Question about Mitsubishi Eclipse

Open Question

Check engine code p0720

Eclipse

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Murphybanton
  • 2004 Answers

SOURCE: 2001 Kia Optima

P1529 and P0720 does not seem to be understood.

P0715 means Input/Turbine Speed Sensor Circuit Malfunction.

P0118 means Engine Coolant Temperature Circuit High Input.

For more understanding visit:- http://www.troublecodes.net/Kia/

Cheers.

Posted on Aug 08, 2009

ZJLimited
  • 17970 Answers

SOURCE: check engine light with following codes p 1529

P1529 indicates that your TCM asked the ECM to turn on the check engine lamp.

The range switch and the output speed sensors are the items that are abnormally affecting the operation of the transmission. The diagnostic logic in your computer can distinguish these issues from one another, so you'll definitely want to do both. You have no diagnostic code for the input speed sensor (P0715) listed, so I have made no recommendation to replace it. In my opinion, it's not a labor-intensive repair, so I wouldn't recommend replacing it unless you have reason to believe it's bad.

DTC - P0720 (OUTPUT SHAFT SPEED SENSOR SYSTEM)
Code No. P0720 Output shaft speed sensor system
If the output from the output shaft speed sensor is continuously 50% lower than the vehicle speed for 1 second or more while driving in 3rd or 4th gear at a speed of 30 km/h or more, it is judged to be an open circuit or short-circuit in the output shaft speed sensor and diagnostic trouble code No. P0720 is output. If diagnostic trouble code No. P0720 is output four times, the transmission is locked into 3rd gear or 2rid gear as a fail-safe measure.
Probable cause
Malfunction of the output shaft speed sensor
Malfunction of the transfer drive gear or driven gear
Malfunction of connector
Malfunction of the TCM

DTC - P0715 (INPUT SHAFT SPEED SENSOR SYSTEM)
Code No. P0715 input shaft speed sensor system
If no output pulse is detected from the input shaft speed sensor for 1 second or more while driving in 3rd or 4th gear at a speed of 30 km/h (19 mph) or more, it is judged to be an open circuit or short-circuit in the input shaft speed sensor and diagnostic trouble code No. P0715 is output. If diagnostic trouble code P0715 is output four times, the transaxle is locked into 3rd gear or 2nd gear as a fail-safe measure.
Probable cause
Malfunction of the input shaft speed sensor
Malfunction of the underdrive clutch retainer
Malfunction of connector
Malfunction of the TCM

Is needed replace.

Posted on Nov 04, 2009

rhuma56
  • 3 Answers

SOURCE: fix engine codes p0700 p0715 p0720

those are internal parts of the transmission take it to ****** shop.try more then 1 you dont want to over pay

Posted on Mar 30, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What are the probable causes of DTC P0720?


According to the database the code means OUTPUT SPEED SENSOR CIRCUT MALFUNCTION.

Dec 12, 2015 | Cars & Trucks

1 Answer

Reset speedodometer after replacing speed sensor 2000 mitsubishi eclipse


you may have to reset the cpu program with a scanner to cater for the new sensor.

Dec 27, 2014 | 2000 Mitsubishi Eclipse

1 Answer

What does a po 720 mean for a plymath grandvoyager


P0720 Output Speed Sensor Circuit Malfunction

http://engine-codes.com/p0720.html :in case you would like to know in detail whats causing this

http://engine-codes.com/ :for future use in wanting to know other code meanings

Sep 20, 2012 | Cars & Trucks

2 Answers

P0720 speedometer and car speed problems


if it worked for a short time then check the wiring around the sensor you would have moved them around changing the sensor

Aug 12, 2012 | 2002 Ford Escape

1 Answer

2001 kia optima v6 with fault codes p0720, u3600, and p1529 what do they mean?


I just know P0720 and P1529, the P0720 means "Output Speed Sensor Circuit" and the P1529 mean SCAIR Sloenoid Circuit Malfunction.

The Maxivideo MV301 tool 8.5MM is a new release code scanner.

Aug 06, 2012 | 2001 Kia Optima

1 Answer

My speedometer will not work check engine light goes on and off and the overdrive indicator light flashes. All this happens intermittently with hotter weather it seemingly happens more frequently. Scanned...


code p 0500 is for the vehicle speed sensor (VSS) which works the speedo as well as the ratio changes
code p0720 refers to the output shaft sensor --ECM or transmission control module (TCM)
the vss reports to the tcm which reads the road speed and gear ratio and shifts the appropriate solenoid

May 12, 2017 | Cars & Trucks

1 Answer

Check engine light with following codes p 1529 p0720 p0715


P1529 indicates that your TCM asked the ECM to turn on the check engine lamp.

The range switch and the output speed sensors are the items that are abnormally affecting the operation of the transmission. The diagnostic logic in your computer can distinguish these issues from one another, so you'll definitely want to do both. You have no diagnostic code for the input speed sensor (P0715) listed, so I have made no recommendation to replace it. In my opinion, it's not a labor-intensive repair, so I wouldn't recommend replacing it unless you have reason to believe it's bad.

DTC - P0720 (OUTPUT SHAFT SPEED SENSOR SYSTEM)
Code No. P0720 Output shaft speed sensor system
If the output from the output shaft speed sensor is continuously 50% lower than the vehicle speed for 1 second or more while driving in 3rd or 4th gear at a speed of 30 km/h or more, it is judged to be an open circuit or short-circuit in the output shaft speed sensor and diagnostic trouble code No. P0720 is output. If diagnostic trouble code No. P0720 is output four times, the transmission is locked into 3rd gear or 2rid gear as a fail-safe measure.
Probable cause
Malfunction of the output shaft speed sensor
Malfunction of the transfer drive gear or driven gear
Malfunction of connector
Malfunction of the TCM

DTC - P0715 (INPUT SHAFT SPEED SENSOR SYSTEM)
Code No. P0715 input shaft speed sensor system
If no output pulse is detected from the input shaft speed sensor for 1 second or more while driving in 3rd or 4th gear at a speed of 30 km/h (19 mph) or more, it is judged to be an open circuit or short-circuit in the input shaft speed sensor and diagnostic trouble code No. P0715 is output. If diagnostic trouble code P0715 is output four times, the transaxle is locked into 3rd gear or 2nd gear as a fail-safe measure.
Probable cause
Malfunction of the input shaft speed sensor
Malfunction of the underdrive clutch retainer
Malfunction of connector
Malfunction of the TCM

Is needed replace.

Nov 04, 2009 | 2001 Hyundai Elantra

1 Answer

2001 Kia Optima


P1529 and P0720 does not seem to be understood.

P0715 means Input/Turbine Speed Sensor Circuit Malfunction.

P0118 means Engine Coolant Temperature Circuit High Input.

For more understanding visit:- http://www.troublecodes.net/Kia/

Cheers.

Aug 08, 2009 | 2001 Kia Optima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...