Question about Jaguar S-Type

1 Answer

Dtc b1265 a/c

Ac cycling,all pressuses good

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jaguar Master
  • 22,219 Answers

On later jags their is a electric solonoid on the heater pipe now if this isnt closing correctly then this will cause the AC not to cool enough and a quick test for a non mechanical minded person is to clamp the heater hose with a pair of mulgrips and see what happens .

Posted on Apr 28, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What will cause a 1999 Pontiac Sunfire to not go into the extended learn mode when replacing the ign lock assembly .


Did you clear codes ? . All codes in the theft deterrent module must be cleared for a relearn.
PASSLOCK Changing - Components Description
Important: Due to component variability, the vehicle theft deterrent (VTD) system must have the learn procedure performed regardless, if the vehicle starts on the first ignition cycle after a VTD repair.
All codes in the theft deterrent module must be cleared for a relearn.
Engineers design the Passlock™ system in order to prevent theft even if the various theft deterrent parts change. The Tamper mode will engage if any of the following components change:
• The Passlock™ lock cylinder
• The instrument cluster
• The powertrain control module (PCM)
If you replace any of the above components, the system will enter the long tamper mode. If the system enters the long tamper mode, ensure that the system completes a long tamper mode cycle. During the long tamper mode cycle, the THEFT indicator will flash for the full 10 minutes. The instrument cluster and the PCM require the full 10 minutes in order to complete the learn cycle. Ensure that the ignition switch remains in RUN until the indicator stops flashing. If you turn the ignition switch before the indicator stops flashing, repeat the long tamper cycle from the beginning.
Are there any codes ?
Problem
Action
The THEFT SYSTEM indicator will not light under any circumstances.
Replace the instrument cluster.
For Chevrolet vehicles, refer to Instrument Cluster Replacement .
For Pontiac vehicles, refer to Instrument Cluster Replacement .
Multiple indicators light continuously.
Test for a loss of serial data. Refer to Data Link Connector.
Instrument cluster DTC B1021 sets.
The DTC indicates a loss of powertrain control module (PCM) serial data. Refer to Data Link Connector.
Instrument cluster DTC B1022 sets.
The DTC indicates a loss of SIR serial data. Refer to Data Link Connector.
Instrument cluster DTC B1023 sets.
The DTC indicates a loss of ABS serial data. Refer to Data Link Connector.
PCM DTC P1601 sets.
The DTC indicates a loss of PCM serial data. Refer to Data Link Connector.
PCM DTC P1629 sets.
The DTC indicates PCM Theft Deterrent failure. Refer to the appropriate diagnostic table in Engine Controls.
Instrument cluster DTC B1011 sets.
Refer to DTC B1011 Passlock Cyl Data Shorted This Ign Cycle .
Instrument cluster DTC B1012 sets.
Refer to DTC B1012 Passlock Bad R-code This Ignition Cycle .
Instrument cluster DTC B1013 sets.
Refer to DTC B1013 Passlock Bad Timing This Ignition Cycle .
Instrument cluster DTC B1014 sets.
Refer to DTC B1014 Passlock R-code Unprogrammed .
Instrument cluster DTC B1015 sets.
Refer to DTC B1015 Passlock Cluster Fail Enabled .
Instrument cluster DTC B1017 sets.
Refer to DTC B1017 Passlock R-code Learn Failed .
The indicator flashes and no instrument cluster codes are set.
Refer to DTC B1013 Passlock Bad Timing This Ignition Cycle (the diagnostic table for DTC B1013).

Apr 07, 2017 | 1999 Pontiac Sunfire

1 Answer

I got a 2000 Oldsmobile Bravda and has smart track that works when it wants to the service light comes on once and awhile. When I really need 4wd it doesn't kick in Help


There are three different transfer case's ! Which of these does your olds have ?

Transfer Case - NVG 136-NP4 (One Speed Automatic)
Transfer Case - NVG 233-NP1 (Two Speed Selectable)
Transfer Case - NVG 236 (Two Speed Automatic)

All three have an electronic control module ! When the light is on DTC'S are stored in the transfer case shift control module .

SERVICE indicator (AWD/4WD) lamp
The SERVICE indicator (AWD/4WD) lamp is an integral part of the instrument cluster and cannot be serviced separately. This lamp is used to inform the driver of the vehicle of malfunctions within the automatic transfer case (ATC) system. The SERVICE indicator (AWD/4WD) lamp is controlled by the transfer case shift control module via a Class 2 serial data message.

There are three speed sensors on the Automatic Transfer Case (ATC), two on the rear output shaft and one on the front output shaft. Each speed sensor is a Permanent Magnet (PM) generator. The PM generator produces a pulsing AC voltage. The AC voltage level and number of pulses increases as speed increases.
Vehicle Speed Sensor
One of the two speed sensors on the rear output shaft is the vehicle speed sensor (VSS). It is an input to the vehicle control module (VCM). The VCM sends this information to the transfer case shift control module via the Class 2 Serial Data bus.
Rear Propshaft Speed Sensor
The transfer case shift control module converts the pulsating AC voltage from the rear propshaft speed sensor to a Rear Propshaft Speed in RPMs to be used for calculations. The Rear Propshaft Speed can be displayed with a scan tool.
Front Propshaft Speed Sensor
The transfer case shift control module converts the pulsating AC voltage from the front propshaft speed sensor to Front Propshaft Speed in RPM to be used for calculations, and to monitor the difference between the front and rear propshaft sensor speed. It is also used in the AUTO 4WD mode of operation to determine the amount of slip and the percent of torque to apply to the front axle. The Front Propshaft Speed can be displayed with a scan tool.

Transfer Case Encoder Motor
The transfer case encoder motor is a permanent magnet D.C. motor and gear reduction assembly. The encoder motor is controlled with a Pulse Width Modulated (PWM) signal provided by the transfer case shift control module. It is located on the left hand side (drivers side) of the transfer case. When activated it turns the sector shaft of the transfer case to shift the transfer case. This circuit consists of a power supply relay (Motor Feed A circuit ) that supplies voltage to the motor. The Motor Control B circuit is a PWM driver that varies the duty cycle to control the amount of current through the motor to ground.

There are a number of codes that can set .
DTC C0300 Rear Speed Sensor Malfunction
DTC C0305 Front Speed Sensor Malfunction
DTC C0308 Motor A/B Circuit Low
DTC C0309 Motor A/B Circuit High
DTC C0310 Motor A/B Circuit Open
DTC C0315 Motor Ground Circuit Open
DTC C0374 General System Malfunction
DTC C0376 Front/Rear Shaft Speed Mismatch
DTC C0550 ECU Malfunction
DTC C0611 VIN Information Error

You don't want to just start replacing parts , that could cost $$$$$$ . You could check connections at all the sensors an the control module , but other then that ,well . Your best bet , take it to a qualified repair shop .

Feb 19, 2017 | 2000 Oldsmobile Bravada

1 Answer

Having trouble with all my speakers except my twitters in a 2007 Saturn Outlook...what do I start with? Fuses are good


Speakers get power from the amp if your system has one or from the radio , if the tweeters work it's not a fuse problem . You like listen to your stereo loud . Blew a channel in the radio or amp ?
Take it and have it checked for DTC'S - diagnostic trouble codes
DTC B1025 01: Audio Output 1 Left Front Circuit Short to Battery
DTC B1025 02: Audio Output 1 Left Front Circuit Short to Ground
DTC B1035 01: Audio Output 2 Right Front Circuit Short to Battery
DTC B1035 02: Audio Output 2 Right Front Circuit Short to Ground
DTC B1045 01: Audio Output 3 Left Rear Circuit Short to Battery
DTC B1045 02: Audio Output 3 Left Rear Circuit Short to Ground
DTC B1055 01: Audio Output 4 Right Rear Circuit Short to Battery
DTC B1055 02: Audio Output 4 Right Rear Circuit Short to Ground

Each of the audio output channel circuits (+) and (-), at the radio and audio amplifier (if equipped) have a DC bias voltage that is one half of the battery voltage. When using a DMM, each of the audio output channel circuits will measure approximately 6.5 V DC. The audio being played on the system is produced by a varying AC voltage that is centered around the DC bias voltage on the same circuit. The AC voltage is what causes the speaker cone to move and produce sound. This voltage will vary depending on what type of audio is being listened to, talk or music, and type of music, as well as the volume setting of the system. Low volume and talk settings will measure around 1V AC and less, where constant music may measure 3 V AC and slightly higher.
Do you know how to do DC voltage testing ?
Without Amplifier without UK6
Ignition OFF, disconnect the harness connector at the appropriate speaker.
Radio ON, test for 5.0-7.5 V between the signal circuit terminal A and ground.
? If less than the specified range, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the radio.
? If greater than the specified range, test the signal circuit for a short to voltage. If the circuit tests normal, replace the radio.
Test for 5.0-7.5 V between the signal circuit terminal B and ground.
? If less than the specified range, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the radio.
? If greater than the specified range, test the signal circuit for a short to voltage. If the circuit tests normal, replace the radio.
If all circuits test normal, replace the speaker.

Dec 25, 2016 | Saturn Outlook Cars & Trucks

1 Answer

Lincoln ls code B1265


The code is the cold / hot tap or actuator

Sep 11, 2014 | Lincoln LS Cars & Trucks

1 Answer

Dtc codes B 1265


duel control valve stuck or default open

Apr 27, 2013 | 2005 Jaguar S-Type

1 Answer

I have a code come up which is B1265 on a 4.3 1996 GMC Jimmy


Google it

OBD2 Codes 1996 GMC Jimmy B1265

No on has that it is a body code & not generic

Mar 04, 2013 | 1996 GMC Jimmy

1 Answer

P1781 DTC


DTC P1781 - Engine Torque Signal Circuit

This code is set during engine start up when the ECM & TCM do not communicate properly during initial power up. It will only illuminate the service light if the condition occurs in 2 consecutive start cycles, but the DTC will be stored in the failure records after the first cycle.

Hope helps.

Jun 24, 2010 | 2004 Chevrolet Aveo

1 Answer

It was running, won't start, it seems like it 's out of gas


first things to check...
make sure you have fuel pressuse there is a purge valve on the fule rail cycle the key a few times, listen for a fuel pump. them push the pin in on the purge valve and see if you have fuel spray out. if nothing better look at a fuel pump and /or filter. next make sure you have good spark get a spark load tester from your locale parts store they are about 5-10 dollars.

Apr 08, 2010 | 1991 Ford F150

1 Answer

2005 pontiac grand prix, code p0641 came on. What


DTC P0641 The powertrain control module (PCM) provides a 5-volt reference to the following sensors:

The throttle position (TP) sensor 1
The accelerator pedal position (APP) sensor 2
The engine cooling fan speed sensor
The AC pressure sensor
The fuel tank pressure (FTP) sensor
The oil pressure sensor (OPS)
The PCM monitors voltage on the 5-volt reference circuit. If the voltage is higher or lower than required, DTC P0641 will set.

Conditions for Setting the DTC
The PCM detects a voltage that is higher or lower than required on the 5-volt reference circuit. The above condition is present for 1 second. Action Taken When the DTC Sets The control module illuminates the malfunction indicator lamp (MIL) when the diagnostic runs and fails. The control module records the operating conditions at the time the diagnostic fails. The control module stores this information in the Freeze Frame/Failure Records.
Conditions for Clearing the MIL/DTC The control module turns OFF the malfunction indicator lamp (MIL) after 3 consecutive ignition cycles that the diagnostic runs and does not fail. A current DTC, Last Test Failed, clears when the diagnostic runs and passes. A history DTC clears after 40 consecutive warm-up cycles, if no failures are reported by this or any other emission related diagnostic. Clear the MIL and the DTC with a scan tool.

Yes i can be dangerous, depending which issues mentioned above has triggered the code such as a faulty gas peddle position sensor. the code can also cause a reduced engine power to activate.

Thank you for using Fixya and best advice is to have the dealer address these issues. A tech 2 scanner would be needed to address the P0641 DTC code.

Mar 19, 2010 | 2005 Pontiac Grand Prix

1 Answer

Ac problem, passenger side is cold driver's side is not.


Hello, Here is a way to ck the codes in the climate control system.
Ignition ON
Temperature selector Left Hi Right Low
Within 20 seconds, press REST and EC simultaneously for more than 5 seconds
The LED in the car flashes and the display di A
Press auto repeatedly until all DTC's are shown. Record all DTC's
Each malfunction (short circuit, open circuit, etc) has a specific DTC
The letter "E" (error) is displayed in the left of the display and the DTC is displayed in the right of the display. By pressing the AUTO button the next DTC stored in memory will be displayed
To erase, This is only possible after all DTC's are read out
Simultaneously press both AUTO buttons for more than 2 seconds
"d" will be displayed on the left side of the display window and "FF" on the right side
The only problems that I can think of that will cause this problem are as follows;
006 right heater core temp
020 right duo valve
I hop this helps. CYA Gator241

Jan 03, 2009 | 1998 Mercedes-Benz E-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...