Question about Cars & Trucks

Open Question

2010 KTM 65 head bolt torque setting - Cars & Trucks

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: head bolts torque settings

According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.

Posted on Feb 07, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Head bolts torque settings


1st 36-39 ft-lbs, 2nd loosen one turn, 3rd 20-24 ft-lbs, 4th turn 85-95 degrees, 5th turn 85-95 degrees

Jul 04, 2016 | 2010 Ford Ranger 3.0

1 Answer

Head torque for a 2007 Kia Spectra


All Kia Spectras use the 2.0L 4 cylinder engine, and that engine has two different size cylinder head bolts that each require their own torque spec. Use the following torque sequence (see picture) and tighten them down in three steps. You will need a torque angle gauge or some way of knowing how far you've tightened the bolt for steps 2 & 3.

Apply a light coat of engine oil on the threads and under the heads of the bolts before torqueing.

M10 bolts: First step = 16.6*19.5 lb-ft, second step = Turn another 60-65 degrees, 3rd step = Turn another 60-65 degrees

M12 bolts: First step = 20.3-23.1 lb-ft, second step = Turn another 60-65 degrees, 3rd step = Turn another 60-65 degrees

secureimgcontent.asp?sg={35e8408a-ee5b-49af-b57f-38d1032aa0d4}&guid=00719062

Please let me know if you have any questions, and good luck!

Jim

Mar 06, 2016 | Kia Cars & Trucks

1 Answer

Toyota 2c. I need cylinder head and flywheel Torque settings


Toyota 2c ...
USE NEW BOLTS...
Torque sequence:
You're driving a diesel single cylinder head engine. Engine head torque has to be done in specific order and stages if not can warp head or break bolts. Suggest you get torque sequence and torque specs from your Toyota dealer, they can give you correct answer. Don't trust answers on here, if you choose wrong specs. could end up messing up head.


Flywheel - Use a Sealer on bolt, Manual Transmission 88nm/65 ft lb... Auto Transmission 74nm/55 ft lb

Aug 06, 2014 | Cars & Trucks

1 Answer

What to set torque specs for head bolts on 1968 mustang 200. engine?


it is a 3 step torque 1 st is 55 lb then 65 and final is 70-75 lb

Jun 23, 2014 | 1968 Ford Mustang 4.7

1 Answer

Lookin for head torque specs and sequence


Torque sequence ----------- ' 9 7 3 1 5 ' ' 8 4 2 6 ' ----------- Step 1: torque in sequence to 45 Ft/Lbs Step 2: torque in sequence to 65 Ft/Lbs Step 3: torque in sequence to 65 Ft/Lbs again plus 1/4 turn Step 4: Torque small bolt in rear of head to 25 Ft/Lb Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.
3.3L

Feb 07, 2011 | 1996 Dodge Grand Caravan

1 Answer

Correct torque on cylinder head bolts for Hyundai Elantra 1.8GLS


You have two bolt sizes the shorter or smaller of the two sizes is called M10 the torque is 22ft lbs +65 degrees +65 degrees again The larger of the two bolts is called a M12 the torque for these are 26ft lbs +65+65. There is a tightening order staring at the top center bolt and working in a circle They have to be torqued in three steps. If you dont under stand something about this repost and I can help you farther. If this is helpful please mark that it was I do this for free to help people DRIVE SAFE TIM

Feb 19, 2010 | 1997 Hyundai Elantra

2 Answers

I would like to know the torque settings for head bolts on a 454 big block?


Aluminum heads--
Short bolts-65 ft.lbs.
Long Bolts-75 ft.lbs.

If no aluminum heads.....80 ft. lbs.

Oct 11, 2009 | 1981 Chevrolet Corvette

1 Answer

Head bolt torque settings for a 1998 gmc 1500 5.o liter vortex


Cylinder Head Torque
1st - step, all bolts; - 22 ft./lbs. 2nd - step, long bolts; - turn 75 degrees 3rd - step, medium bolts; - turn 65 degrees 4th - step, short bolts; - turn 55 degrees fig121.png

Sep 04, 2009 | 1998 GMC Sierra

2 Answers

Head bolt settings


1st - step; - 22 ft./lbs. 2nd - step; - 58 ft./lbs. 3rd - step, loosen all bolts completely; 4th - step; - 22 ft./lbs. 5th - step; - 54 ft./lbs.fig074.png

Jun 04, 2009 | 1986 Nissan King Cab

2 Answers

Just need Torque Settings for head bolts in Laymans terms.


You wont be able to get specific torque settings. If it states in the manual "60 to 65 degrees" then you follow these instructions. This ensures that the bolts are correctly stretched. The bolts are designed to operate at a certain amount of stretch,the 60-65 degrees of rotation ensures uniform stretch.

Apr 30, 2009 | 2000 Daewoo Lanos

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...