Question about 1987 Dodge Raider
2.6 NEEDS TO BE 6 BOLT 120 TEETH.
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you use an extension on your ratchet that's longer than the starter, and a universal socket, you should be able to get it.
Posted on Jun 17, 2009
I am assuming that it is the 2.6L (G54B) engine. I am not sure if the 6-cylinder was available in 87. If it is the 4-cylinder engine the starter will be on the drivers side down near the side-bottom of the engine. It looks like a silver tube with usually a black center. All you have to do is unplug the electrical from it (i think it is just one connection) and then unbolt it. Getting to the bolts can be a pain so you will just have to find a way that you can get a wrench in to it. Once you take out a couple of bolts (can't remember if it is 2 or 3) you can just pull it out and pop in a new one.
Posted on Oct 20, 2009
The only way is with a scaner. Computer will need to be reset. unhooking the battery will not do it.Computer will have to be reset.
Posted on Jan 04, 2010
if the timing is off you wouldn't have good compression
make sure you have at least 136-170 psi and the different should not be more than 14 psi.
Posted on Mar 08, 2010
Tips for a great answer:
Jan 25, 2014 | Cars & Trucks
May 04, 2011 | 1987 Dodge Raider
Jan 21, 2011 | 1987 Dodge Raider
Aug 17, 2010 | 1987 Dodge Raider
Oct 04, 2009 | 1987 Dodge Raider
Jun 17, 2009 | 1989 Dodge Raider
32 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: