Question about 2001 Chevrolet Impala

Open Question

P0713 tft location

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5470 Answers

SOURCE: code p0713

The fluid temperature signal is high in the transmission. Check you fluid levels or you may be okay and the sensor is bad or the wiring is at fault.

There may be some Ohm tests you can give the sensor but you would need to research the proper readings. This part may not be very expensive and replacing it with a new one may be easier than looking everything up.

If you Web browse the topic "2003 Blazer Transmission temperature sensor" you may get diagrams and photos. If the sensor is mounted low in the casing, be prepared for a flood of trans fluid when you remove this sensor.

Posted on Nov 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does 2005 equinox check engine codes p0700 and p0713 mean?


P0700 Transmission Control System Malfunction P0713 Transmission Fluid Temperature Sensor Circuit High Input Full list of the OBD2 DTC from P0700 to P0999

Jun 27, 2014 | Chevrolet Equinox Cars & Trucks

1 Answer

I have a 1998 jeep grand cherokee larado 4.0 with auto trans. I code a p0711 and a p0713. It goes in and out of overdrive after an hour or so of driving. Some days it doesn't do it at all. I had senso


codes po711 andp0713 refer to transmission fluid temperature (TFT) sensor ---range /performance problem and high input===causes --wiring--TFT sensor ---ECM/TCM and wiring short to positive --TFT sensor ECM/TCM

Replace the TFT and have a check done on the TCM as it is what decides the OD selection process. Check the condition of the oil and oil level and change if not bright cherry red

Mar 29, 2014 | Jeep Cars & Trucks

2 Answers

2010 Hyundai Santa Fe trouble codes P0711, P0713


code p0711 refers to transmission fluid temperature (TFT) sensor--range/performance problem===causes--wiring TFT sensor
code p0713 refers to TFT sensor --high input--===causes --wiring short to positive--TFT sensor---ECM/TCM. If you can get to the TFT sensor, Then you can do it your self

Dec 20, 2013 | 2002 Hyundai Santa Fe

2 Answers

Got a code P0713 along with the check transmission light. Check transmission light will go on while I'm driving, and go away when I come to a stop. Also went away for a whole day, then came back today. The...


TFT is Transmission Fluid Temperature. Check your ATF level. Check the wiring harness that goes i to the transmission for proper connection. If your transmission has not had a service since 2011 THEN DO IT. CHANGE FILTER FLUID AND MAKE SURE THE COOLER GETS FLUSHED.

Apr 01, 2017 | Lincoln Aviator Cars & Trucks

1 Answer

P0713


I found that my gas cap wasn't sealing when I tighten it so I put WD-40 on and light stayed off so I oil it down every now and then

Mar 19, 2013 | 2001 Hyundai Accent

1 Answer

Code p0713


The fluid temperature signal is high in the transmission. Check you fluid levels or you may be okay and the sensor is bad or the wiring is at fault.

There may be some Ohm tests you can give the sensor but you would need to research the proper readings. This part may not be very expensive and replacing it with a new one may be easier than looking everything up.

If you Web browse the topic "2003 Blazer Transmission temperature sensor" you may get diagrams and photos. If the sensor is mounted low in the casing, be prepared for a flood of trans fluid when you remove this sensor.

Nov 03, 2012 | 2003 Chevrolet Blazer

2 Answers

I have three codes p1624 p0763 p0713


hi, dear friend, this is an obd2 trouble code tabkle, it can help you understand the meaning of code.
and this is tool can help you clear it.

Jun 20, 2011 | 2000 Kia Sephia

1 Answer

The code p0713 and p0731 come up i dont know what to do


you will need to have your transmission looked at. P0713 is a transmission fluid temp circuit high input, which means the fluid in the transmision was hot beyond limits and the other code P0731 was the first gear ratio incorrect. This could be as simple as a fluid and filter change or could be the indicator of more issues. Good luck and let me know if you need anything else.

Jan 27, 2011 | 2000 Jeep Cherokee

Not finding what you are looking for?
2001 Chevrolet Impala Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...