Question about Chevrolet 1500

Open Question

I want to bypass the clutch pedal neutral safety switch because my truck won't start with! it

Begining, I just put a new clutch and pressure plate in my truck. NOTE: I have a NV3500 GM 5 speed transmission.. The thing is my truck would not start after putting everything back.. I went and bought a new Nutral Safety switch. Snapped it to my clutch pedal rod up by the firewall. Still my truck would not start:(? So I by-passed the switch wireing by connecting 2 wires from a horn switch that I purchased and pluged 1-wire into the purple lead of the switches wire assembly & the other wire into the brown wire.. My truck starts and a saftey light comes on in the dash.. I tried adjusting the Neutral Safety switch by sliding it back and fourth and using the ignition at the same time.. My engine turn's but will not start up.. Anyone KNOW how to fool the computer in my truck and to by pass this "pain in the neck" Neutral safety switch to start my truck & just go?? Theres got to be a good wrench out there that knows how to do this bypass??? I've heard (For every problem there's a solution, but I have not found the solution to this one yet? Starting

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7353 Answers

SOURCE: Truck randomly won't start. No clicking, no

when it wont start, turn your headlights on, see if they work if they dont, find out why. When it wont start, take a wire from the positive battery terminal and touch it to the small post on the starter solenoid, it should crank. If it now cranks, theres a problem between the ign switch and the starter solenoid.

Posted on Jun 11, 2010

  • 474 Answers

SOURCE: 1997 vw golf 2.0 5speed start

Check body to motor ground wire and battery to motor and body ground.

Posted on Jul 23, 2010

edwardjwoods
  • 372 Answers

SOURCE: trying to replace a clutch

do not bypass it. the only wires on it that are of concern are the 2 purple wires. If you wire them together it will start without the clutch pedal depressed but that can be very dangerous.

Posted on Dec 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to bypass netural safety swtich on 2002 chev sliverado manuel transmission 6 wires going to switch


There is no neutral safety switch with a manual transmission ! It has a clutch start switch located on the clutch pedal arm ! LT Green an purple an white wires !

May 29, 2015 | 2002 Chevrolet Silverado 1500

1 Answer

Is there anyway you can bypass the neutral safety switch?


there is you have to locate it depending on it being standard or automatic a neutral safety switch is a switch the creates a loop when in park or neutral (might be found on shifter or trans side) on standards they are usually on the clutch pedal engine won't crank until either in park or neutral or when clutch pedal is depressed find switch and unplug it and jump wires bypassing switch keeping the circuit closed and engine should crank over while in gear with no clutch or in any gear p r n d 1 2 ect wouldn't recommend doing this however not sure why you looking to bypass this switch but can be dangerous especially in standard vehicles reaching into the vehicle to start it forgetting its in gear it could start a take off or crank and not start but lurching forward or backward

Apr 22, 2015 | 2005 Pontiac Vibe

1 Answer

Engine revs but no acceleration


Clutch plate and pressure plate seem to be too weak to pull the car. Or one of the CV joints is detached from the gear box. To test the clutch plate, park the car on flat surface. Pull the hand brake up, start the car, depress the foot brake pedal, depress the clutch pedal, put the car in 1st gear, press the gas pedal and leave the clutch pedal at once, while keeping the brake pedal depressed.
Follow one of the two following statements:
1. Engine does not shut down and remain start. (Clutch plate, pressure plate and clutch bearing defective - Replace all as a set)
2. Engine shuts down. (Clutch system is OK and does not require any repair).

May 22, 2013 | Honda Civic Cars & Trucks

2 Answers

My clutch won't engage 1997 Honda civic


Clutch plate and pressure plate seem to be too weak to pull the car. To test the clutch plate, park the car on flat surface. Pull the hand brake up, start the car, depress the foot brake pedal, depress the clutch pedal, put the car in 1st gear, press the gas pedal and leave the clutch pedal at once, while keeping the brake pedal depressed.
Follow one of the two following statements:
1. Engine does not shut down and remain start. (Clutch plate, pressure plate and clutch bearing defective - Replace all as a set)
2. Engine shuts down. (Clutch system is OK and does not require any repair).

Apr 06, 2013 | 1997 Honda Civic

1 Answer

I have a 5 speed transmission and my clutch neutral safety switch is going out. can I bypass this switch


well to clear things up, its not a "neutral safety switch", manual vehicles have a clutch safety switch!
And yes you can bypass it, follow the clutch pedal up behind the dash, you'll find the switch. pull the plug and "short" the two connections(of the plug) with a piece of wire.

What makes you say it is "going" bad? Just curious, normally it'll just stop working!

Jun 22, 2012 | 1992 Toyota Paseo

3 Answers

85' chevy manual truck ignition issues. won't start. i think its in the collumn somewhere. new keyswitch, starter,alternator, battery and cable ends.


When you say it won't start I assume you mean it will not turn over. Have you replaced the ignition switch? Not the key tumbler but the ignition switch. Have you checked the clutch safety switch?

Oct 02, 2011 | 1985 Chevrolet Chevy

1 Answer

1990 nissan pickup will not stsrt untille preeing the clutch interlock switch on dash,then start up.


try pressing the clutch pedal down at different heights and see if it will start, if so then you will need to adjust the linkages to the clutch pedal. if it still won't start, then you will need to replace the neutral safety switch.

Sep 17, 2011 | 1992 Nissan Pickup

1 Answer

When i push my clutch in my truck will not start


there is a clutch safety switch on pedal.I'm not saying to by-pass,but you can take a jumper wire and connect from one side of switch to other and see if it cranks.it is a pin switch that will be depressed by a tab on side of clutch pedal,up under dash. Just be aware if bypassed it will start in gear and is only a way to check.put parking brake on and make sure transmission is in neutral.Be safe about it.

Feb 15, 2011 | 1992 Chevrolet S-10

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...