Question about Cars & Trucks

Open Question

2004 gmc sierra 2500 6.0 where is the accelerator pedal sensor

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 375 Answers

SOURCE: 2007 gmc sierra 2500 IAT sensor

Well, the IAT (Intake Air Temperature) sensor is located on the air intake duct between the filter and the throttle body (Assuming you have the 6L motor). The wires are easily visible at the plug that connects the sensor to the wiring harness. That's the easiest place to access them.

Posted on May 18, 2008

Ad
  • 124 Answers

SOURCE: where is the 4x4 encoder motor sensor located on my 03 sierra

the encoder motor sensor is inside the encoder motor. the encoder is located at the transfer case. Remove the encoder and by part number 88962315 this is the sensor. you will have to retime the motor after
hope this helps

Posted on May 06, 2009

  • 198 Answers

SOURCE: 2004 gmc sierra rear differential

remove cover.take off back wheels and calipers (or drums).turn differential to where you see small bolt/pin (5/16) horizontally (same direction as axles)on right side of differential.remove bolt/pin.A large pin (about 5"long 3/4"diameter) should slide out differential with ease ( you may have to tap one side of the large pin).turn differential to completely remove large pin.turn differential so you can see in the view window.push each axles in (they'll go in about 1 1/2"each) You may hear one of the axle C-clips fall.If not use a small telescoping magnet to remove the C-clips from the axles through the differential window.pull each axle out about 10"so they are out of the diff.Now remove the cap bolts(4-5/8"bolts) and remove the caps(mark the caps so they go in excactly the way they came out.be careful the diff might fall out.If not you may have to use a long bar or 2x4 to wedge and pry the differential out. Have a basket/crate w/rags in it to catch the diff.TIP:If you are removing the ring gear from the diff, the bolts are left handed bolts meaning you have to turn them clockwise to loosen and counter clockwise to tighten ; )

Posted on Sep 15, 2009

Testimonial: "thank you helped ALOT perfect instructions "

  • 1509 Answers

SOURCE: 2004 gmc 1500 sierra heater control stuck on

Defrost is the default position. Is the control a autyomatic temperture control unit? ( you set the temp and select automatic) if it is the system is completely electronic. You push the buttons and the control still says defrost or can you select something else and the control shows it but it just keeps coming out the defrost? If the control changes and the air comes out the defrost anyway and the cheack engine light isn't on, then the problem can be blown fuses or an air door actoater not working. Does the dash emit a clicking sound? if it does with the covers off the bottom of the dash reach around touching the different pieces till you touch the idem that is clicking. this is an acutor motor, or blend door motor. they have gears in them that wear out and break the motors aren't repairable and you just replace the ofending motor. the door that is moves can be stuck. and may have to be freed up with blaster, WD40, or other rust buster till it moves easy. maybe after getting the door to move smoothly you can get the old motor to move the door wiithout having to install a new one.

Posted on Jan 06, 2010

sean32601
  • 508 Answers

SOURCE: My 2004 GMC Sierra HD

Do you have passenger side air bag turned off?

Posted on Nov 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Service 4 wheel drive message comes on and no lights for 2and 4 wheel drive come on. On my 2004 gmc


Often lights under a dash or indicators just blow out bulbs. If more than one thing isn't lighting and are centralized check fuses to see if its blown. Bulb or fuse. IMHO. MIGHT be a sensor on tranny too. Hope not.

Here's a video with detaile dinstrauctions and other people's fuse questions. New fuses?

Kind Regards,
Scott

Interior Fuse Box Location 1999 2007 GMC Sierra 2500 HD 2004 GMC Sierra...

Amazon com Fuses Fuses Accessories Automotive

2004 GMC Sierra fuse box Questions

Kind Regards,

Scott

Feb 11, 2015 | 2004 GMC Sierra

1 Answer

Gmc 2500 timing.timed it with timing adv ance unplugged and then when plugged in the truck has a knock when you accelerate and not as much power. Also having to jump wire fuel pump til started then d


You have set it too far advanced. ECM controls timing and it runs very close to 0. If you set it advanced too far then the computer advances it more when you accelerate and that is not good.

Sep 13, 2014 | 2008 GMC Sierra 2500

2 Answers

What is the spark plug gap for a 2004 GMC Sierra 8.1 liter V8.


.060 (In thousandths of an inch) Caution! Gap is not adjustable on certain plug brands. Torque the plugs with a torque wrench no more that 15 ft lbs.

Sep 22, 2011 | 2004 GMC Sierra 2500

1 Answer

Engine light code 44 1994 GMC Sierra Pickup HD 5.7l, 4wd.


look for a serious exhaust or intake leak. look for bad wires to the o2 sensor or map sensor. just for starters.

Jul 20, 2010 | 1994 GMC Sierra

1 Answer

Where is the knock sensor on 2000 gmc sierra?


it is located on the side of the engine block just below the head usually on the drivers side.

Mar 19, 2010 | 2004 GMC Sierra 2500

1 Answer

Gmc Sierra Tailgate wont shut


Check with a Body Shop Technician for the proper description.

Jun 15, 2009 | 2004 GMC Sierra 2500

1 Answer

Mass air sensor and intake air temperature sensor


They are not the same thing but the air temp sensor is made into the mass air sensor

Nov 20, 2008 | 2004 GMC Sierra 2500

1 Answer

2007 gmc sierra 2500 IAT sensor


Well, the IAT (Intake Air Temperature) sensor is located on the air intake duct between the filter and the throttle body (Assuming you have the 6L motor). The wires are easily visible at the plug that connects the sensor to the wiring harness. That's the easiest place to access them.

May 18, 2008 | 2004 GMC Sierra 2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75842 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...