Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you may be able to access one for your car on line try www.edmonds.com you can also call scharm auto and truck part to see if they can help you in getting another one for your car like the one you had they sell only GM-parts and maybe able to help you.
Posted on Apr 13, 2009
it is most likely coming out of the weep hole at the water pump or the plastic fittings on the water pump to upper intake manifold they are black in color ands are L shaped with O-rings
Posted on Apr 19, 2009
SOURCE: 2004 chevy aveo that the
P0128 - the thermostat may be stuck open or has anyone
put a colder thermostat in the car,because once it starts to get cold
it will throw a SES with a colder then stock thermostat. Replace the Thermostat should fix this problem.
PO700 is a code telling you there are codes in the TCM of some late model cars where the Transmission control module has been removed from the PCM the vehicles main computer , and basically it happens when the TCM has a issue within itself or the transmission that sets a code and it sends a request for the PCM to illuminate the SES or CHECK engine light. To get at the TCM codes requires in most cases the most up to date scanner software purchased after the cars model year and as of yet is still a little iffy. Standard OBD11 scanners will generally not be able to see these codes.
P1781 is set during engine start up when the ECM & TCM do not communicate properly during initial power up. It will only illuminate the service light if the condition occurs in 2 consecutive start cycles, but the DTC will be stored in the failure records after the first cycle.
Replace the Thermostat and go to a transmission shop that can read the DTC codes with a scanner and reset the ECM for clear the codes. Most Transmission shop will do that free of charge, if not turn the Ignition key's to the on position and and pull the ECM fuse out for 30 seconds and then place it back in. Turn the ignition keys to the off position for 10 seconds and then start the car, the engine may stall but let it. Just start the engine again, the ECM is just relearning the engine and go for a test drive. This will clear all the DTC history in the ECM like the day it cam off the assembly line. Good luck and keep me posted, be glad to answer ay more question.
Posted on Oct 30, 2009
Tips for a great answer:
Dec 31, 2016 | 2004 Chevrolet Aveo
Jun 25, 2014 | 2004 Chevrolet Aveo
Apr 11, 2014 | 2004 Chevrolet Aveo
Nov 13, 2013 | 2004 Chevrolet Silverado 1500 Crew Cab
Jun 07, 2013 | 2004 Chevrolet Aveo
Aug 02, 2011 | 2005 Chevrolet Aveo
Apr 11, 2010 | 2004 Chevrolet Aveo
Sep 06, 2009 | 2004 Chevrolet Aveo
Oct 05, 2008 | 2004 Chevrolet Aveo
45 people viewed this question
Usually answered in minutes!