-
Master
1,596 Answers
- Posted on Mar 14, 2009
Re: Scanner reads code (060)
Location of "ECM" is Under the Air Filter Box
- Disconnect the negative battery cable.
- Remove the air cleaner box, refer to the air cleaner box.
- Remove the gray and black connector from the PCM.
- Remove the harness clip bracket from PCM bracket.
- Remove the nut from the upper bracket mount.
- Raise vehicle and support on hoist.
- Remove 2 lower bracket bolts.
- Remove 4 screws from bracket and remove bracket from PCM.
INSTALLATION
- Install bracket to PCM and tighten screws.
- Install PCM and bracket to body and tighten the 2 lower bolts.
- Lower vehicle.
- Install upper bracket nut and tighten.
- Clip in wiring harness bracket.
- Install gray and black connectors to the PCM.
- Install the air cleaner box, refer to the air cleaner box.
- Connect the negative battery cable.
060 is not a code, I would like to see the code before u spend hundreds on a PCM or ECM
×