Question about 1995 Chevrolet G20
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: There is no air flow
You need part GM Part number 89018675 or ACDelco 15-73596. The Mode Selector Actuator. What happens is the part is a CHEAP part POORLY designed and when it goes to turn the flaps inside the HVAC unit its the plastic gear slips instead of turning the flap!!!
Just to forward you you might want a deal to install this art for you unless your good at fixing your own vehicle, because you need SMALL sockets and a lot of patience to get this part in!!!
The part is ALMOST directly above the steering shaft for your steering wheel, so theres a lot you got to remove before you will even see them!!!
I only recommend you to have a dealer put this part in for you, unless you have your own service manual!!
Because there is 5 of these darn things and if you pick the wrong one you will have to do it all over again!!!
3 on the Drivers side and 2 on the Passengers side!!
But replacing this part SHOULD solve all your problems!! AS it did for me and i was having the same issues as you have described!!
Posted on Jul 22, 2008
there is an electric motor that moves the linkage to change where the air comes out..its under the dash to the right of the gas pedal........the problem is likely the linkages form that motor to your blend door that directs the air.its called the Heater Blend Door Actuator
hope this helps.......Good Luck!
Posted on Dec 14, 2008
the ac blend door is out of adjustment or the the actuator is not working look behind the glove box and watch the arm move
Posted on Jul 24, 2009
the idea of the switch is run on vacuum and is not making contact with the switch it self either worn contacts in the switch itself **** as an obstruction as well or the vent door is stuck in just that position either behind the glove box or the ash tray are the vacuum lines one of them may be pinched off or the door needs a bit of help until you can free it up
Posted on Sep 08, 2009
Some thing you could look at would be this. The control is usually fed by a vacuum line or small hose thats is connected to your intake manifold.
With a cold engine,look for a skinny vacuum hose that runs from the intake toward the fire wall . It should be going inside the cab and connecting to the A/C vent control.Some times the hose becomes disconnected or splits or cracks due to heat under the hood.
Thats usually the trouble.
I hope this helps you.
Posted on Oct 06, 2009
Tips for a great answer:
Dec 11, 2016 | 1995 Chevrolet G20
Feb 27, 2015 | 1995 Chevrolet G20
Jul 31, 2011 | 1995 Chevrolet G20
Jul 02, 2010 | 1992 Chevrolet G20
Jul 18, 2009 | 1995 Jeep Cherokee
Oct 23, 2008 | 2001 Ford Expedition
Aug 05, 2008 | 1995 Chevrolet G20
49 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: