Question about Cars & Trucks

1 Answer

Hw can I unlocked my car stereo, I press botton

Car stereo locked, of my Buick rendezvuoz 2002, 3.4 L, I tried pressing button #2&3, and 1&2, 1&4 but to no avail, code won't show up, how can I unlock it

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 160 Answers

You can get code at your dealer

Posted on Jun 19, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Central locking on bmw 318i boot won't lock after pressing lock button?

simple your mechanism on the inside of the boot(catch mech) is spring loaded.just spray copious amounts of wd40 deep inside. if that dosent work then your catch/keep is twisted.

Posted on Nov 10, 2008

  • 29 Answers

SOURCE: Locked out of my car stereo

To enter the code, press the minute and the hour buttons on your stereo! If you have problem or forget your code, there you'll have to hold down the AM/FM button until another code shows up. You'll then have to phone a 1-800 number, enter the authorization code, followed by the code from your CD player.

If this is the case, let me know and I'll get you the numbers!

Posted on Aug 14, 2009

  • 1 Answer

SOURCE: 1994 Buick Skylark. Lot of hesitation and jerking, power locks

HI MY NAME IS JUAN:
I HAVE A 93 BUICK SKYLARK CUSTOM
AND I HAD THE SAME HESITATION.
I CHAGED GAS FILTER, AIR FILTER, AND USE SEA FOME IN MY GAS TANK AND USE IT ALSO TO CLEAN THE INTAKE SYSTOM, AND IT HELPED ALOT. TWO MONTHS DOWN THE LINE HADE THE SAME HESITATION AND IT WAS ONE OF THE INISION COIAL PACK WAS NOT GIVING THE ELETRICAL SPARK TO THE PLUG. I CHECK IT BY PULLING THE CABLE OFF THE SPARK PLUG WITH THE CAR RUNNING AND FOUND THE ONE THAT WAS NOT GIVING SPARK. I REPLACED THE PACK FOR THAT CILINDERS PLUG AND THE PROBLEM WAS GONE.
HOPE THIS CAN HELP YOU.

Posted on Sep 21, 2009

withit92020
  • 7 Answers

SOURCE: My 2006 g35x won't stay locked the unlock botton

check for a short or a bad wire sounds like a bad conection check your conections

Posted on Aug 12, 2012

emissionwiz
  • 75066 Answers

SOURCE: 2006 Malibu antitheft reset

There is no reset except to leave the key in the ignition turned on for 10 minutes, if that does not reset it you need the dealer to inspect the problem.

Posted on Nov 06, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Toyota Avensis 1.6 2007 the trunk locks automaticly.. when I go to open the trunk it doesn't open,, only if I press Unlock botton on remote! how to fix this?


Battery may be dying in remote and your car should have a setup menu which is accessed through the mileage display. try looking there, also refer to your owners manual if you still have it

Jan 04, 2015 | 2007 Toyota avensis 1.6

1 Answer

Remote will not unlock doors can not unlock from inside


- Sit in the car with all the doors shut and windows up with your key fobs (all your fobs need to be done at the same time)
- With one of your keys turn the ignition on then off and remove the key
- Press and hold the unlock botton and then press the lock button 3 times.
- Release all buttons and the locks will bounce up and down.
- Repeat this with the other key/keys (press and hold unlock and press lock 3 times, locks will bounce)

Note: Only switch your ignition on once, doing so again while programming will reset the process and you will have to start again.

Jan 15, 2013 | 2003 BMW 5 Series

1 Answer

2002 buick century key fob problem


Sounds like the remote receiver module in the car is malfunctioning and will probably need to be replaced.

Apr 14, 2017 | 2002 Buick Century

1 Answer

We have 2 remote key pads and replaced the batteries. Still not working. the 2 car keys will not open the doors. we never used keys to open the doors. Now we are totalling locked out of the car. Any...


TO SYNCHRONIZATION REMOTES WHEN REPLACING BATTERIES,STAND 5 FEET OF THE VECHICLE.PRESS REMOTE TRANSMITTER LOCK AND UNLOCK BUTTONS SIMULTANEOUSLY FOR 7 SECONDS.HORN SHOULD CHIRP TO CONFIRM SYNCHRONIZATION.

May 18, 2011 | 2002 Buick LeSabre

1 Answer

When i try to turn my radio on it says loc hoow do i unlock it?


Does your GM car or truck Radio display LOC and does not turn on? Chevrolet, Buick, Pontiac, GMC, Cadillac, Oldsmobile vehicles used a theft system to lock the radio when power is lost. This system was used from the ealy 1990's to the early 2000's.

Instructions:
  1. If your radio displays the word LOC, you can retrieve a set of factory numbers in the radio that enable you to get a backup unlock code. If the radio says INOP, you will have to leave the key in the "ON" position, or let the car run for at least 1 hour before you attempt any unlock procedure. INOP means a secondary theft lock due to too many false attempts to unlock the radio.
  2. Looking at the face of your GM Delco radio, hold down the preset buttons 1 & 4 OR 2 & 3 (Depending on year and model) for approximately 10 seconds or until a set of 2 or 3 numbers comes up on the display. Write the numbers down.
  3. Next press the AM / FM button. A new set of 3 numbers will now show. Write these numbers down. You will then need to call a 1-800 phone number with these numbers to get the unlock code. There are many sites on the internet that can get it for you- for a small fee. Or, try calling your local GM Dealer and ask for them to do it. Many times they will do it for free. It only takes a minute.
  4. Once you have the unlock code, enter it by pressing the MIN button until the display shows the last 2 digits of the unlock code, then press the HR button until the first 2 numbers or shown. Then press the AM / FM button to enter the code. The radio will now display SEC, and normal function is restored.
Also, its possible that you need RESET your GM Radio; this is the procedure: While performing maintenance on your car, you may disconnect the radio from the battery in your GM vehicle. GM cars contain Delco radios that are protected by Theftlock, which locks the radio after it has been disconnected from a power source. Iit can only be reset and unlocked with a car-specific security code. Identifying the security code for your GM vehicle is the only way to reset the car radio and disable the Theftlock protection device.

Instructions:
  1. Turn on your car. Your Delco radio will show "LOC" in the LED display.
  2. Press and hold down both the second and third preset buttons. Hold these buttons down for at least six seconds.
  3. Write down the two- or three-digit code that appears in the LED display.
  4. Press the AM/FM button on the radio.
  5. Write down the next two- or three-digit code that appears in the LED display. You should be left with either a four- or six-digit number. Turn off your car.
  6. Call the Delco radio automated customer support line at 1-800-537-5140.
  7. Press "1" and then press the pound sign. The automated voice should respond "Invalid code, try again."
  8. Enter the number 139010 into your phone and then press the "*" sign.
  9. Enter the four- or six-digit number you wrote down from Steps 3 and 5, and then press the "*" button.
  10. Write down the four-digit code given by the automated voice.
  11. Turn on your car. Enter the Delco unlock code using the procedure outlined by your GM owner's manual. Normally, the unlock code is entered with the "HR" and "MN" buttons on your radio.
  12. Press the AM/FM button. If you have entered the code correctly, your LED display will read "SEC" and the radio will be unlocked.

Also can check your Does your GM car or truck Radio display LOC and does not turn on? Chevrolet, Buick, Pontiac, GMC, Cadillac, Oldsmobile vehicles used a theft system to lock the radio when power is lost. This system was used from the ealy 1990's to the early 2000's.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); });
Instructions:
  1. If your radio displays the word LOC, you can retrieve a set of factory numbers in the radio that enable you to get a backup unlock code. If the radio says INOP, you will have to leave the key in the "ON" position, or let the car run for at least 1 hour before you attempt any unlock procedure. INOP means a secondary theft lock due to too many false attempts to unlock the radio.
  2. Looking at the face of your GM Delco radio, hold down the preset buttons 1 & 4 OR 2 & 3 (Depending on year and model) for approximately 10 seconds or until a set of 2 or 3 numbers comes up on the display. Write the numbers down.
  3. Next press the AM / FM button. A new set of 3 numbers will now show. Write these numbers down. You will then need to call a 1-800 phone number with these numbers to get the unlock code. There are many sites on the internet that can get it for you- for a small fee. Or, try calling your local GM Dealer and ask for them to do it. Many times they will do it for free. It only takes a minute.
  4. Once you have the unlock code, enter it by pressing the MIN button until the display shows the last 2 digits of the unlock code, then press the HR button until the first 2 numbers or shown. Then press the AM / FM button to enter the code. The radio will now display SEC, and normal function is restored.
Also, its possible that you need RESET your GM Radio; this is the procedure: While performing maintenance on your car, you may disconnect the radio from the battery in your GM vehicle. GM cars contain Delco radios that are protected by Theftlock, which locks the radio after it has been disconnected from a power source. Iit can only be reset and unlocked with a car-specific security code. Identifying the security code for your GM vehicle is the only way to reset the car radio and disable the Theftlock protection device. jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); });
Instructions:
  1. Turn on your car. Your Delco radio will show "LOC" in the LED display.
  2. Press and hold down both the second and third preset buttons. Hold these buttons down for at least six seconds.
  3. Write down the two- or three-digit code that appears in the LED display.
  4. Press the AM/FM button on the radio.
  5. Write down the next two- or three-digit code that appears in the LED display. You should be left with either a four- or six-digit number. Turn off your car.
  6. Call the Delco radio automated customer support line at 1-800-537-5140.
  7. Press "1" and then press the pound sign. The automated voice should respond "Invalid code, try again."
  8. Enter the number 139010 into your phone and then press the "*" sign.
  9. Enter the four- or six-digit number you wrote down from Steps 3 and 5, and then press the "*" button.
  10. Write down the four-digit code given by the automated voice.
  11. Turn on your car. Enter the Delco unlock code using the procedure outlined by your GM owner's manual. Normally, the unlock code is entered with the "HR" and "MN" buttons on your radio.
  12. Press the AM/FM button. If you have entered the code correctly, your LED display will read "SEC" and the radio will be unlocked.

Also can check 1999-Pontiac-Firebird-Owners-Manual (page 163), there are several information about to lock and unlock.


Hope this help (remember comment and rated this).

Apr 06, 2010 | 1999 Pontiac Firebird

2 Answers

Changed battery in 2002 buick and radio will not work it says locked


You'll have to phone the car dealer for the unlock code if it's the original radio

Jan 26, 2010 | 2002 Buick Regal

1 Answer

How to unlock my 2002 car sterio


Hello! You will need to contact a GM dealership for the override code, but you will also need to provide them with some info from the radio. Follow these steps:
1) Press & hold the 2 & 3 buttons at the same time for about 10 seconds; a 2 or 3 digit code will appear, write this # down,
2) Press & hold the AM/FM button for about 10 seconds: another code will appear, write this # down as well.

You may also need to provide your VIN to the dealership as well.

Hope this helps and good luck! Thanks for using FixYa!

Oct 15, 2009 | 2002 Pontiac Grand Prix

1 Answer

How do i program a key fob for a 2004 buick lesabre


ok try this, turn the ign on but dont start the vehicle, press and hold the unlock door lock button, the door locks will lock and unlock twice, then let go press and hold the lock botton on your key fob, the door locks should lock and unlock, turn the ign. off and on off again, that should do it.

Oct 11, 2009 | 2004 Buick LeSabre

1 Answer

How do I program my keyless remote for my 2002 Rendezvous?


1. Close all doors.
2. Press and hold the Unlock button on door lock switch on drivers door.
Hold until instructed to release.
3. Insert and remove key from ignition 2 times. Do Not turn ignition.
4. Insert key in ignition a third time and leave key in ignition. Do Not turn ignition.

5. Release door lock switch on drivers door panel.
A Chime will sound 3 times indicating that you are in programming mode.
6. Press both the Lock and Unlock buttons on the remote up to 30 seconds.
A chime will sound 2 times if remote has programmed successful.
7. Repeat step 6 if you are programming additional remotes.
8. Remove key from ignition to exit programming mode.

Jul 23, 2009 | 2002 Buick Rendezvous

1 Answer

Setting up keyless remote entry with a new remote


1. Close all doors.
2. Press and hold the Unlock button on door lock switch on drivers door.
Hold until instructed to release.

3. Insert and remove key from ignition 2 times. Do Not turn ignition.
4. Insert key in ignition a third time and leave key in ignition. Do Not turn ignition.

5. Release door lock switch on drivers door panel.
A Chime will sound 3 times indicating that you are in programming mode.

6. Press both the Lock and Unlock buttons on the remote up to 30 seconds.
A chime will sound 2 times if remote has programmed successful.

7. Repeat step 6 if you are programming additional remotes.
8. Remove key from ignition to exit programming mode.

Dec 09, 2008 | 2002 Buick Rendezvous

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...