Question about Cars & Trucks

1 Answer

Hyundai accent headlight

Now i have replaced all fuses / relays / main fuse / still nothing but i know they work because if you pull back the turn signal the high beams work. Am I missing a fuse some where else?

Posted by on

  • Makoose The Cat
    Makoose The Cat Apr 28, 2013

    let me see if i can explain this problem with the lights and heater blower better. I had the battery replaced by a friend when he worked on car. The alt didn't work as a few things in car, head lights, blower moter door chim roof light ext. I replaced the main 100amp fuse and everything worked but the head lights and blower motor, so i replaced every fuse inside the car and all resisters and fuses in the underhood fuse box. Also replace the small white box and resister next to the underhood fuse box. The headlight bulbs were replaced and wires checked. to get the lights to work I have to pull back the turn signal for high beams only. Im running out of otions here before i give it to a shop to fix.

  • Makoose The Cat
    Makoose The Cat Apr 28, 2013

    97 HYUNDIA ACCENT sorry

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 4 Answers

Did both lights go out at the same time? And do you have blinkers, and flashers?

Posted on Apr 26, 2013

Testimonial: "evrything works fine just no headlights or heater blower"

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: Low beam headlights don't work

I have e-mailed you 2 .pdf files, one is the complete headlamp diagram, and the other is the relay locations. Please advise if you need further assistance.

Toyota Ed

Posted on Jan 02, 2009

  • 23 Answers

SOURCE: camry headlights not working

Have you checked out the switch itself? Seems like the problem might be there.
If the lamp bulbs are sill intact, that's probably the most likely solution. There's a possibility you have a short somewhere in the switch relay that will allow the highlights to turn on but not the low beams.

Posted on Mar 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2009 ford focus high beams quit working . the fuses are good I have replaced the high beam multi function turn signal assembly


Your not going to want to hear this , there is a high beam relay inside the smart junction box , it's nonserviceable . Soldered to the circuit board . Do you know what a Smart junction box is ? Is ford BCM body control module . Have you checked fuse's inside the vehicle ? F23 15amp high beam .

Mar 19, 2017 | Ford Cars & Trucks

1 Answer

2010 impala high beams do not come on, light on dash comes on, replaced bulbs still don't work, checked all fuses, look good


High Beam Headlamp Operation
Battery voltage is applied at all times to the coil and switch sides of the HIGH BEAM PCB Relay located in the underhood fuse block. When the headlamp dimmer switch is placed in the high beam position, the headlamp dimmer switch signal circuit to the BCM is pulled low signaling the headlamp high beam request. In response to this signal, the BCM applies ground through the high beam relay control circuit energizing the high beam relay. With the high beam relay energized, battery voltage is applied through the switch side of the relay, the left and right high beam fuses, and the high beam supply voltage circuits illuminating the high beam headlamps. At the same time the BCM sends a GMLAN serial data message to the instrument panel cluster (IPC) requesting the IPC to illuminate the high beam indicator. Ground for the left headlamp is provided at G101 and the right headlamp at G100.

Nov 23, 2016 | 2010 Chevrolet Impala

1 Answer

Headlights I have a 2001 impala my head lights are not working on low beam. I have replace the relay fuse still nothing. lamp switch does not come on. I have a day time mood an this is not working until I...


Pulling on the turn signal switch is called "flash to pass" and you are activating the high beam lights.
Have you checked to see if you have power in and out of the dimmer switch on low beam ?

May 28, 2013 | Chevrolet Impala Cars & Trucks

2 Answers

Dodge ram 3500 turn signal - headlight problem


WAY TO GO !!! another "great idea" from vehicle manufactures

Jun 07, 2012 | 2004 Dodge Ram 3500 Truck

1 Answer

I got a 2004 chevy trailblazer 4.2l. DRL/lowbeams don't work. All other lights (park lights, high beams, turn signal) work. Driver side DRL bulb blew. Both went out at the same time. Replaced both...


If it is anything like my 04 GMC Sierra, there is a relay panel under the hood. In that underhood box where you found the fuses, there are also relays. They pop out (the diagram is on the lid of the box). After the GMC hit 200k, the relays started going out. The high beams are on a relay, the lowbeams are on a different one. You can pop one out and replace it with the horn or foglight relay if you want to check it out. I am betting that the DRL bulb just happened to go at the same time. Mine go out regularly..I would say around every 10-15k miles. I don't know if this helps, it is just something that I have run across with a similar vehicle.

Aug 16, 2011 | Chevrolet TrailBlazer Cars & Trucks

2 Answers

1997 Suburban. Turned on headlights and truck completely died


under the hood there is a fuse box with a 50 amp fuse in it this may need to be replaced

Nov 14, 2009 | 1997 Chevrolet Suburban

2 Answers

1994 Mercedes c280 high beams not working...


At first 1994 C280 high beams began to not connect regularly when stick pushed forward, then not at all. Drove high beams by pulling and holding stick back towards steering wheel until that stopped working, too. Shop said the turn signal switch was at fault-- had seen it many times before with W202; about $160 to replace. Haven't done it yet, but should be an easy fix?

May 27, 2009 | 1994 Mercedes-Benz C-Class

1 Answer

Main fuses for the horn and air bag


Fuse #8, #18 and #22.

Below is a listing of which fuse corresponds with which circuit:

1 - 10 Amp - Transmission Controller, Gauges, Autostick
2 - 10 Amp - Right High Beam Headlight
3 - 10 Amp - Left High Beam Headlight
4 - 10 Amp - Radio, CD Player
5 - 10 Amp - Washer Motor
6 - 15 Amp - Power Outlet
7 - 20 Amp - Tail, License, Parking, Illumination Lights, Instrument Cluster
8 - 10 Amp - Airbag
9 - 10 Amp - Turn Signal Lights, Turn Signal/Hazard Indicator
10 - 15 Amp - Right Low Beam
11 - 20 Amp - High Beam Relay, High Beam Indicator, High Beam Switch
12 - 15 Amp - Left Low Beam Headlight
13 - 10 Amp - Fuel Pump Relay, Power Train Control Module
14 - 10 Amp - Cluster, Day/Night Mirror,Sunroof, Overhead Console, Garage Door Opener, Body Control Module
15 - 10 Amp - Daytime Running Light Module (Canada)
16 - 20 Amp - Fog Light Indicator
17 - 10 Amp - ABS Control, Back Up Lights, Daytime Running Lights, A/C Heater Control Cavity Fuse Circuits
18 - 20 Amp - Power Amplifier, Horn
19 - 15 Amp - Overhead Console, Garage Door Opener, Trunk, Overhead, Rear Reading, and Visor Vanity Lights, Trunk Release Solenoid, Power Mirrors, Power Door Locks, Body Control Module, Aspirator Motor
20 - 20 Amp - Brake Lights
21 - 10 Amp - Leak Detection Pump, Low Rad Relay, High Rad Relay, A/C Clutch Relay
22 - 10 Amp - Airbag
23 - 30 Amp - Blower Motor, ATC Power Module
24 - 20 Amp - Power Window Motors
25 - 20 Amp - Power Door Lock Motors, Power Seats

Apr 02, 2009 | 2004 Dodge Intrepid

2 Answers

Headlights not working


Lihgting switch must also be checked
8673aab.gif

Jun 08, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...