Question about Cars & Trucks

Open Question

Is it safe to use WD 40 on a seat belt buckle

Seatbelt buckle very hard to undo on dodge caravan

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 84 Answers

SOURCE: Seat belt problem

What VW year , model, trim level??

Posted on Oct 31, 2008

  • 124 Answers

SOURCE: seat belt light staying on

There is a small clip with one wire on it at the base of the seat belt where it connects to the floor. It might be broken, or the switch inside the belt clip is faulty. If the wire is fine and connected the belt clip side needs replacing

Posted on Mar 30, 2009

  • 520 Answers

SOURCE: how to replace seat belt buckle on Honda? civic

This rtequires seat removal in order to gain acces to the buck side mounting bolt

Posted on Sep 18, 2009

Testimonial: "Very helpfull"

  • 5 Answers

SOURCE: automatic seatbelts to manual seatbelts

if i were you i would try to make the ones from either the mark 3 supra or try the es250.. im trying to get it to work with the supra but i think your best bet is from the lexus es250. they share the same chassis obviously so most parts are interchangeable.

Posted on Nov 11, 2009

  • 1 Answer

SOURCE: 2005 seat belt reminder keep beeping and the light keeps flashing

take wire harness apart underseat that connects to seatbelt on drivers side. then take a piece of aluminum foil and stuff it into male part so it makes contact with both prongs and plucg connection back together..problem solved!!!!!!

Posted on Feb 03, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I stop the seatbelt noise to stop after buckling up?

If the chime doesn't stop you will have a problem with the floor mounted portion of the seat belt. You can spray some WD 40 in the slot and buckle/unbuckle several times to see if the problem will correct itself. If not the chime module can be removed from under the dash once you follow the noise and locate it

Jul 10, 2015 | Cars & Trucks

1 Answer

How to fix a seatbelt that wont lock

a lot of time when a seat belt buckle will not lock it is because of something down it side of it spray some wd 40 into buckle if this does not work a new buckle is needed. replacement is easy the hardest part is removing seat it get to it which is not that hart also

Mar 06, 2014 | 1992 Ford Explorer

1 Answer

2006 grand cherokee seat belt

Have the same problem in my 98 Toyota Rav4. I squirted the female buckle (bolted to seat, not holding strap harness) with wannabe WD-40 lubricant from the $1 store, and it seem to have solved the problem. I'm guessing the spring mechanism is worn out, which is why the harness buckle won't lock. Another solution is to replace the female lock buckle with an identical part from the used parts junkyard store.

The seatbelt light on the dash stays "on," even when everyone has their belt on, but I don't bother servicing that. If yours have an audible alarm instead of an indicator light on the dash, locate the source of the alarm sound and disconnect the wires to silence the sound.

Nov 29, 2013 | Cars & Trucks

1 Answer

2003 deville seatbelt will not engage

  • Hello again, sometimes them belt buckles get old. You can open that buckle up and sometimes work them little hook's with some WD-40 or and good bolt breaking lubricant. You may be able to save the buckle with just some lubricant. Personally, if giving that much trouble I would replace the buckle itself. Not to hard really.


Oct 08, 2011 | 2003 Cadillac Deville

1 Answer

Even after I buckle my seatbelt the chime still goes off and my car does not recognize it is buckled. Please tell me which fuse I need to take or what to do and dont tell me to check my manual and follow...

Try looking for a wire that connects to the seat belt somewhere under the seat it could have become disconnected or cut. Also try taping the fastener with something like a hammer maybe a bit of WD-40 cause something might be sticking inside the fastener.


Nov 10, 2010 | 2000 Ford Mustang

1 Answer

How do i get my passenger side seatbelt unstuck? it is stuck around the front passenger side seat and i cannot undo it

move the seat back to release tension on the belt buckle and then undo it.
Does that help? If not reply.

Jul 07, 2010 | Cars & Trucks

1 Answer

I have a 200 dodge ram 1500 and the seat belts are stuck any suggestions?

WD 40 is the best first move. Just squirt it right inside the seatbelt latch and work it by pressing the button and putting in and taking back out the other end of the seatbelt. I bet this will do it. The Raz

Apr 15, 2010 | 2000 Dodge Ram 1500 Truck

5 Answers

2005 seat belt reminder keep beeping and the light keeps flashing

take wire harness apart underseat that connects to seatbelt on drivers side. then take a piece of aluminum foil and stuff it into male part so it makes contact with both prongs and plucg connection back together..problem solved!!!!!!

Jun 29, 2009 | 2004 Dodge Ram 1500

1 Answer

2003 Chevy Tahoe seatbelt latch not always locking

spray some white lithium in the belt buckle and put the seat belt latch inside just do that for awhile it should loosen it up/ or wd 40/ Please rate my response thank you very much

Jan 30, 2009 | 2000 Chevrolet Tahoe

1 Answer

1999 pontiac grand prix rear seatbelt won't engage

use wd 40 first try again/ If that does not work get the belt buckles for each on that does not work yes its a saftey issue I believe they maybe like 20.00 each or less/they aare easy to put in you need like a 32torx to remove and install /Please rate my response tahnk you very much

I fyou decide to take them out before you take them out disconnect the battery

Jan 30, 2009 | 1999 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides