Question about Jeep Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The little blade lock will lift up. see image..."http://econtent.autozone.com:24991/znetrgs/repair_guide_content/en_us/images//0900c152/80/0a/9d/4c//medium/0900c152800a9d4c.gif"
Posted on Sep 30, 2008
12 is a battery disconnect within the last 50 start cycles and 55 means the end of the diagnostic cycle. Basically the computer found nothing wrong. The 12 code may seem incorrect if you haven't disconnected the battery recently, but from my experience the 12 code shows up almost all the time regardless.
Posted on Dec 16, 2008
Check the fuses for the overhead console, could be that if not then the console needs to be replaced.....
Posted on Jun 05, 2009
There are two parts to it, a voltage resistor, and the EL panel itself.
You need to remove the console first. There are 2 screws under the front rubber pad, two under the cup holder, two in the bin. Remove those six first, take the storage bin out, then slide the rear cupholder out, remove the two screws under the cup holder, and one in front of it.
There are a total of 6 flat screws, and 3 self tapping screws you have removed.
Put the parking brake on, shift the tranny to N, and the transfer case to the middle position if equipped.
Remove the entire console. Slide the shifter beezel as far up vertically as you can. There are 4 clips you ned to remove to do it.
You will see a blue and black wire running into the back. Follow those wires to the resistor. You will see a transparent EL panel attatched to the resistor by two clips.
Usually, one or both of these clips has come loose, causing the light to work intermittantly. Clip them back on, and turn on the headlights to confirm that the light works correctly now.
Re-install everything in the opposite order.
Posted on Oct 11, 2009
Tips for a great answer:
Jan 25, 2017 | Jeep Grand Cherokee Cars & Trucks
Oct 09, 2016 | 1997 Jeep Grand Cherokee
Mar 11, 2015 | 2015 Jeep Grand Cherokee
Dec 16, 2013 | 2008 Jeep Grand Cherokee
Jun 20, 2012 | 1999 Jeep Grand Cherokee
Nov 25, 2009 | 2004 Jeep Grand Cherokee
Nov 12, 2009 | 1997 Jeep Grand Cherokee
Aug 19, 2009 | 2001 Jeep Grand Cherokee
Oct 20, 2017 | Jeep Cars & Trucks
32 people viewed this question
Usually answered in minutes!