Question about 2008 Mitsubishi Lancer GTS CVT Sedan

Open Question

Mitsubishi pcv valve location and replace - 2008 Mitsubishi Lancer GTS CVT Sedan

Posted by Anonymous on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 1776 Answers

SOURCE: where is pcv valve located for 2000 mitsubishi

It is located mounted to the valve cover on top of the engine. Hope this helped and best wishes.

Posted on Sep 30, 2009

  • 1244 Answers

SOURCE: where i can locate the pcv valve for a mitsubishi

in the intake manifold

Posted on Jan 17, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Location of pcv valve for 2004 mitsubishi endevor

As you are looking at the Engine bay, on the top of the forward valve cover, left hand side. You will see it screwed in to the valve cover with a hose connected to it, about an 1.5 inchs long.

Jun 05, 2014 | 2004 Mitsubishi Endeavor

1 Answer

Where is the pvc val located on 2001 Mitsubishi Galant

The pcv valve will be on the valve cover. It will have a tube coming to it. You can pull it out to remove it. Shake the pcv valve, if it doesn't rattle, it needs to be replaced.

Apr 10, 2013 | 2001 Mitsubishi Galant

1 Answer

Location of pcv valve on 2008 ford taurus 3.5

On 3.5L engines, the PCV Valve is located on the rear valve cover (see pictures bellow). Please note: the PCV valve must be replaced if it's removed. Access to the valve is easier if you remove the upper intake manifold. However, this is not absolutely necessary and if you are already a little mechanically inclined you can do it the way you would replaced any other PCV valve.

    -A 19mm open wrench will make your life a lot easier if the PCV valve is a bit tight. It is in an awkward spot to apply pressure.

    -Disconnect the electrical connector from the valve. There is a small pin or locking device on the wire that you will have to slightly depress for the connector to release.

    -Disconnect the hose from the valve and turn the hose clockwise so that you have a bit of room to work with.

    -Turn the PCV valve counterclockwise and remove from the valve cover. Pay close attention to the position of the valve at the point when it is to be removed. The new PCV valve will go in at that same position. Why is this important? It is possible to install the PCV valve facing in the opposite direction. Once the PCV valve in and locked it in place, it damages the locking mechanism. Therefore, if you remove it you will have to throw it away and purchase a new one.

    -You just saved $130 - $150 to have the PCV replaced at the dealership...


Apr 07, 2013 | 2008 Ford Taurus SEL

1 Answer

Just bought and want to replace PCV valve on a 2004 Mits lancer 2.0 Purchased part No PCV1171 pc 228 from Auto Zone , is this the correct part and need location also any help will help,--------norm

PCV Valves ---NEVER need to be replaced

They can be cleaned every 3 to 5 years

They have NO effect on your engine performance

They only regulate crankcase pressure & fume

Take it back,& clean your old one
On valve cover

Jul 24, 2011 | Mitsubishi Lancer Cars & Trucks

1 Answer

Where is the pcv valve on a 1995 mitsubishi montero sr

It should be located on the driver side of the engine, installed into the valve cover.

May 12, 2011 | 1994 Mitsubishi Montero

1 Answer


your pcv valve is always in the valve cover and goes to the hose that goes from yourair cleamer to your intake

Nov 21, 2010 | 2004 Mitsubishi Diamante

1 Answer

Need to replace pcv valve

should be located in the valve cover just pull it out and pop the hose off of it and throw the new one on.

Sep 30, 2010 | 2006 Mitsubishi Raider

1 Answer

Where is pcv valve located for 2000 mitsubishi montero sport

It is located mounted to the valve cover on top of the engine. Hope this helped and best wishes.

Sep 30, 2009 | 2000 Mitsubishi Montero Sport

2 Answers

Location of pcv valve on 03 ford focus
Here's a picture to locate it..
So, when looking at the engine from above, on the right of the exhaust.

Procedure to replace it
1) Lift and support the front end of your car, or drive up on ramps
2) Get under the front of your car. The PCV Valve is located behind the exhaust manifold, a few inches below the valve cover.
3) Push up on the PCV valve to pop it out of the tube, or pull. You can get it out of the rubber tube with some effort.
4) Remove the rubber elbow from the top of the PCV valve. This can be re-used if it's not squishy. It can also be replaced cheaply.
5) Put the elbow on the new PCV Valve
6) Re-attach the elbow to the PCV tube
7) Push the new PCV valve back down into the large rubber tube

Sep 25, 2009 | 2003 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

78238 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides