Question about 2004 Ford Freestar

Open Question

2004 freestar Windshield Wiper Motor replacement

Whats all involved in changing this motor

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Windshield wiper arm on passenger side won't move.

tighten the nut under the cap, of the wiper

Posted on Dec 09, 2008

Ad
  • 4369 Answers

SOURCE: Front Windsheild Wipers

I have 2007 only. please rate as solved if this is what you needed. good luck.

SECTION 501-16: Wipers and Washers 2007 Freestar/Monterey Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 04/27/2006
Wiper Motor — Windshield s7w~us~en~file=adobe.gif~gen~ref.gif Printable View (104 KB) Removal

  1. Remove the windshield wiper arms.
  1. NOTE: Disconnect the washer hose before removing the cowl panel grille.
    Remove the pushpin-type retainers and the cowl panel grille.
  1. Remove the washer hose grommet from the cowl panel and position aside the washer hose.
  1. If equipped, remove the A/C air inlet filter.
  1. Remove the 9 cowl panel bolts and position aside the cowl panel.
  1. Disconnect the windshield wiper motor electrical connector.
  1. Remove the cowl panel from the vehicle.
  1. Remove the 4 bolts and the windshield wiper motor.
    s7w~us~en~file=n0001518.gif~gen~ref.gif
Installation
  1. Position the wiper pivot arms on the windshield wiper motor and install the bolt.
    • Tighten to 15 Nm (11 lb-ft).
  1. Install the 3 windshield wiper-to-cowl panel bolts.
    • Tighten to 15 Nm (11 lb-ft).
  1. Position the cowl panel in the vehicle and connect the windshield wiper motor electrical connector.
  1. Install the washer hose and grommet in the cowl panel.
  1. Install the 9 cowl panel bolts.
    • Tighten to 6 Nm (53 lb-in).
  1. If equipped, install the A/C air inlet filter.
  1. Position the cowl panel grille in the vehicle and connect the washer hose.
  1. Install the pushpins.
  1. Install the windshield arms and nuts.
    • Tighten to 27 Nm (20 lb-ft).
  1. Cycle and park the windshield wipers to check for correct alignment.
3c6f4d5.gif
b8a2ebf.gif

Posted on Apr 10, 2009

c17hydro
  • 2984 Answers

SOURCE: Ford Taurus 1999SE-Windshield wiper motor just hums.How to fix ?

Removal & Installation To Remove:

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Disconnect the battery ground cable.
  3. Remove the wiper arms.
  4. Remove the 8 plastic retainers and the 6 clips holding the cowl vent screens to the inner panels. Turn the retainers 1⁄4 turn counterclockwise to remove.
  5. Remove the cowl vent screens.
  6. Disconnect the electrical connector from the wiper motor and remove the 4 bolts that mount the module assembly to the cowl.
  7. Remove the windshield wiper module from the vehicle.
  8. Rotate the wiper operating arm in a clockwise direction to gain access to the bolt retaining the arm to the motor. WARNING
    Always rotate the wiper operating arm in a clockwise motion or damage to the motor could occur.
  9. Remove the nut retaining the wiper operating arm to the wiper motor.
  10. Remove the three wiper motor-to-wiper module assembly retaining bolts and remove the motor from the vehicle.
To Install:
  1. Position the wiper motor on to the module assembly. Install the three wiper motor-to-wiper module assembly retaining bolts. Tighten the bolts to 115-151 in lbs (13-17 Nm).
  2. Position the wiper operating arm on the wiper motor output shaft. Install the mounting nut and tighten to 22-29 ft-lbs (30-40 Nm).
  3. Position the windshield wiper module onto the cowl. Install the mounting bolts and tighten to 106 in-lbs (12 Nm).
  4. Connect the wiper motor electrical connector.
  5. Position the cowl vent screens onto the inner panels. Install the 8 plastic retainers and the 6 clips holding the cowl vent screens to the inner panels. Turn the retainers 1⁄4 turn counterclockwise to install.
  6. Install the wiper arms.
  7. Connect the battery ground cable.
  8. Adjust wiper arms if necessary.

Here is the picture of the motor....it is the round object in the middle of the picture that looks like a can and has a square block on the end of it.

You have to remove the cowl vent panel....just under the windshield. $64.00 for a new motor.

Posted on Oct 01, 2009

Testimonial: "Fast and accurate response."

  • 108 Answers

SOURCE: I need to replace a windshield wiper motor on a

remove the wiper arm L&R using the corresponding spanner.open the cowl plastic cover by removing the screws along the sides.upon removing the cover you can access the wiper motor and linkages.disconnect the connector and bolts and take it out in one piece more easier to replace

Posted on Jan 15, 2010

  • 246 Answers

SOURCE: ford f150 windshield wiper bushing diagram

sounds like a loose nut. there are nuts that hold the wiper arms on, they may be under a cover but theyre at the base of the wiper arm. also there's a nut that holds the wiper linkage onto the wiper motor. if you can move the wipers independently, it's the nuts connecting the wiper arms.if you move one arm and the other moves with it, it's the nut holding the linkage to the motor.

Posted on Feb 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I turn the switch to my 2006 Cadillac DeVille CTS windshield wiper it does nothing no sound no movement what is wrong


Hard to say what's wrong without testing thing's . Is there B+ voltage to the wiper switch ? B + voltage to the wiper motor ? Do you know how to use a voltmeter ? How to test electrical circuits ?
Here is a factory service manual list of componets involved .
Wiper/Washer System Components
The Wiper/Washer System consists of the following electrical components:
• Accessory relay
• Heated washer nozzles w/XA7
• WASH NOZ 10A fuse
• Windshield washer fluid level switch
• Windshield washer pump motor
• Windshield wiper motor
• Windshield wiper motor module
• Windshield wiper/washer switch
• Wiper/washer switch 10A fuse
• Wiper motor 30A fuse

Do you know how the wipers work ?
Windshield Wiper Motor Wiring Tutorial
Wipers Inoperative - All Modes ?????
Wiper Motor Switch Troubleshooting

Sep 05, 2017 | Cadillac Cars & Trucks

1 Answer

Location of wiper motor on 2006 freestar sel


Do you see the wiper arms and blades ? The motor is under the plactic cowl below the wiper arms . may be a video on youtube showing how to get to it. How To Install Replace Windshield Wiper Motor 2002 09 Ford Focus

This isn't the same vehicle , mite be close ! It will give you a look at what has to done to get at the motor

Dec 25, 2016 | Cars & Trucks

2 Answers

How to replace windshield wiper motor on 2004 chevy cavalier


greetings!

here is a bing related search with MULTIPLE walk through videos on how to replace / exchange windshield wiper motors.

be sure to refine your search by navigating for your specific brand vehicle . for you it would be Chevrolet.

and if it is not the same year do not be alarmed. still continue to watch the video. sometimes just because it is a different doesn't always mean it could look exactly the same!

the other link is a bing search for the windshield wiper motor for your vehicle.



http://www.bing.com/videos/search?q=How+to+replace+windshield+wiper+motor+on+2004+chevy+cavalier&FORM=HDRSC3 http://www.bing.com/search?q=windshield+wiper+motor+on+2004+chevy+cavalier&form=U280DF&pc=U280

Dec 29, 2015 | Cars & Trucks

1 Answer

2004 olds alero clog sprayer heads how to get them off


2004 Oldsmobile Alero Replace windshield wiper motor ...

www.fixya.com > ... > Oldsmobile > Alero > 2004 Oldsmobile Alero
Get solutions for 2004 Oldsmobile Alero replace windshield wiper motor ... The problem is often just a clog in the sprayer heads. ... ...windshield wiper fluid, I hear the pump's motor running but no fluid is ejected. remove the hose from the wiper .

Oct 16, 2015 | 2004 Oldsmobile Alero

1 Answer

Service brake master cylinder on 2004 Ford Freestar SE.I am replacing the rear brakes and will need to bleed them But I am unable to locate/get to the master cylinder..Help


The master cylinder is on the drivers side, under the windshield wiper cowling. I remove the cowling. Remove the wiper arms, Remove the six screws in the cowling, pull it off. Remove the ten MM nuts by the windshield, remove the 13 MM bolts on the fire wall. Unplug the wiper motor. Pull out and up at the same time. This would be a good time to replace the valve cover gaskets also. They always leak on the back side, because of the heat.

Nov 15, 2014 | 2004 Ford Freestar

1 Answer

Where is the cowl on a 2004 ford freestar


its the black cover that covers wiper motor and half the engine in front of your windshield need to take that off to get to back side of engine also to get to your computer

Feb 27, 2013 | 2004 Ford Freestar

1 Answer

How to change the coil in a 2004 ford freestar 3.9L


The ignition coil on a 2004 Ford Freestar is a bit of work to replace. Here are some steps:
1. Disconnect the negative battery cable;

2. Remove windshield wiper arms (you might need a cheap puller to get the arms off the spindles), marking the windshield with tape to help you reposition the wiper arms;
3. Remove the trim screws from the upper cowling and remove the cowling;
4. Remove a bunch of screws from the lower cowling, taking care not to remove the screws holding the wiper motor onto the lower cowling;
5. Remove the lower cowling with the wiper motor attached;
6. There is a large black piece on the passenger side of the car that covers up a big part of the engine. There are three screws that if you loosen you'll be able to remove this part;
7. Now you can get to the ignition coil, which is on the back of the engine; remove the wires (marking where the go);
8. There are only three screws that hold the coil on. Two on your right and one on the left (as you look into the engine compartment). Remove the three screws and the coil comes right out.
Good luck!

Sep 10, 2011 | 2004 Ford Freestar

2 Answers

How do i get to the rear spark plugs & coil pack on my 2005 Freestar


the coil pack is in the front, but the back plugs can be done (not easily) by removing the 'shelf' over the top of the rear cowl and removing the wiper motor assembly. I hope this helps - rate my answer to let me know and to help others with the same problem

Feb 05, 2011 | 2004 Ford Freestar

1 Answer

Am looking to replace my windshield wiper motor,


It is located under the hood just in front of the windshield on the firewall. You need to remove the plastic grill that covers the wiper assembly & remove the appropriate hardware holding the wiper motor in place. Good luck!

Apr 01, 2010 | 2004 Pontiac Grand Prix

2 Answers

Front Windsheild Wipers


I have 2007 only. please rate as solved if this is what you needed. good luck.

SECTION 501-16: Wipers and Washers 2007 Freestar/Monterey Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 04/27/2006
Wiper Motor — Windshield s7w~us~en~file=adobe.gif~gen~ref.gif Printable View (104 KB) Removal
  1. Remove the windshield wiper arms.
  1. NOTE: Disconnect the washer hose before removing the cowl panel grille.
    Remove the pushpin-type retainers and the cowl panel grille.
  1. Remove the washer hose grommet from the cowl panel and position aside the washer hose.
  1. If equipped, remove the A/C air inlet filter.
  1. Remove the 9 cowl panel bolts and position aside the cowl panel.
  1. Disconnect the windshield wiper motor electrical connector.
  1. Remove the cowl panel from the vehicle.
  1. Remove the 4 bolts and the windshield wiper motor.
    s7w~us~en~file=n0001518.gif~gen~ref.gif
Installation
  1. Position the wiper pivot arms on the windshield wiper motor and install the bolt.
    • Tighten to 15 Nm (11 lb-ft).
  1. Install the 3 windshield wiper-to-cowl panel bolts.
    • Tighten to 15 Nm (11 lb-ft).
  1. Position the cowl panel in the vehicle and connect the windshield wiper motor electrical connector.
  1. Install the washer hose and grommet in the cowl panel.
  1. Install the 9 cowl panel bolts.
    • Tighten to 6 Nm (53 lb-in).
  1. If equipped, install the A/C air inlet filter.
  1. Position the cowl panel grille in the vehicle and connect the washer hose.
  1. Install the pushpins.
  1. Install the windshield arms and nuts.
    • Tighten to 27 Nm (20 lb-ft).
  1. Cycle and park the windshield wipers to check for correct alignment.
3c6f4d5.gif
b8a2ebf.gif

Apr 09, 2009 | 2006 Ford Freestar

Not finding what you are looking for?
2004 Ford Freestar Logo

Related Topics:

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...