Question about 2002 Hyundai Accent
I have an automatic Hyundai accent. I am having weird problems... It will get stuck in 2nd or 3rd gear and stay stuck it sounds like its crying for help! My mechanic said it's the electrical harness and some sensor and it would cost me $931.00 to fix it!! I just had my tranny rebuilt 3 years ago... This morning it was put in reverse and it shook really bad and the check engine light started blinking
When the check engine light flashes it means DONT RUN IT or you will damage the engine. There are codes that your mechanic pulled from the computer, WHAT ARE THOSE CODES?
Posted on Apr 29, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: hyundai santa fe 2001
p0715 > A/T input speed sensor circuit 1. Many malfunctions in the electrical system are caused by poor harness and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage. 2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. P1729>This DTC code is related to the EMC and is set If EMS harness has an open battery source 1. Ignition OFF 2. M54 Electric Magnet Valve Clutch connector : Disconnect. 3. Measure resistance between 1 & 2. A. Specification : Approx. 1.8 ~ 2.2 Ω The above value is only for reference. The data from vehicle may differ from it according as various vehicle condition. This inspection is for checking open or short of EMC coil.
Posted on Jun 16, 2008
SOURCE: hyundai santa fe 2001
FC P1529 means "Check TCM"
Posted on Jul 08, 2008
You need to check the transmission fluid level, if it is low the tranny will not shift. If, however, the fluid is to the proper level then you will need a new transmission.
Try putting new fluid in and look for a leak in the pan gasket, then all you may need is a transmission service. When the service is done the mechanic will look for pieces of metal in the old fluid, if found this is very bad and you will need a new tranny.
You might consider a new or used car, you can definately find a good deal out there!
Posted on Nov 16, 2008
It sounds like you have either a lean or rich condition ocurring,could be exuast leak,vac leak,leaking fuel preasure regulator,cat convertor.At this point would go to dealer for diagnosis.
Posted on Jun 17, 2009
P0734 - 4th gear incorrect ratio. P1529 Malfunction Indicator Lamp Request. Problem is in the transmission.
Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.
Posted on Oct 03, 2009
Tips for a great answer:
Jun 15, 2013 | Hyundai Cars & Trucks
Jun 17, 2017 | 2002 Hyundai Accent
Feb 05, 2011 | 2002 Hyundai Accent
Jul 04, 2010 | 2008 Hyundai Accent
Apr 25, 2010 | 2002 Hyundai Accent
Mar 11, 2010 | 2008 Hyundai Accent
Oct 01, 2009 | 2002 Hyundai Accent
Jun 18, 2009 | 1997 Hyundai Accent
284 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: