Question about Cars & Trucks
Trying to replace window clips in a 2002 pontiac grand am
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: fuel pump
I would first take the trunk lining out and see if there is a trap door to acces the top of the fuel tank. If there is not one, you will have to drop the fuel tank out from under the car. It's easier than it looks. Just make sure you look everything over first, and make sure you have something to prop the tank up with because I'm sure it has gas in it. And remember: NO SMOKING! Loosen the strap bolts that hold the tank in place and it will drop down giving you access to the top. The fuel pump should be in the top of the tank with the float assembley. It will probly take a hammer and a flat screw driver to spin the ring to get the unit out. Once you have it loose (or before) remove the hoses and wires, remembering which goes where! Installation is reverse of the above.
Posted on Jun 08, 2008
ram a sharp chissel or pointed head centre punch through the core and prise it out .,than tap the new one in place ,,,there u go bobs ure uncle
Posted on Jan 29, 2009
You don't need to drop the tank to replace the fuel pump.
Under the carpet in the trunk there is a access cover that you can take off to access the pump. You need a good snap ring pliers to get the snap ring off to release the pump from the tank.
I wish people would have first hand knowledge of the process before they start clicking post and cost a person a lot of money and time for something that isn't needed to be done to complete the job.
Posted on Oct 11, 2009
I beleive you need to change the Power Window Switches Module in the drivers side door panel, as these connections are interlinked within this module and it is usually the first part that fails. Especially that you already changed the switches & motor in the passenger door and it still does not work. Once you remove the dual switch module in the driver's side door, you will understand what I mean. Plus it is really easy to access. Good luck! I have the same model, Claude
Posted on Jun 16, 2010
Tips for a great answer:
Jun 10, 2015 | 2002 Pontiac Grand Am
Feb 13, 2015 | 2002 Pontiac Grand Prix GTP
Sep 29, 2010 | 2002 Pontiac Grand Am
Sep 17, 2010 | 2002 Pontiac Grand Prix
Jul 25, 2010 | 2002 Pontiac Grand Prix
Mar 21, 2010 | 2002 Pontiac Grand Prix
Jul 24, 2009 | 2002 Pontiac Grand Am
44 people viewed this question
Usually answered in minutes!