Question about Cars & Trucks

Open Question

Hi David just read your reply to p1647 and p1111p regarding 02sensor .I have same two codes just come up on my s type 2003 jag v6 3 ltr engine is it possible that one sensor as brought both codes on ? If yes which one would you change first ? The car runs perfect but engine management light on . Kind regards Alan

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 86 Answers

SOURCE: what are sensor codes P1647 & P1111

p1647 is linear o2 sensor control chip bank 2 p1111 is intake air temp sensor

Posted on Nov 10, 2009

Testimonial: "thank you for an incredibly quick response that I can understand.Superb."

Ad
Mr BrokRench
  • 1623 Answers

SOURCE: X TYPE 3.0 JAG. I HAVE A FAULT CODE P1647 AND

That P1647 fault code is for the upstream oxygen sensor on bank 2. This is the top sensor on the front exhaust cat converter. The usual failure is the sensor itself but you should inspect the harness that runs under and clipped to the battery tray. It is the sensor with the gray connector
Driveability will not be effected at the present, but it should be corrected in a timely manner to prevent damge to other componets, such as the catalytic converter.

Good luck, i hope this helps & thanks for using FixYa!

Posted on Jun 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P1111 p1647


i had my check engine light come on with the code p1111 it was a vacuum line.take the plastic engine cover off. it should be right on top where it says jaguar follow the a after the u to a hose somewhere in that hose either is split or has some kind of defect in it.either put some electrical tape around the hole or split.i just went out and put a new hose with hose clamps on it to fix that problem.check engine light went out after 2 days.i hope this is your problem.i don't know what code p1647 is yet.please post if this is the problem.

Sep 05, 2013 | 2003 Jaguar X-Type

1 Answer

Fault code P1647, wiring ECM


There are many places that Oil can come from.

Most common is the Valve Cover but you need to spray the engine down and then look very closely to find some of them... Oil Pressure Sending Units, Intake, Water Jackets, The list goes on and on.

Apr 08, 2013 | 2003 Jaguar X-Type

1 Answer

X TYPE 3.0 JAG. I HAVE A FAULT CODE P1647 AND ENGINE LIGHT ON DASH BOARD IS ON. WHAT WOULD HAPPEN IF I TAKE NO NOTICE OF THIS AS THE CAR IS FINE ?


That P1647 fault code is for the upstream oxygen sensor on bank 2. This is the top sensor on the front exhaust cat converter. The usual failure is the sensor itself but you should inspect the harness that runs under and clipped to the battery tray. It is the sensor with the gray connector
Driveability will not be effected at the present, but it should be corrected in a timely manner to prevent damge to other componets, such as the catalytic converter.

Good luck, i hope this helps & thanks for using FixYa!

Jun 28, 2011 | 2003 Jaguar X-Type

1 Answer

My jag is giving out a manufacyrer specific code P1647 can you tell me what it is please


I believe it is a lean condition on bank 2 of engine. Causes are usually bad Oxygen sensor,or dirty connector or possible vacuum leak. Have mechanic test upstream oxygen sensor on bank#2.

Nov 17, 2009 | 2002 Jaguar X-Type

2 Answers

Trouble code p1647


hi, i work as a mechanic and have just had this code (p1647)on an 02 2.5 ltr x type. got the definition for 02 banks as well. as there are 2 sensors on each bank i took a look at the live data and it showed a slugish response on sensor two(after the cat). unplugging the sensor in the front cat brought up another code for bank two sensor two so this is obviously the right sensor. changed sensor and sent the car out, hope this helps, jon.

Dec 12, 2008 | 2002 Jaguar X-Type

1 Answer

Po1647 engine code


Hi,

P1647 Linear O2 Sensor Control Chip (Bank 2)
Hope this helps...

Jun 04, 2008 | 2003 Jaguar S-Type

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14398 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...