What are the specs for the raker arms on a 2001 chevy malibu 3.1?

SOURCE: Torque Specs

Torque: 210 @ 4000 rpm

SOURCE: im looking for head bolt and rocker arm torque

the way to get these specs it to spend the 14 bucks on a chiltons book for your model truck.hate to say that. i have about 20 chiltons books they are worth it trust me on this.they will give you specs diagrams and how too's of your truck.you can get them at adap,napa,carquest,autozone,and pep boys, saves time and its good for quick reffference while working on projects on your truck

SOURCE: torque specs for the rocker arms of a 1997 malibu

31 foot pounds

SOURCE: 2005 malibu maxx ball joint and lower control arm torque specs

A Ball Joint Can Usually Be Replaced Without Removing The Control Arm From The Vehicle. Place The Vehicle On Jack Stands. Remove The Shock Absorber And Install A Spring Compressor on The Coil Spring.Remove The Nut Securing The Ball Joint To The steering Knuckle And Separate The Knuckle And Then Joint. The Ball Joint Should Be Pressed,Riveted,Bolted,Or Screwed Into The Control Arm.A Service Manual Will Give The Details For The Specific Make And Model Vehicle.

SOURCE: Rocker arm torque specs on

Rocker arm torque specs for the bolts are 14 Nm (124 inch lbs.)