Question about 2007 Hyundai Atos Prime
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the filter is behind the glove box. pull the 2 clips on both sides of glove box. then remove glove box. the filter cover should be right there and just unclip the cover and replace filter.
Posted on Jan 19, 2009
It should be the same general procedure as the 02. Open Glove box and remove contents. Remove glove box stops and or glove box shock on side. With the glove box swung out of the way remove the panel that covers the air filter. Remove and replace filter. Reinstall cover, and glove box stops.
Posted on May 10, 2009
SOURCE: need to install cabin air filter
If it's anything like my 2005 Tucson all you have to do is open glove box and find the elastic cord that comes from behind glovebox and runs through a hole in the side. Release this cord (just let it go, it won't go anywhere). Drop the glovebox down and you'll see where to replace the filter. There are 2 black clips a little ways in on either side, you have to pinch these and pull on them at the same time. The filter will pull out, replace it, slide back in, then rehook the elastic cord and close glovebox. Done!!!
Posted on Aug 17, 2009
I just did this on our 2007 Sonata. 1. open the glove box. On both sides of the glove box, there is a black tab which prevents the glove box from opening to far. The Chilton manual says to remove these, but that is more difficult then simply pressing inward on the sides of the glove box to release them from the channel. Now the glove box should open even more. Next, remove the piston arm from the right side of the glove box. You can do this by removing the panel on the side of the dash, but you first need to open the passenger door. You can also just use a screwdriver or other tool to slip the piston of without removing the dash side panel. Now with the glove box hanging fully open, you can see the cabin filter box. There are tabs on both sides of the front that you simply press together in order to slide the filter out of the box. This whole process from beginning to end should only take about 10 minutes and is very simple.
Posted on Dec 27, 2009
Tips for a great answer:
Jun 17, 2016 | 2008 Hyundai Atos 1.1
May 17, 2016 | Hyundai Cars & Trucks
Feb 05, 2016 | 2006 Chevrolet Chevrolet Malibu
Jan 20, 2016 | Cars & Trucks
Jan 10, 2015 | 1998 Hyundai Atos
Sep 12, 2014 | 2007 Hyundai Atos Prime
Feb 14, 2014 | 2009 Pontiac G8
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: