Question about Toyota Cars & Trucks

Open Question

1987 toyota camry 2.0 4cylindercrank angle sensor location

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 701 Answers

SOURCE: need location of crank angle sensor on 1997 pontiac sunfire 2.2 liter

Hello oldiro: My name is Roger and I can help. From under the vehicle look up between the transmission and the side of the block. Mid motor above the pan rail there is a bolted in sensor. This should be the crank sensor.It will have two wires plugged in to it. Please rate this answer as this lets us know you received the information you asked for. Should you need further help please just ask. Thank You for using FixYa. Roger

Posted on May 06, 2009

localwonder
  • 6784 Answers

SOURCE: crank angle sensor location

The crank sensor is always located next to the crankshaft pulley. it will be inserted into the block with the top part of the housing half way out. you cant miss the wires leading into the tip of the housing next to the crank shaft pulley.

Posted on May 23, 2009

  • 1 Answer

SOURCE: Need to locate knock sensor on 1999 camry V6. Where is located.

i have toyota windom 4vz-fe i need locate knock sensor

Posted on Aug 15, 2009

cris_p
  • 62 Answers

SOURCE: Where is the knock sensor located? 2000 Toyota

remove the intake manifold ,remove radiator ,remove radiator intake and outake housing, remove fan ,remove all belts: power steering, alternator and if you have a/c, remove harmonic balancer ,remove timing belt covers, remove timing belt remove intake housinng once you have remove all the above, your freaken engine will look naked, you can see the location of the knock sensor is locate in the engine valley

Posted on Feb 19, 2010

dburns60
  • 410 Answers

SOURCE: 99 toyota camry has error messages p1133 &

These are both air fuel ratio sensors, These sensors are located in the exhaust manifolds, the front one (bank 2) is easy to get to, the one in the rear is more difficult, they require a special socket to remove and install. The O2 sensors are located behind the catalytic converter and are not the same as the A/F ratio sensors.Replacing the sensors is not what the codes are telling you.You could have a plugged air filter giving you diminished air intake. That's not a bad sensor. A mass air flow sensor could be reading bad and giving you a bad mix of fuel so that your O2 sensor reads a problem. Get it? Or the O2 sensors could be bad after all, probably not both though.

Posted on Apr 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the rpm sensor located on 1994 toyota camary


It is on the distributor shaft, along with the cam angle sensor

Jul 12, 2014 | 1994 Toyota Camry

1 Answer

Steering angles


is this an alignment questions? how to or the data for doing it?
the FSM covers that, (factory service manual ) buy one?
or alldata.com has it. click front suspension alignment.

the word lead has no meaning
try caster, camber, toe-in, axle inclination,

Apr 07, 2014 | 1987 Toyota Camry

1 Answer

Steering angles?


double posted, not stating job.
we cant guess what you are attempting , you must say.
for all i know are you just replaced all tie rods, or a new steering bear box or rack,
why must helpers guess what you did , or are doing. why?

Apr 07, 2014 | 1987 Toyota Camry

1 Answer

Where is the brake light switch located on a 1987 toyota camry


It is mounted to a bracket in close proximity to the lever that the brake pedal is attached to under the drivers side of he dash.

Jan 16, 2012 | 1987 Toyota Camry

1 Answer

1987 Toyota Camry seat belt alarm


make sure that you fasten you seat belts including passengers

Aug 29, 2009 | 1987 Toyota Camry

4 Answers

Need to locate knock sensor on 1999 camry V6. Where is located.


i have toyota windom 4vz-fe i need locate knock sensor

May 31, 2009 | 1999 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...