Question about Cars & Trucks
System too lean left and right bank
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: check engine light on
Generally when these codes appear it is due to insufficient fuel pressure. Test your fuel pump to ensure it is within specs. Have you changed your fuel filter?
Posted on Jan 15, 2009
SOURCE: vehicle failed emissions testing
You need to replace the intake upper plenum gaskets. There is two pieces, a top cover with one big silicone o-ring gasket and a lower half with six smaller silicone o-rings for the individual intake ports. You can buy these as a set, just for this job. Start this job by removing the wiper blades, then release all the screws, (including the ones that support the wiper motor), that hold that big black plastic valence at the back of the engine compartment. Pull that out of the way, you will have to pull the windshield washer hose through it, just disconnect it on the engine side, now you have access to the plenum. It's a pretty easy job now to remove and replace both halves, just a bunch of 8mm screws hold it all together. Take notes or digital pics along the way so you can pop it all back together. My only caution would be; when you have it apart, do not drop anything in the intake port! I always stuff kleenex in these while I'm working in case something slips out of my hands. Also, don't over tighten, it's all plastic. If you don't want to do it yourself, a shop should charge about an hour and a half, plus the codes must be reset and the van driven until all the monitors are ready.
Posted on Mar 26, 2009
SOURCE: diagnostic code #'s p0174,p0171
oxygen sensors are telling you that the mixture is too poor on ur sistem need to check its behaviour and see whats causing that lean mixture
hoope this helps
Posted on Nov 10, 2009
Tips for a great answer:
Mar 06, 2017 | Cars & Trucks
Jan 19, 2017 | Holden Cars & Trucks
Nov 03, 2016 | Cars & Trucks
Dec 29, 2015 | Cars & Trucks
Oct 20, 2014 | Cars & Trucks
Dec 13, 2013 | Cars & Trucks
Nov 03, 2012 | 2000 Dodge Durango
Jul 16, 2009 | 1996 Ford F150 Regular Cab
53 people viewed this question
Usually answered in minutes!