Replacement of fog lights

1. Check with Spagna Vetro: You can contact the manufacturer, Spagna Vetro, to purchase a replacement halogen light bulb for your vent hood. They may have the correct bulb with the correct part number that fits.
2. Check with the retailer where you bought it: If you bought your vent hood from a retailer, you can check with them to see if they sell replacement halogen light bulbs for the Spagna Vetro 168 Series.
3. Online retailers: You can also check online retailers such as Amazon, Home Depot, Lowe's, and others that sell lighting products. You can use the model number of your vent hood to search for compatible halogen light bulbs.
4. Specialty lighting stores: You can also check with specialty lighting stores that may carry a wider variety of halogen light bulbs, including those that are compatible with the Spagna Vetro 168 Series vent hood.

Regarding the part number, you can check your vent hood's manual or contact the manufacturer or retailer to get the correct part number of the halogen light bulb that fits your specific model of the Spagna Vetro 168 Series vent hood.

a fuse number 24,,,
The following specifications are for the Ford Contour and Mercury Mystique manufactured throughout 1995-2000.
Fuses Rating Color Circuit Engine bay fuse box 1 80 Black Power supply to main fuse box 2 60 Yellow Radiator fan 3 60 Yellow ABS 4 20 Yellow Daytime running lights 5 30 Light green Fog lamp 6 30 Light green Not used 7 30 Light green ABS 8 30 Light green Air pump 9 20 Light bue PCM module 10 20 Light bue Ignition switch 11 3 Violet PCM memory 12 15 Light bue Horn & hazard flasher 13 15 Light bue Oxygen sensor 14 15 Light bue Fuel pump 15 10 Red Right-hand low beam Passenger compartment fuse box 16 10 Red Left-hand low beam 17 10 Red Right-hand high beam 18 10 Red Left-hand high beam 19 7.5 Brown Heated door mirrors 20 10 Black Windshield wipers 21 30 Light green Electric windows 22 7.5 Brown ABS 23 15 Light bue Reverse lights 24 15 Light bue Brake lights 25 20 Yellow Door locks 26 20 Yellow Main light 27 15 Light bue Cigarette lighter 28 30 Light green Power seats 29 30 Light green Heated rear window 30 7.5 Brown Engine management 31 7.5 Brown Instrument pannel lights 32 7.5 Brown Radio 33 7.5 Brown Front and rear sidelights (left) 34 7.5 Brown Interior lighting & clock 35 7.5 Brown Front and rear sidelights (right) 36 30 Light green Air bag 37 30 Light green Heated blower 38 Unused Relays Color Circuit Location Engine bay fuse box R1 Green Daytime running lights (Canada) R2 Black Radiator fan (high speed) R3 Blue AC cut-out R4 Brown AC clutch R5 Dark green Radiator fan (low speed) R6 Yellow Starter R7 Brown Horns R8 Brown Fuel pump R9 White Low beam headlights R10 White High beam headlights R11 Brown PCM power supply Passenger compartment fuse box R12 White Interior and courtesy lights R13 Yellow Heated rear window R14 Yellow Heated blower R15 Green Windshield wiper motor R16 Black Ignition R17 Unused R18 Black One touch window switch Driver's door R19 Blue Cruise control cut-off Central fuse box bracket R20 Unused R21 Unused R22 White Fog lights Interface module bracket R23 Black Turn signals Steering column R24 White Left-hand flasher Door lock module bracket R25 White Right-hand flasher Door lock module bracket R26 Unused Bulbs / Lights Wattage Type Low beam headlamp 55 9006 Halogen High beam headlamp 55 9005 Halogen Parking / Side light 5 2357A Wedge Front turn signal 21 2357A Bayonet Rear turn signal 21 1157 Bayonet Tail light 21 1157 Bayonet Stop light 21 1157 Bayonet High mount stop light 5 2723 Bayonet Fog/Driving light 55 893 Halogen License plate 5 6418 Festoon Reverse light 21 1156 Bayonet Front sidemarker 5 2357A Wedge Glove box Map light 5 64111 Wedge Dome light 10 6411 Feston Step/Courtesy light Trunk/Cargo area Engine compartment 10 89 Wedge Instrument-general Automatic trans indicator

To get at the fog lights out you have to unclip them, 4 latches - one on each cnr of the black ousing which can be reached by reaching down past headlights.
Once loose they can be accessed by removing the wheel arch lining and pull out that way after unclipping the wiring block connnector. They look like a sealed unit but are not and come apart between the ehite and black housing. This makes it possible to be able to replace the 55w halogen bulb

if you research this.
you find.
higher power lamps can be illegal.
or overloads your wiring.
and they discovered that yellow natural lamps "tungsten type"
humans see farther, 100% opposite of all HYPE.

do you wish to be seen or both.
first choice is YOU.
I drove for 20 years at midnight and know this well.
for sure a complex subject, that can very by conditions.
fog, rain, dry ,wet, clear , whatever.
most tricks to get others to see you better (than stock)
are illegal. (front)
flashing or modulated lights, (my MC has that)
fog lamps sometimes are legal. I used them in yellow.
the fog lamp will make you more visable.
and allows, better viewing in fog.

yes, see and be seen.
The worst case is motorcycle. i have 15 years + doing that on the road. so know how bad that is, folks pulling out of blind spots.
I lived, because i drove slow. and at night slower.
time to react is the best , proactive measure, of them all.

In your car,
Halogen lamps are best.
and with clear lenses , do not run murky lenses.
+ fog lamps.

LOOK IN THE OWNERS MANUAL IN THE GLOVE COMPARTMENT,LOOK IN THE BACK INDEX OF MANUAL, LOOK UP BULB REPLACEMENT.IT WILL SHOW YOU HOW TO REPLACE FOG LIGHT BULB.USE LATEX WHEN CHANGING FOG LIGHT BULBS, BECAUSE LIGHT BULBS IS HALOGEN IF TOUCH WITH FINGERS OR HANDS, OILS FROM HANDS WILL CAUSE HALOGEN OVERHEAT AND BLOW OUT.

you replace the fog lamps by going under front bumper fascia.remove the pushpins and take down the splash shield to access the back of the fog lamps.then you remove two bolts retaining the fog lamp to the back of front bumper.besure to wear clean gloves.because fog lamps is halogen bulbs.if you touch with bare hands the oils from hands will make the bulbs over heat and blow out.

SYLVANIA H7 SILVERSTAR HIGH PERFORMANCE HALOGEN HEADLIGHT BULB -- 55 Watts, Single C-8 filament for use as either high beam or low beam; 100 percent legal halogen headlight bulbs; Features the whitest and brightest light colour similar to daylight for safer night driving; Meets all US FMVSS 108 and Canadian CMVSS 108 requirements. Fits Driver or Passenger Side Driver or Passenger Side Fits the following vehicle/s
2004 Audi S4 Base 8 Cyl 4.2L 2004: Base; 8 Cyl 4.2L RAMPAGE FOG LIGHT, BLACK METAL HOUSING, With round clear lens; Includes 100-Watt H3 halogen bulb, one lamp and a single bolt mounting system; Provides better illumination Fog Light

• 
  Fits the following vehicle/s: 2004 Audi S4 Base 8 Cyl 4.2L 2004: Base; 8 Cyl 4.2L;

Halogen bulbs are brighter and generally draw more current than standard filament ones.
Have you check that the supply fuse has not popped ?

Notes FOG LAMP BULB REPLACEMENT - FRONT

REMOVAL PROCEDURE

1. Remove the front bumper fascia deflector.
2. Disconnect the electrical connector from the front fog lamp bulb/socket. CAUTION: Refer to Halogen Bulb Caution in Service Precautions.

1. Rotate the front fog lamp bulb/socket counterclockwise to release.
2. Remove the fog lamp bulb/socket from the front fog lamp assembly.

1. Install the fog lamp bulb/socket to the fog lamp rotating clockwise until fully seated. CAUTION: Refer to Halogen Bulb Caution in Service Precautions.

1. Connect the electrical connector to the front fog lamp bulb/socket.
2. Install the front bumper fascia deflector.