Question about Cars & Trucks

Open Question

Qualcast Concorde 32 Repair

Please can you supply an image of where the flat metal lever spring fits inside the safety switch housing. Thank You

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22219 Answers

SOURCE: my 97 t-bird turn signal

no replace the whole unit iam afraid ,if you have all the components you could always try some araldite epoxy two pack adhesive

Posted on Sep 01, 2011

Ad
ercupa190
  • 12223 Answers

SOURCE: I need a repair manual for a Qualcast 32/Concorde lawnmower, any advice please.

go please to www.repairmanualdownloads.com

God bless you.

Posted on Jun 27, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the neutral safety switch at on 2005 buick rendevous


Inside the transmission . An it's called internal mode switch .

The lever assembly-manual shaft detent with internal mode switch (IMS) is a sliding contact electrical switch assembly that corresponds to the PRNDL position selected. Each of the PRNDL positions has a unique ground pattern on four wires from the control module.
The assembly consists of two major components:
• The internal mode switch that consists of:
- The housing (1), which makes up the stationary contacts.
- The insulator (2), which makes up the moving contacts and is secured on the detent lever (4).
• The lever assembly which consists of:
- The manual shaft (3)
- The detent lever (4)
The range detection is accomplished by securing the moving contacts to the detent lever. When the driver selects a PRNDL position, the detent lever inside the transmission rotates. This rotates the insulator which in turn grounds the four wires in a unique pattern for each gear selection, corresponding to the PRNDL position selected. The IMS is electrically connected by five wires (four of which the control module supplies voltage to and one wire that is a common ground) to the transmission pass through connector.

Nov 09, 2016 | Buick Cars & Trucks

1 Answer

Transmission


Hey, I was the person who asked you if you could provide pictures on yahoo answers. Sorry I didn't get back to you in time before it closed but you might want to refer to this video: a500/a518 Transmission Part 4 - Valve Body Installation

Sep 02, 2012 | 1996 Dodge Ram

1 Answer

I need a repair manual for a Qualcast 32/Concorde lawnmower, any advice please.


go please to www.repairmanualdownloads.com

God bless you.

Jun 27, 2012 | Cars & Trucks

1 Answer

Neutral switch 2000monte carlo how to replace


Hi there:
The Neutral Safetyswitch is part of the Park Netutral Position switch and is mounted on the top of the transmission. The manual shaft runs through it and turns the internal contacts. If you remove your air cleaner housing, you should be able to see it on the top near the back of the transmission under the master cylinder...

In order to repair, the transmission side cover will have to be removed. However, first you should check the shifter cable adjustment, inspect the manual shift selector lever (top of transmission)for loose retainer nut and make sure is is not bent. With the use of a scan tool you should be able to check the switch inputs to the PCM and also make sure the problem is not related to some interference inside the shifter console.

If the shift lever inside the vehicle is NOT going to park then the problem may be with the shift interlock system or the lever inside the vehicle and not the neutral switch.

If the shifter does go in to park but the vehicle doesn't start then it could be the neutral switch, however then you should try to start it in neutral. The two systems are not related electronically and therefore should be diagnosed separate.


2_3_2012_1_26_58_pm.gif

Zoom Image link -->> HERE


The lever assembly-manual shaft detent with internal mode switch (IMS) is a sliding contact electrical switch assembly that corresponds to the PRNDL position selected. Each of the PRNDL positions has a unique ground pattern on four wires from the PCM.
The assembly consists of two major components:
1.- The internal mode switch that consists of:
- The housing (1), which makes up the stationary contacts.
- The insulator (2), which makes up the moving contacts and is secured on the detent lever (4).
2.- The lever assembly which consists of:
- The manual shaft (3)
- The detent lever (4)

The range detection is accomplished by securing the moving contacts to the detent lever. When the driver selects a PRNDL position, the detent lever inside the transmission rotates. This rotates the insulator which in turn grounds the four wires in a unique pattern for each gear selection, corresponding to the PRNDL position selected. The IMS is electrically connected by five wires (four of which the PCM supplies voltage to and one wire that is a common ground) to the transmission pass through connector.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jan 28, 2012 | 2000 Chevrolet Monte Carlo

1 Answer

1971 ford f100 pickup neutral safety switch wiring color code


Ford Neutral Safety Switch; Ford Reverse Light Switch; Backup Light Switch.

The Neutral Safety Switch wires in my 1971 Ford F100 are orange with a blue stripe.
The Reverse, or Backup Light Switch wires are black with a red stripe.

There are two sets of two wires across this combined neutral safety and backup light switch, for a total of 4 wires. Photos are at the end of this post.

The switch for the 1971 Ford F100 pickup truck is the same as in many other years and models. For details, including parts numbers, see the following quote from an expert at Ford Truck Enthusiasts:
http://www.ford-trucks.com/forums/287185-back-up-light-and-neutral-safety-switch-2.html#post5601846

The neutral switch also controls the backup lights, and is the same 1967/77.

C7TZ-7A247-A .. Neutral/Backup Switch (Motorcraft SW-600)

There is no separate backup light switch..except on 1967/68 F350's.

Neutral switch location 1967/77:

The plastic half moon shaped neutral safety switch mounts on the outside lower portion of the steering column (NOT on the transmission!).

It's activated by an inverted Y shaped lever that snaps on the shift tube

D0TZ-7B097-B .. Lever, Neutral Switch Actuator = From FTE sponsor DIRECT FORD PARTS: Ford suggested retail price: $18.72 / FTE member net: $13.23.

The switch is also still available from Ford, but the website is down so I can't post the list & net prices. .

1978 is the FIRST year the F100/350's have the neutral switch mounted on the transmission. __________________

Bill // Retired Ford Parts Manager // SoCal Chapter member // Part Number Research: 1928/2001 FoMoCo vehicles.

IMAGES
jim_pivonka.jpg
Driver side of the neutral / reverse switch showing the travel slot for the switch arm, the return tensioning spring, and the arm.

jim_pivonka_0.jpg
The front, steering wheel side of the neutral / reverse switch after removal from the steering column. The switch's two functions are actuated when the lever in the column moves the switch lever shown here to different positions as gears are selected.

jim_pivonka_1.jpg
The neutral switch is installed on the steering column near the firewall, with 5/8" bolts into the steering column (visible hole) and down column from a rectangular opening in the column housing. The actuating lever for the switch is attached to the gear shift shaft inside the housing; the lever is visibly protruding from the opening in this image.

jim_pivonka_2.jpg
Back of neutral / reverse switch, showing the wiring attachments. Black with red stripe is the backup light wiring, Orange with blue stripe is the neutral safety switch, it prevents starting in gears other than neutral & park.

Aug 03, 2010 | Ford F-100 Cars & Trucks

2 Answers

How to replace neutral saftey switch on a 1980 cadillac deville?


Use like reference guide for GM Cadillac 1967-1989 Repair Guide Neutral Safety Switch - REMOVAL & INSTALLATION

All Except 1985-89 Eldorado and Seville
See Figure 1
The neutral safety switch prevents the engine from being started in any transmission position except Neutral or Park. The switch is located on the upper side of the steering column under the instrument panel on column shift cars, and inside the shift console on floor shift models.
  1. Remove the console for access on floor shift models.
  2. Disconnect the electrical connectors.
  3. Remove the neutral switch.

To install:
  1. Place 1967-70 column shift lever models in Drive, and 1971 and later models in neutral. Locate the lever tang against the transmission selector plate on column shift models.
  2. Align the slot in the contact support with the hole in the switch. Insert a 3 / 32 in. (2.38mm) diameter pin in place. The switch is now aligned in Drive position.

1973 and later neutral safety switches have a shear-pin installed to aid in proper switch alignment so that insertion of a pin is unnecessary. Moving the shift lever from Neutral shears the pin.
  1. Place the contact support drive slot over the drive tang. Install the switch mounting screws.
  2. Remove the aligning pin. Connect the electrical wiring, and replace the console.
  3. Set the parking brake and hold your foot on the service brake pedal. Check to see that the engine will start only in Park or Neutral.
7b3f2a9.jpg

Fig. 1: Installation of a common neutral safety switch



ADJUSTMENT
See Figure 2
1974 and later cars do not have a neutral safety switch. Instead, these cars have an interlock between the lock and the transmission selector, which is non-adjustable.
  1. Place the shift lever in Neutral.
  2. Move the switch until you can insert a gauge pin, 3 / 32 in. (2.38mm) diameter, into the hole in the switch and through to the alignment hole.
  3. Loosen the switch securing screws. Remove the console first, if necessary.
  4. Tighten the screws and remove the pin.
  5. Step on the brake pedal and check to see that the engine will only start in Neutral or Park.
05843d3.jpg


Fig. 2: Adjustment of a common neutral safety switch


1985-89 Eldorado and Seville
See Figure 3

All neutral safety/back-up light switches come with a small plastic alignment pin installed. Leave this pin in place.
  1. Place the shifter assembly in the Neutral position.
  2. Remove the shifter lever-to-switch nut and the lever.
  3. Disconnect the electrical connector from the neutral safety/back-up light switch.
  4. Remove the neutral safety/back-up light switch-to-transaxle bolts and the switch from the vehicle.

To install:
  1. Position the shifter shaft in the Neutral position.

If using an old switch or the plastic pin (new switch) is broken, install a3/32in. (2.38mm) diameter pin gauge (drill bit) into the neutral safety/back-up light switch; the switch is then locked into its Neutral position.
  1. Align the flats of the shifter shaft and the neutral safety/back-up light, then, align the switch-to-tang on the transaxle. Torque the switch-to-transaxle bolts to 22 ft. lbs. (30 Nm). Remove the pin gauge.
  2. To complete installation, reverse the removal procedures. Make sure that the engine starts only in the Park and Neutral positions.
c796664.jpg

Fig. 3: Neutral start and back-up lamp switch - 1985-89 Eldorado and Seville

Hope help with this (remember rated and comment this). Good luck.

Mar 21, 2010 | 1980 Cadillac Deville

2 Answers

Car is stuck in park


Either brake switch or park/neutral safety switch is bad.

Sep 12, 2009 | 2008 Dodge Avenger

1 Answer

Replace ignition tumbler


STEP BY STEP Please Remember to Rate Me Thank You RejakWilson




WARNING: On vehicles equipped with Airbags, disable airbag system prior to performing service procedures.



  1. Disconnect battery ground cable.
  2. Remove steering wheel as outlined under STEERING WHEEL procedure.
  3. Using a screwdriver, pry cover from housing.
  4. Using lock plate compressing No. J-23653 or equivalent, compress lock plate, and pry snap ring from groove on shaft, Fig. 5. Slowly release lock plate compressing tool, then remove tool and lock plate from shaft end.
  5. Slide canceling cam and upper bearing preload spring from end of shaft.
  6. Remove turn signal (multi-function) lever.
  7. Remove hazard warning knob retaining screw, button, spring and knob.
  8. Remove pivot arm.
  9. Wrap upper part of electrical connector with tape to prevent snagging of wires during switch removal.
  10. Remove switch retaining screws and pull switch up from column, guiding wire harness through column.
  11. Reverse procedure to install.



  1. Remove turn signal switch as outlined under TURN SIGNAL SWITCH.
  2. Remove buzzer switch and spring clip. On 1990-92 models, ignition key must be removed from lock to remove buzzer switch. On 1991-92 models, switch and spring clip are one assembly.
  3. Turn lock cylinder to Run position on 1989 models or Lock position on 1990-92 models, then remove lock cylinder retaining screw and the lock cylinder.
  4. To install, rotate lock cylinder to the stop while holding housing. Align cylinder key with keyway in housing, then push lock cylinder into housing until fully seated. Lock cylinder must be in Run position to install buzzer switch.
  5. Install lock cylinder retaining screw, then the buzzer switch, turn signal switch and steering wheel.

Aug 30, 2008 | 1989 Chevrolet Celebrity

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...