Question about 2006 Mitsubishi Lancer

Open Question

Engine firing order

Misfiring number 4 cylinder

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

rustfarmer
  • 5309 Answers

SOURCE: what causes my 2001 mitsubishi GDI car to be firing only on number 2 and 3 cylinders

Check to see if #1 &4 use a common coil pack. If so, = likely culprit.

Posted on Jan 15, 2015

bowtie35278024
  • 1562 Answers

SOURCE: I have a Mitsubishi gallant cylinder number 1 not firing but spark plug is firing engine misfire,engine check comes on for it to start and it has a hard start help.

Check and make sure your wiring is intact for #1 fuel injector and check for injector pulse with a noid light.

Posted on Jun 08, 2015

cj_jingco
  • 1 Answer

SOURCE: what causes my 2001 mitsubishi GDI car to be firing only on number 2 and 3 cylinders

Mitsubishi chariot gdi 4g64 firing only on number 2 and 3 cylinders, 1 and 4 not firing when the engine is hot / no idle, no acceleration, no power. what is the best solution for this problem?

Posted on Sep 27, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Number 3 and 4 are not firing from coil on 2002 subaru outback 2.5


its faulty coil.

Get the compression test done on each coil.these will let you know if its faulty coil or not.

=========

It can be issue with spark plugs or faulty spark plugs. Also get the compression test done for cylinders. If any of cylinder shows low compression then required, then that particular cylinder will cause misfire.

Also get obd codes scanned, the error code will let you know which cylinder is misfiring or all cylinders are misfiring.

-----------

For your trouble shooting I suggest you to refer the help oinks below. It has step by step details for many engine misfire issues.

----------


Click the link below:-----


Ford Explorer Cylinder Misfire?

http://whoisbyme.blogspot.in/2012/06/ford-explorer-cylinder-misfire.html

---------

Engine Misfire codes on Chevrolet Malibu?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

---------

Cylinder 6 Misfire?

http://howtobyme.blogspot.com/2011/12/cylinder-6-misfire.html

------------

Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

-----

While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

----------

Ford Explorer 5.0L: Engine Miss?

http://whoisbyme.blogspot.in/2012/06/ford-explorer-50l-engine-miss.html

-----------

Oil on spark plugs and car misfires?

http://technoanswers.blogspot.in/2012/02/oil-on-spark-plugs-and-car-misfires.html

------------

Can cylinder misfire Damage the Catalytic converter?

http://schematicsdiagram.blogspot.in/2012/02/can-cylinder-misfire-damage-catalytic.html

------------

Car misfires and error code P0306 and P0303 is shown?

http://technoanswers.blogspot.com/2012/01/car-misfires-and-error-code-p0306-and.html

-----------

Chevrolet K1500 No spark, random misfire

http://repairhelpcenter.blogspot.com/2012/11/chevrolet-k1500-no-sparkrandom-misfire.html

-------------

2004 Ford F150: Engine Misfire and Lean Code?

http://whatisbyme.blogspot.in/2012/05/2004-ford-f150-engine-misfire-and-lean.html

-----------

1995 Toyota LS: Misfire at idle or low RPM

http://whatisbyme.blogspot.in/2012/04/1995-toyota-ls-misfire-at-idle-or-low.html

--------------

Toyota Corolla: Random Misfire?

http://technoanswers.blogspot.in/2012/04/toyota-corolla-random-misfire.html

----------

2006 Ford Freestar: Misfire on Cylinder Number 2?

http://whatisbyme.blogspot.in/2012/06/2006-ford-freestar-misfire-on-cylinder.html

-----------------------------


This will help.

Thanks.

Nov 28, 2012 | Cars & Trucks

2 Answers

What do I need done if codes p0171 p0174 p0301 p0305 p0316 is it major problems


OK, We'll cover the Diagnostic Test Codes (DTCs), starting with the standard definition set by SAE J2012 (Revised December 2007)
DTC P0171 "System Too Lean Bank 1"
DTC P0174 "System Too Lean Bank 2"
DTC P0301 "Cylinder 1 Misfire Detected"
DTC P0305 "Cylinder 5 Misfire Detected"
DTC P0316 "Engine Misfire Detected on Startup (First 1000 Revolutions)"

The "system lean" codes are pretty much telling you that there is way too much oxygen in the exhaust. There is too much oxygen on BOTH sides of the engine, and that is why you are getting codes for bank 1 and for bank 2. Bank 1 is the side where #1 cykinder is located and Bank 2 is the opposite side.

The misfire codes are pretty self-explanatory. #1 and # 5 cylinders are misfiring. The P0316 DTC is telling you that the misfire monitor is detecting a misfire as soon as the engine starts. This tells you that it is a very severe misfire and that the engine does not have to warm up and the car does not have to be driven to detect the misfire.

A misfire can be caused by many things it can be vacuum leaks, bad spark plugs, bad ignition cables, faulty ignition coils, fouled or malfunctioning injectors or injector circuits, blown head gasket, cracked cylinder head, burnt valves, etc.. etc..

However, look at the codes you have. Then look at the firing order for your engine. 2002 Mercury Sable is only equipped with a 3.0L 2V 6-cylinder engine.
The firing order is 1-4-2-5-3-6

Now if you take the firing order and split it in half, stack the two halves on top of each other, it looks like this:
1-4-2
5-3-6

When you look at the firing order this way, you can see that cylinders 1 an 5, 4 and 3, and 2 and 6, are "PAIRED" cylinders. They are exacly opposite in the firing order. Now, the cylinder only fires every second revolution of the crankshaft. With paired cylinders, one of the cylinders in the pair will fire on the first revolution and the other cylinder will fire on the second revolution.

Looking back at your codes, please note that the cylinders that are setting the misfire codes are paired cylinders.

Now the coil pack for your ignition is actually made up of three coils. Each coil fires a set of paired cylinders. If you look at the top of the coil, it will usually be marked with the cylinder numbers that each coil tower is supposed to connect to. The coil will look just like the firing order split and stacked as above.

With all of this said, I would say that it is VERY LIKELY that your misfire codes are being caused by a defective ignition coil.

The lean codes are a little different.

These are USUALLY caused by vacuum leaks which allow too much air into the engine that is not getting measured by the Mass Airflow (MAF) sensor and causes the engine to be getting too much air and not enough fuel (running lean).

I would take a good look at all of the vacuum hoses and lines. Ford is notorious for getting holes in the rubber parts that connect the PCV tubes.

If you do not find any obvious reasons for a vacuum leak, then you may want to fix the misfire codes, reset the computer memory, and drive the vehicle to see if the lean codes come back again. The misfires COULD be the cause of the lean codes. In a perfect world, this is not supposed to happen because the misfire monitors setting codes will not allow the oxygen sensor monitors to run and set lean codes. However, I HAVE seen cylinder misfires that have caused lean codes.

I hope this helps you to figure it out. Good luck!

Feb 03, 2012 | 2002 Mercury Sable

2 Answers

Need to know spak plug firing order for a 1996 pontiac grand am


4-cylinder:

Firing Order: 1-3-4-2

3.1 liter:

Firing Order: 1-2-3-4-5-6
jturcotte_599.jpg

Sep 04, 2011 | 1996 Pontiac Grand Am

1 Answer

Cylinder 5 misfire were is tha cylinder


CYLINDER NUMBER 5 IS STANDING IN FRONT OF VECHICLE IT WILL BE THE 5 CYLINDER COUNTING FRONT TO THE BACK CYLINDERS IS IN ORDER 1 2 3 4 5 6 THAT YOUR CYLINDER ORDER. YOU HAVE A INLINE 6 CYLINDER ENGINE.YOUR MISS FIRE COULD BE THE COIL - SPARK PLUG - CLOGGED OR FAULTY FUEL INJECTOR. ALSO INTAKE MANIFOLD VACUUM LEAK OR SLIGHT HEAD GASKET LEAK WILL CAUSE MISFIRE.

May 06, 2010 | 2002 GMC Envoy

1 Answer

Misfire on the #2 spark plug


Firing order is 1-4-2-5-3-6 Cylinders are numbered as such: Standing in front of the car looking at the engine the cylinders farthest from you on the back side of the engine are from left to right, 1-2-3 and on the front side closest to you from left to right 4-5-6.

Sep 16, 2009 | 2003 Ford Taurus

1 Answer

Misfire on number 2 cyl


Cylinders are numbered from front to rear (grille to firewall) passenger side: 1-2-3, driver's side: 4-5-6. Firing order is 1-4-2-5-3-6
Did you check by pulling #2 out while the engine is in idle to see no weakness from the engine? BTW your coil pack cost $80.

Sep 13, 2009 | 1996 Nissan Maxima

1 Answer

Ignition firing order and cable position at the coils


The 3.5L (VIN H) engine's unique ignition system has the ignition coils directly over each plug. No spark plug wires are used.

63b44ad.jpg


3.5L (VIN H) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System



The firing order for the 3.1L VIN M, 3.4L VIN E, 3.4L VIN X and 3.5L VIN H engines is 1-2-3-4-5-6. The right bank cylinders are on the cowl side (rear) of the engine compartment and are numbered 1,3,5, left bank cylinders on the front side of the vehicle, are numbered 2,4,6.


f3c010c.jpg

3.1L (VIN M) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System



e2e44c2.jpg

3.4L (VIN X) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System



81eff27.jpg

3.4L (VIN E) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System




The firing order for the 3.8L VIN K and 3.8L VIN 1 engines is 1-6-5-4-3-2. Starting at the front of the engine, cylinders in the left bank are numbered 1,3,5 and cylinders in the right bank are numbered 2,4,6.



50dbf18.jpg


3.8L (VIN 1) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System






6f4033f.jpg


3.8L (VIN K) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System


I hope help you with this, remember rated this help. Good luck.

Sep 01, 2009 | 1999 Chevrolet Lumina

1 Answer

Misfire of cylinder 2 & 5 on 04 Buick LaSabre Custom


Ok this may be something smal that may be simple to fixs; your plugs are in the wrong cylinder?

Check Your gap size .060 (In thousandths of an inch)

Im not sure of the size of engine please look below for your make?

82c1f61.jpg

Fig. 3.8L VIN 1 Engine Firing order: 1-6-5-4-3-2 Distributorless ignition system


756ae24.jpg
Fig. 3.8L VIN K Engine Firing order: 1-6-5-4-3-2 Distributorless ignition system


21520e9.jpg
Fig. 3.8L (VIN 1 and L) Engines Firing order: 1-6-5-4-3-2 Distributorless ignition system
321b2dc.jpg
Fig. 3.8L (VIN K) Engine Firing order: 1-6-5-4-3-2 Distributorless ignition system
I hope that this help!

Jun 08, 2009 | 2004 Buick LeSabre

1 Answer

Firing order for 2000 daewoo lanos


CLICK HERE

The order is 1, 3, 4, 2

Looking @ the engine from the front, the cylinders are numbered

1 2 3 4


Thank you for using FiXyA - A FiXyA rating is appreciated!

Jan 21, 2009 | 2000 Daewoo Lanos

2 Answers

Trying to locate cylinders that are misfiring


clynders 1234 are on the passenger side of the engine starting with # 1 in front then going 234

Jan 08, 2009 | 2000 Ford Expedition

Not finding what you are looking for?
2006 Mitsubishi Lancer Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...