speed sensor 1998 avenger 1999

How many hours labor

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 412 Answers

SOURCE: transmission codes:

I WOULD TRY REPLACING THE INPUT SPEED SENSOR..A DEFECTIVE SPEED SENSOR CAN CAUSE ALL OF THESE FAULTS..IT IS LOCATED IN FRONT OF TRANS ABOVE SOLENOID PACK..IT IS THE ONE CLOSEST TO THE ENGINE..IT SCREWS INTO TO TRANSMISSION..A 1 INCH SOCKET FITS IT..ALSO CHECK WIRING TO BOTH SPEED SENSORS..A SENSOR IS ABOUT 35 BUCKS,AVAILABLE AT YOUR LOCAL DODGE DEALER..GET A NEW ONE AND YOU'LL SEE WHAT IT LOOKS LIKE..FAIRLY COMMON PROBLEM..HAVE REPLACED LOTS OF THEM

Posted on Jul 07, 2009

  • 361 Answers

SOURCE: I need to find out

on the side of tranaxle and inside is one

Posted on Sep 05, 2010

Ironfist109
  • 3018 Answers

SOURCE: Location of the output speed

  • The Output speed sensor is located on the transmission as indicated in the diagram I have put up. They just twist out. Easy fix.

ironfist109_119.jpg

Regards, Tony

Posted on Jun 01, 2011

ZJLimited
  • 17970 Answers

SOURCE: location of 1996 dodge avenger input an output speed sensor

According with repair manual, output speed sensor is located on the Transmission, generally positioned over the park gear and monitors transmission output shaft rotating speed; check some details in the next image...

zjlimited_818.gif


Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Posted on Oct 27, 2011

ZJLimited
  • 17970 Answers

SOURCE: Location Of input an output Speed Sensor on 1996 dodge avenger

According with repair manual, output speed sensor is located on the Transmission, generally positioned over the park gear and monitors transmission output shaft rotating speed; check some details in the next image...

zjlimited_819.gif

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Posted on Oct 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the speed sensor located on a 1997 avenger dodge


I'm not 100% sure if you got the right sensor. What you need is the output speed sensor not the input. if your looking under the hood of your car it will be on the front of the transmission the input is directly above the TCM and the output will be about 6 inches up and to the right of that.

Dec 11, 2014 | 1997 Dodge Avenger

1 Answer

I have a 1999 Jeep grand Cherokee that when it shifts out of overdrive the transmission bangs is that the TCM or I don't think it's a speed sensor or I don't think it is a solenoid can you help me. It...


In a Jeep, OBDII code P0700 indicates that the EATX (Transmission controller) has an active fault and has illuminated the MIL (Malfunction Indicator Lamp aka Check Engine light) via a BUS message. The specific fault must be acquired from the EATX via a DRBIII tool. So until you hook it up to a DRBIII scan tool, you really know what is wrong with your transmission. Input or Output Speed Sensor failures often cause this P0700 code and are a common failure part on Jeep Grand Cherokees. So take it to a dealer you trust or ask around for a transmission shop you could trust - they will have the DRBIII scan tool and you will pay them (in most cases) an hour's labor costs ($60-$100) to tell you what the internal codes are and what it MIGHT take to fix it. Or (this is what I would do), you can try replacing both Input and Output speed sensors yourself and see if that cures it. You will likely spend about $80-$100 on those 2 parts. The dealership will charge you about $180-$250 for those 2 parts plus another hour of labor to put them in. Good luck.

May 02, 2014 | Cars & Trucks

1 Answer

Location Of input an output Speed Sensor on 1996 dodge avenger


According with repair manual, output speed sensor is located on the Transmission, generally positioned over the park gear and monitors transmission output shaft rotating speed; check some details in the next image...

zjlimited_819.gif

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Oct 27, 2011 | 1996 Dodge Avenger

2 Answers

Location of the output speed sensor on a 1999 dodge avenger.


  • The Output speed sensor is located on the transmission as indicated in the diagram I have put up. They just twist out. Easy fix.

ironfist109_119.jpg

Regards, Tony

Jun 01, 2011 | 1999 Dodge Avenger

1 Answer

How expensive are speed sensors for 99 dodge avenger es


Speed sensors are relatively inexpensive, although some are more than others. Here is a good price for comparison shopping.

Oct 14, 2010 | 1999 Dodge Avenger

2 Answers

Transmission codes:


I WOULD TRY REPLACING THE INPUT SPEED SENSOR..A DEFECTIVE SPEED SENSOR CAN CAUSE ALL OF THESE FAULTS..IT IS LOCATED IN FRONT OF TRANS ABOVE SOLENOID PACK..IT IS THE ONE CLOSEST TO THE ENGINE..IT SCREWS INTO TO TRANSMISSION..A 1 INCH SOCKET FITS IT..ALSO CHECK WIRING TO BOTH SPEED SENSORS..A SENSOR IS ABOUT 35 BUCKS,AVAILABLE AT YOUR LOCAL DODGE DEALER..GET A NEW ONE AND YOU'LL SEE WHAT IT LOOKS LIKE..FAIRLY COMMON PROBLEM..HAVE REPLACED LOTS OF THEM

Jul 06, 2009 | 1999 Dodge Avenger

1 Answer

1998 dodge avenger tranmission control solenoid


Below the link for Chrysler/Dodge auto-transmission manual
http://www.scribd.com/doc/7095618/545rfe-Transmission-Manual

Solenoid mounts outside the transmission, so you do not need to remove the transmission to install. It should be located between fuse box and air filter housing on the top of transaxle case and right next to transmission controle module.
I hope his step by step procedure will work for you. It is not hard at all to replace the solenoid. There are three 10mm bolts. You will also need to remove the input speed sensor. One thing to look out for is not bending the gasket when installing the new solenoid:
  1. Disconnect battery negative cable.
  2. Remove air cleaner assembly.
  3. Remove electrical connectors for transmission control module (please refer the manual I send you and autozone.com website).
  4. Remove the Transmission Control Module
  5. Disconnect and remove the input speed sensor
  6. Disconnect the transmission oil cooler lines. Cap off hoses and fittings to prevent foreign matter intrusion.
  7. Disconnect the solenoid/pressure switch assembly connector.
  8. Remove the three solenoid/pressure switch assembly-to-transaxle case bolts
  9. Remove solenoid/pressure switch assembly and gasket

Keep everything clean to prevent foreign materials to go inside
  1. Install solenoid/pressure switch assembly to case using a new gasket
  2. Install bolts and torque to 13 N·m (110 in. lbs.)
  3. Install 8-way connector and torque screw to 4 N·m (35 in. lbs.)
  4. Uncap and install transmission oil cooler lines.
  5. Install input speed sensor and torque to 27 N·m (20 ft. lbs.)
  6. Install Transmission Control Module
  7. Install air cleaner assembly.
  8. Connect battery negative cable.

P.s. 1. You can fine some clips on YouTube.com at least for similar cars
2. Also at Autozone.com you can find the component location for your car and repair guide
3. Also there is a link for Mitchel1 online manual useb by US mechanic 1 week subscribtion is
11.99 , 1 month 16.99
http://www.2carpros.com/kpages/auto_repair_manuals.htm
Let me know if you need more info
Good Luck and happy fixing

Jan 22, 2009 | 1998 Dodge Avenger

Not finding what you are looking for?
1998 Dodge Avenger Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...