Question about 2007 Nissan Sentra 2.0 SL Sedan

Open Question

Valve adjustments - 2007 Nissan Sentra 2.0 SL Sedan

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 77544 Answers

SOURCE: Valve adjustment titan

the valves are hydraulic, this means they are zero lash, no adjustment required.

Posted on Dec 27, 2008

Ad
  • 106 Answers

SOURCE: 87 pulsar loss of power and making alot of noise

adjust timing at the distributer . turn one way or the other tillit quits clattering. dont moveit far though.a

Posted on Feb 12, 2010

  • 9 Answers

SOURCE: what is the valve adjustment specs for a 1986

.012

Posted on Sep 24, 2010

  • 104 Answers

SOURCE: How mush will A valve adjustment coast me?

roughly it would be be 2-6 hrs at 85-125$ hr depending on what kind of vehicle

Posted on May 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Valve clearance


Valve clearance Google search your year make and model valve clearance. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Checking and adjusting valves
Engine Valve Adjustment Procedure The Right Way
Valve Clearance Adjustment
Valve clearance Google Search

Aug 10, 2016 | Cars & Trucks

1 Answer

How to adjust valves on Toyota 1991 23re engine


Very carefully my friend. Kidding. Ok, remove the valve cover and anything in your way of removing it. By hand, with a socket and ratchet, on the crankshaft bolt head, turn the engine over to get #1 piston to top dead center on compression stroke. You'll need to find out what the valve lash should be in order to adjust properly, I run the 22R engines and only have specs for that, and have a feeler gage to place between the valve head and rocker arm. Check the gap on the intake valve for it is in position to adjust now because the cam lobe is at the farthest away from the valve. If it needs adjusted closer, turn the nut loose and screw the center in to tighten and out to give more gap, then tighten the jam nut after adjusted. Now turn the crank to bring #3 to top dead center and adjust that intake. Once done go back to #1 exhaust and adjust it. You'll know when the #3 is TDC when the rocker is loose on intake valve along with #1 exhaust. Now bring #4 piston up to TDC and adjust intake valve. Like I said, you'll know when it's @TDC when that rocker is loose, but with the spark plugs out you can stick a screwdriver in the plug hole to be sure it's up. Firing order on 4 cylinders is 1-3-4-2 so do your adjustment in that order for each intake valve and go back to the last one adjusted and do the exhaust valve.

Dec 01, 2014 | Toyota Cars & Trucks

1 Answer

What is the valve adjustments and method for 4runner v6?


The valve clearance is 0.009"-0.12" for intake valves
0.11"-0.15" for the exhaust valves
The adjustments are made using different thickness shims below each cam lobe, special tools are needed.
The ticking noise can also be caused by a broken valve spring. These engines usually have oil pressure of about 10-20 psi at idle.

Jan 25, 2018 | 1995 Toyota 4Runner

1 Answer

I need the required valve & inyector clearance on a M11 engine


Cummins M11

Intake valve clearance 0.010 inch
Exhaust valve clearance 0.024 inch

The firing order is 1-5-3-6-2-4 and that is the order the valves should be adjusted started with first timing mark on main pulley adjust cylinder number 1 The valves and injector should be adjusted at the same time The crankshaft is then rotated 120 degrees to next timing mark and cylinder 5 is adjusted, the crank is rotated again 120 degrees to next timing mark and cylinder 3 is adjusted.then back to the first timing mark, cylinder 6 is adjusted, etc/

Adjusting nut on plunger should be adjusted to the point where you feel the plunger just reaches the bottom.of travel/bottoms out.

Feb 15, 2012 | Cars & Trucks

2 Answers

Overhead valves making noise like they need ajusting


Valve Lash ADJUSTMENT 1.6L Engines NOTE: Measure valve clearance with the engine cold.
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove the valve cover.
  3. Set the engine to Top Dead Center (TDC) of the compression stroke for the cylinder to be adjusted.
  4. Check the valve clearance. The valve clearance specifications are as follows:
    • Intake valves: 0.005-0.007 inches (0.13-0.17mm)
    • Exhaust valves: 0.005-0.007 inches (0.13-0.17mm)
  5. After adjustment, tighten the locknuts to 11-14 ft. lbs. (15-19 Nm).
  6. Repeat for each valve to be adjusted.
1.8L, 2.0L and 2.5L Engines The 1.8L, 2.0L and 2.5L engines utilize automatic hydraulic lash adjusters to maintain proper valve lash at all times. Periodic valve lash inspection and adjustment is not necessary or possible. prev.gif next.gif

Sep 14, 2010 | 2000 Chevrolet Tracker

1 Answer

I need the engine valve spec for a 1984 chevy 6.2 diesel. We are adjusting the valves.


VALVE ADJUSTMENTS All gasoline and diesel engines in this guide use hydraulic valve lifters, which require no periodic maintenance or adjustment. However, in the event of cylinder head removal or any operation that requires disturbing or removing the rocker arms, the rocker arms must be adjusted in order to position the pushrods to allow the hydraulic lifters to maintain zero lash. Refer to the valve lash adjustment procedure under Rocker Arms, earlier in this Section.

Aug 21, 2010 | 1984 Chevrolet K1500

1 Answer

Want to know what the valve clearances are for my 1999 hyndai excel


Adjust the jet valve clearance before the adjustment of the
intake valve clearance.
Jet valve clearance (hot engine)
[Standard value]. . . . . . . . . . . . . . . . . . . 0.25 mm (0.010 in.)

now adjust valve clearance
Valve clearance (hot engine) [Standard value]
Intake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.15 mm (0.006 in.)
Exhaust. . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 mm (0.010 in.)

Jul 30, 2009 | 1990 Hyundai Excel

1 Answer

How to adjust the valve adjustments


you need to remove the valve cover and if they are even adjustable there will be locknuts on a stud on one side you need feeler gauges and adjust by loosenin the nut with cylinder in compression sequence tightrn stud with screw driver or allen wrench whichever applies put feeler guage probably.018 between rocker and vale tightrn untilfeeler gauges move with some resistance lock nut tight but be sure you can still move feeler gauge get all cylnders then reinstall valve cover

Jul 21, 2009 | 1992 Daihatsu Rocky

1 Answer

Valve adjustment


tiburon uses hydrolic lash adjusters there are no valve lash adjusting If you hearing a pecking sound on the top of the mtr try some oil additive or replace the hydrolic lash adjusters

Jun 15, 2009 | 2001 Mitsubishi Eclipse

Not finding what you are looking for?
2007 Nissan Sentra 2.0 SL Sedan Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

77544 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...