Question about Cars & Trucks
The blue line space before the red empty space is that the reserve for 1995 Oldsmobile Cutlass Ciera
Unlikely. IF you run continually with low fuel levels in the tank you run a very real possibility of having to buy new fuel pumps all the time .--Best policy is nothing below 1/4 full is safe.
Posted on Apr 28, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
maybe the wire is severed where the door (drver dr) pivots. thats what was wrong with mine. there is a rubber boot with crinkles in it that hold all the wires together. you can also try replacing the switch board that controls the wndws on the drvr dr. hope that helps.
Posted on Jan 20, 2009
disconnect battery,three bolts hold it to bell housing and two wires ,one is the feed the other activates the solonoid Easy job to do but dirty dirt grease and muck
Posted on Jan 24, 2009
you have long bolts and short bolts, long bolts go in positions 1,4,5,8,9 - short bolts remaining positions, all long bolts go in back of engine, toward fire wall or front of dash, those are positions starting at passenger side to drivers side, 8,4,1,5,9, so 1 is in the center position, 9 on drivers side. short bolts in front, positions passenger side 7, 3, 2, 6,10, stud is in position 10. Tighten bolts in sequence, starting at 1, long bolts get 32Nm, short bolts get 29Nm, next pass torque all to 58NM, than final pass add an angle of 100 degrees, little more than 1/4 turn with wrench. Bolts should have 11.9 on head, the tightening specification is called a torque plus angle to yield, that is why in your gasket kit is tells you to replace the bolts, it is recommended. I know, because I am the GM Manager for fastening engineering. Hope this helps
Posted on May 29, 2009
Tips for a great answer:
Dec 08, 2015 | Oldsmobile Cars & Trucks
Jan 15, 2014 | 1995 Oldsmobile Cutlass Ciera
Jul 06, 2013 | 1995 Oldsmobile Cutlass Ciera
Aug 08, 2011 | 1995 Oldsmobile Cutlass Ciera
May 09, 2011 | Oldsmobile Cutlass Ciera Cars & Trucks
Aug 14, 2010 | 1995 Oldsmobile Cutlass Ciera
May 16, 2010 | 1994 Oldsmobile Cutlass Ciera
Nov 20, 2009 | 1995 Oldsmobile Cutlass Ciera
Aug 17, 2009 | 1995 Oldsmobile Cutlass Ciera
Mar 18, 2009 | 1995 Oldsmobile Cutlass Ciera
62 people viewed this question
Usually answered in minutes!