Question about Audi A8

Open Question

2001 engine diagram

A8 oil cooler

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 52 Answers

SOURCE: need diagram of how to locate on the engine

cooler located on passenger side front. Remove oil filter and find 10-15 10mm bolts. Cooler is sandwiched between filter head plate and the block, two gaskets, not much trouble to fix. Good luck...

Posted on Aug 29, 2009

  • 1 Answer

SOURCE: oil leak/tacuma auto 2001

Hi,
I have a Daewoo Tacuma wagon 2001 and the Engine is noisy when acclerate .
Please advise.
Many Thanks

cheers,

Arnold

Posted on Jul 31, 2010

clifford224
  • 1975 Answers

SOURCE: nissan rogue engine oil cooler

Below is a diagram for you but I was unable to find a part number for you. Hope this helps.

11_17_2011_12_10_56_am.jpg

Posted on Nov 17, 2011

  • 477 Answers

SOURCE: I need a diagram of engine timing marks for audi A8 V6 engine 3.0L

you dont need a diagram to see the timing marks on the top/bottom pulleys,just clean them off and run a piece of chalk around the perimeter.they are a bit obvious

Posted on Sep 13, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace oil; cooler on this year


  • Service and Repair
Oil Cooler Replacement

Removal Procedure

  1. Raise and support the vehicle. Refer to Vehicle Lifting.
  2. Drain the engine oil and remove the oil filter housing.
89116492

  1. Loosen the oil cooler outlet (1) and the inlet (2) lines from the engine block.
  2. Lower the vehicle.
  3. Remove the intake plenum.
  4. Remove the intake manifold.
89116493

  1. Disconnect the following electrical connectors from the water crossover:
    • The engine coolant temperature sender (2)
    • The engine coolant temperature sensor (4)
84936658

  1. Remove the water crossover bolts (1).
  2. Remove the water crossover upper and lower seals (2).
84942881

  1. Loosen the upper heat shield bolts on the left side of the exhaust manifold.
89116496

  1. Remove the oil cooler outlet line from the engine oil cooler.
  2. Remove the oil cooler inlet line from the engine oil cooler.
84942883

  1. Note the positioning of the 4 seals.
84972057

  1. Position the oil feed and return,lines out of the way and secure with mechanic wire.
  2. Remove the engine oil cooler, inlet and outlet nuts (1).
  3. Remove the engine oil cooler cover bolts (2).
84942883

  1. Remove the engine oil cooler cover.
  2. Remove the engine oil cooler.
  3. Clean all sealing surfaces.
Installation Procedure
84972056

  1. Install the engine oil cooler.
  2. Apply a 2 mm (0.08 inch) bead of RTV silicone sealant, GM P/N 12346240, in the groove around the engine oil cooler cover.
  3. Install the engine oil cooler cover.
Notice: Refer to Fastener Notice in Service Precautions.
84972057

  1. Install the engine oil cooler cover bolts (2). Tighten the engine oil cooler cover bolts to 30 Nm (22 ft. lbs.).
  2. Install the engine oil cooler inlet and outlet nuts (1). Tighten the engine oil cooler inlet and outlet nuts to 20 Nm (15 ft. lbs.).
  3. Reposition the oil feed and return lines.
84942883

  1. Install the oil cooler outlet and install the oil cooler inlet lines to the engine oil cooler. Use 4 new seals.
Tighten the oil feed and return lines to 30 Nm (22 ft. lbs.).
84936658

  1. Install the water crossover:
    • Position the crossover.
    • Install the upper and lower seals (2).
    • Install the water crossover bolts (1). Tighten
Tighten the water crossover bolts to 30 Nm (22 ft. lbs.).
  1. Connect the electrical connectors at the following locations:
    • The engine coolant temperature sensor (4)
    • The engine coolant temperature sender (2)
  1. Install the intake manifold.
  2. Install the intake plenum.
  3. Raise the vehicle.
89116492

  1. Install the oil cooler outlet (1) line to the engine block. Tighten the oil cooler outlet (1) line to 30 Nm (22 ft. lbs.).
  2. Install the oil cooler inlet (2) line to the engine block. Tighten the oil cooler inlet (2) line to 30 Nm (22 ft. lbs.).
  3. Install the oil filter housing to the engine block. Tighten the oil filter housing to 45 Nm (33 ft. lbs.).
  4. Lower the vehicle.

Dec 22, 2014 | 2001 Cadillac Catera

1 Answer

How can I bypass the OEM internal engine oil cooler with an external aftermarket oil cooler on a 2001 Saturn L300 3.0LV6?


Can you pipe the hot oil out to the after-market cooler, let it work, and pipe the cooled oil back in? You're not giving the internal cooler any "work" to do, but who cares, since the goal is to cool the oil.

Oct 24, 2014 | Cars & Trucks

1 Answer

Engine diagram


That is the oil cooler. Remove the oil filter. That exposes a large 'nut'. Remove the nut (and the 2 lines going in/out) and replace the oil gasket/O ring. If original oil cooler is dent or damaged, replace cooler as well. Could also just come from the lines going in and out of the cooler (put new hose clamps on).

Jan 05, 2014 | 1997 Audi A4

1 Answer

I need a diagram of engine timing marks for audi A8 V6 engine 3.0L


you dont need a diagram to see the timing marks on the top/bottom pulleys,just clean them off and run a piece of chalk around the perimeter.they are a bit obvious

Sep 13, 2012 | 2005 Audi A8

2 Answers

Audi A8 2001 manual


Owner manual or engine manual. What is your question?

Feb 10, 2011 | 2001 Audi A8

1 Answer

Oil in water. have had cooler tested at radiator


its either a blown head gasket or a cracked head

Sep 03, 2010 | 2003 Audi A8

1 Answer

Where is the oil cooler on 2001 chevy blazer


driver's side radiator tank. Two large oil cooler lines connect top and bottom. click for a diagram

http://images.wrenchead.com/smartpages/partinfo_resize/DUS/20837.jpg

Jul 27, 2009 | 2001 Chevrolet Blazer

1 Answer

Location of oil filter on 2004 audi A8l 4.2 engine


the oil filter is on the back passanger side just below the turbo the pipes from the oil cooler run into the filter housing

Mar 12, 2009 | 2008 Audi A8

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14200 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...