Question about Cars & Trucks

Open Question

How do I remove a clutch pedal from a Honda Accord? I need to replace the one that snapped.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
shanat
  • 359 Answers

SOURCE: Clutch problem

check the fluid level first, if its empty this will happen, if so full it and bleed the clutch, if not it could be the slave cylinder and failing both, it could be the clutch itself, easiest way to check is to see on the gearbox if the clutch is engaging when you press the pedal down.
just ask if you need more help

Posted on Jun 17, 2008

Ad
  • 1 Answer

SOURCE: Clutch pedal bracket on my 91 Honda Civic Broke.

http://www.honda-tech.com/showthread.php?t=1220898 shows exactly how to get the pedal bracket assembly out. Did you find a replacement bracket? If so, where?

Posted on Apr 29, 2009

  • 6 Answers

SOURCE: 2005 Honda Accord Front Bumper cover replacement

easy there is a screw on both sides were bumper and fender meet just pop back fender liner its a phillips head. Then pop hood remove clips on black trim infont of radiator. Underside where bumper goes under car remove those clips and 10mm bolts after all is removed bumper just pulls off ...... may have to give it a hard **** a few times but it will come off. Should only take 15-20min to remove if its your first time

Posted on Jul 03, 2009

YellowNo5
  • 268 Answers

SOURCE: Tool needed to remove SRS Control Module fro 1997 Honda Accord

Hi, the bit is called a Torx Bit or a star bit. Don't get the type for a screwdriver, get the socket that would go on a ratchet, you'll need to put an extension on it of course to get in there. Push hard or it will strip. Give Honda a call and ask them what size it is for your car for sure, might be a 6mm or you can just buy a metric Torx Bit Set. Separately they are $3.99 at Autozone. Not sure how much the kit is. Good luck.

Posted on Oct 03, 2009

  • 1 Answer

SOURCE: daigram of 1995 Honda Civic EX plug clutch pedal ?

95 civic coupe ex brake lights wont work and the shifter locks in park position, what's wrong?

Posted on Oct 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a honda accord coupe 94 the clutch stops workin after i start the car i ihe car doest accelerates


If you mean you step on the clutch, put transmission in gear and release clutch with no engagement (pedal returns to top position) there is a good chance your clutch disc or pressure plate, or both are worn out and need replacing.
If your clutch pedal is going to the floor and not returning there could be a leak in the system, a bad clutch master cylinder or a bad slave cylinder on the transmission. Check the fluid level in the clutch master cylinder. If it is low or empty you have a leak or component failure. Visually inspect clutch master, line, slave cylinder for fluid leaks. replace as needed. If hydraulics are o.k., suspect clutch disc/pressure plate.

May 09, 2014 | 1994 Honda Accord

1 Answer

Clutch stopped working after 48 hours of being replaced


Return your Honda to where you had the clutch replaced and give them the opportunity for a do over, this time the right way.

Mar 22, 2014 | 1993 Honda Accord

2 Answers

Replace master cylinder on 93 honda accord clutch pedal snaps to floor and sticks when i try to bleed the new master cylinder i get no fluid out the slave cylinder bleeder even after pumping alot i cracked...


make sure the bleeder screw is not rusted closed some times it happens . take the bleeder screw out and step on clutch pedal but not all the way to floor see if any fluid comes out . it is possible the master is no good just because its new does not mean its good ! hope this helps

Aug 10, 2010 | Honda Accord Cars & Trucks

1 Answer

How to replace the bracket for clutch, brake and gas pedal


uuff is a big work, you need to remove all plastic under sterring wheel, it have screws on firewall, need to remove throtle cable, brake link, and clutch cable.

Jun 01, 2010 | 1987 Honda Accord

2 Answers

Was driving down the road an went to shift gear an the cutch pedal just snapped to floor. foung a leak in line an fixed. but the peadl will just snap down upon engagement it is a hydralic system


YES IT IS. YOU NEED TO BLEED THE HYDRALIC SYSTEM DOWN AT THE SALVE CYLINDER THERE A BLEEDER VALVE YOU'LL NEED TO HAVE SOMEONE PUMP THE CLUTCH PADDLE ABOUT 10 TIMES ( MIGHT NEED TO PULL UP AND DOWN PADDLE WITH HAND AT 1st TILL IT START TO GET SOME PRESSURE ) HOLD PADDLE DOWN AND OPEN BLEEDER KEEP DOING TILL NO MORE AIR OR BUBBLES COME OUT.

Nov 11, 2009 | 1995 Honda Accord

1 Answer

1996 honda accord clutch goes all the way to the floor


check the slave and clutch master cylinder for leakage. look under the dash , at the clutch master) push rod attached to the clutch pedal) . try to see if there are any leaks around it. if so have it replaced and have the system bled to remove all fluid and air stuck in the system.

Apr 04, 2009 | 1996 Honda Accord

1 Answer

2001 Honda Accord Clutch Issue


check the actual pedal and clutch linkage.  Also look for a fitting thats emitting air into the system.

Mar 24, 2009 | 2001 Honda Accord

1 Answer

I have a 1995 honda accord and the clutch goes clear to the floor and doesnt come back up


make sure the rod in the back of the pedal is in fact behind the pedal. or else your master clutch cylinder my need replacement.

Mar 11, 2009 | 1995 Honda Accord

1 Answer

Clutch pedal bracket on my 91 Honda Civic Broke.


http://www.honda-tech.com/showthread.php?t=1220898 shows exactly how to get the pedal bracket assembly out. Did you find a replacement bracket? If so, where?

Dec 29, 2008 | 1992 Honda Accord

1 Answer

Where is the adjustment for the clutch in a 1990 honda accord


Hi, The clutch adjustment is on the pushrod at the clutch master cyl. at the pedal cluster. Losen the locknut on clutch master cyl. pushrod and turn pushrod in or out to get specified stroke and height at clutch pedal. The pedal stroke should be  5.6" and the height should be  8.25".

Dec 01, 2008 | 1990 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

13735 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...