Question about Cars & Trucks

Open Question

Horn module for 2005 pontiac wave

Horn doesn't work can't find wire harness location

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 611 Answers

SOURCE: 2000 pontiac bonneville wiring harness

u can get one to use out of a srvice book at the libruary

Posted on Jun 15, 2008

Ad
  • 1 Answer

SOURCE: horn doesn't work on 2005 Pontiac Vibe. Can't

On the 06 Vibe the horn is located just to the right of center, almost below the hood latch, in front of the radiator. It looks like a small round speaker...
check to make sure the wire is plugged in, it can come lose or even fall out. it is easy to check and fix.

If that does not work, my best guess would be that either the horn is blown or the wiring is messed up.

good luck.

Posted on Apr 02, 2009

  • 84 Answers

SOURCE: I want to disable XM radio and OnStar on my 2005

I have disabled factory xm/onstar units from many cars with no issue. i believe the onstar/xm units are both located in the trunk of you car behind the carpet (usually labeled accordingly). If you can find the fuse dedicated to the unit you can pull that. I have found the fuse is sometimes located on the unit. If you cant find the units then you can pull out the radio and unplug them from the back (more often than not it will be the smallest harness coming out the back). A quick way to test... have your car on and pull one plug at a time... make sure, once you have located it, test you audio (some harnesses are for amplified audio systems). The only neg. effect i have seen (rarely) has been the loss of the door chime.

Posted on Apr 26, 2010

  • 14036 Answers

SOURCE: where is the horn located

YOU HAVE TO REMOVE RIGHT SIDE HEADLIGHT HOUSING TO GET TO HORN.

Posted on Aug 21, 2010

HansPP
  • 2510 Answers

SOURCE: the horn doesn't work.

The horn is located at the front of the vehicle near the radiator. Before you even look at the horn, check the fuse - the horn has its own fuse. Then check the horn relay and then the horn. Lastly, if the horn still does not work check the horn switch/button

Posted on May 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 toyota corolla horn doesn't work


You can replace the horn. Check to see if the wires connected to the horn have power. Check with a test light. If power is present then the horns are bad.

Apr 19, 2012 | 2005 Toyota Corolla

1 Answer

V50 horn doesn't work


Press panic button on the remote to check if horn is broken or if the switch in the steering wheel does not work.
Also check fuse for steering wheel module.

Apr 01, 2012 | 2005 Volvo V50

1 Answer

How to fix a horn on a 2003 cavalier.... The fuse is good, so I know it's not that. Please help!


The horn is located on in the right front fender behind the wheel well.You need to remove the plastic cover around the front part of the wheel well and pull it back enough to see the horn.Remove the wire from the horn and you can use a test light to see if you are getting power to the horn.The ecm(engine control module) is right by the horn so be careful with the wires harness.If you don`t have a test light you can use a piece of wire and hook it to the battery and put power to the horn.It should beep.If not replace the horn.If it does work then you will need to trace the wire back to the relay center under the hood.Hope this helps.Good luck.

Feb 17, 2012 | 2003 Chevrolet Cavalier

1 Answer

Pontiac grand am gt '99 horn doesn't work


If you bought the car at a dealership, all saftey related problems should have been repaired before the vehicle is sold, at least thats the law in Canada, If your air bag light is not on, the air bag should work correctly, the air bag module is the center of the steering wheel where the air bag is contained, usually the horn circuit is seprate from this module and is more common for a clock spring contact to cause you issue. The clock spring is the contact point to allow the steering wheel to turn and yet keep contact with all the other steering wheel controls

Jan 13, 2012 | 1999 Pontiac Grand Am GT

1 Answer

Pontiac sunfire interior lights, horn and blinkers do not work


They are talking about the body control module, but I'm not sure they are right. The horn does not need the bcm to work. See diagram below. The horn relay is energized by the horn switch on the steering wheel. The switch also signals the bcm, but that is not used to power the horn.

0996b43f80241a74-jnh1p0frnkt3q2fbcpfimq4v-3-0.gif
The turn signal does not use the bcm at all. The problem there may be the switch or the wire. See diagram below.



0996b43f80245517-jnh1p0frnkt3q2fbcpfimq4v-3-2.gif


The instrument lights DO REQUIRE the bcm, but can be rewired to bypass the bcm. The gray wire from the bcm in the diagram below powers the instrument lights. You can cut the gray wire and splice it to the brown wire from the multi function switch. Find the brown wire coming out the bottom of the steering column, skin some insulation off the wire and verify it has 12 volts when the parking lights are on. Do not cut the brown wire--just attach the gray wire to it. You will not be able to dim the lights, but they will come on.



0996b43f80241223-jnh1p0frnkt3q2fbcpfimq4v-3-5.gif

Aug 07, 2017 | 2005 Pontiac Sunfire

2 Answers

Can you supply me with the colour code for the wiring on the alarm/central locking unit under the dash on a 2002 vw golf ? i am fitting a remote start alarm and when i remotely lock the doors i need the vw...


This is what I have for the Golf 2001:

' ITEM ' WIRE COLOR 'POL' WIRE LOCATION '
' 12V 'red '+ 'ignition harness '
' STARTER 'red/gray '+ 'ignition harness '
' IGNITION 'black '+ 'ignition harness '
' ACCESSORY 'black/red '+ 'ignition harness '
' POWER LOCK 'yellow/blue '- 'drivers door module *1 '
' POWER UNLOCK 'green/red *2 '- 'drivers door module *1 '
' LOCK MOTOR 'purple/yellow ' 'drivers door module *1 '
' UNLOCK MOTOR 'blue/yellow ' 'drivers door module *1 '
' DISARM DEFEAT 'pur/yel or blu/yel ' 'passengers door module *3 '
' PARKING LIGHTS + 'gry/red & gry/blk ' 'drivers kick panel '
' HEADLIGHTS 'yellow/red '+ 'headlight switch '
' DOOR TRIGGER 'blue/gray *4 '- 'comfort module *5 '
' DOME SUPERVISION 'blue/gray '- 'comfort module *5 '
' TRUNK/HATCH PIN 'brn/blk or brn/blu '- 'hatch light '
' HOOD PIN 'brown/red '- 'comfort module *5 '
'TRNK/HTCH RELEASE 'brown/black '- 'comfort module *5 '
' FCTRY ALARM ARM 'arms w/ lock ' ' '
' FCTRY ALRM DISARM 'disarms w/ unlock ' ' '
' TACHOMETER 'green/stripe ' 'ignition coil '
' SPEED SENSE ' ' ' '
' BRAKE WIRE 'red/black '+ 'drivers kick panel '
' HORN TRIGGER 'black/yellow '+ 'comfort module *5 '
' WIPERS 'grn/yel and green '+ 'wiper motor

*1 The drivers door module is located in the drivers door.
*2 A double pulse will unlock all doors and disarm the factory alarm.
*3 The passengers door module is located in the passengers door.
*4 This wire will read the dome light delay. The avoid the dome light delay, use the separate door trigger wires and diode isolate each one. They are brown/white and are all located in their own door at their own door module.
*5 The comfort module is the main control module located under the drivers side of the dash.

Use this diagram for the door trigger isolation: motorsport.com/images/install_notes/149.jpg

Use DIAGRAM A.


Hope this helps.

May 22, 2011 | Volkswagen GTI Cars & Trucks

1 Answer

Location of the Horn Relay on a 2005 Ford Taurus Horn doesn't work fuse is Ok and wiring looks good, as well as the horns.


horn may be bad too.

Visual Inspection Chart Mechanical Electrical
  • Horn
  • Horn switch
  • Horn relay
  • Battery junction box (BJB) fuse 101 (60A)
  • Central junction box (CJB) fuses:
    • 216 (15A
    • 230 (15A)
  • Wiring harness
  • Loose or corroded connections
  • Speed control servo or jumper
  • Clockspring
  • Generic electronic module (GEM)


horn relay is in central junction box (fuse panel) under left side of dash.

Nov 03, 2009 | 1999 Ford Taurus

1 Answer

HORN DIAGRAM FOR A DODGE RAM 1500 (CONNECTIONS)


Battery Constant 12v+ Positive Wire (+): Black/Orange And Red/White
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness
Starter Positive Wire (+): Yellow
Starter Positive Wire Location: Ignition Switch Harness
Ignition Positive Wire (+): Blue (16 Gauge)
Ignition Positive Wire Location: Ignition Switch Harness
Second Ignition Positive Wire (+): Yellow/Red
Second Ignition Positive Wire Location: Ignition Switch Harness
Accessory Positive Wire (+): Blue (10 Gauge)
Accessory Positive Wire Location: Ignition Switch Harness
Second Accessory Positive Wire (+): Orange
Second Accessory Positive Wire Location: Ignition Switch Harness
Parking Light Positive Wire (+): Black/Yellow
Parking Light Positive Wire Location: At Headlight Switch
Power Door Lock Positive Wire (+): Orange/Violet
Power Door Lock Positive Wire Location: In Drivers Kick Panel, White 6-Pin
Power Door Unlock Positive Wire (+): Pink/Violet
Power Door Unlock Positive Wire Location: In Drivers Kick Panel, White 12-Pin
Door Trigger Negative Wire (-): Yellow
Door Trigger Negative Wire Location: At Headlight Switch
Domelight Supervision Wire: Use Door Trigger (Requires Relay)
Domelight Supervision Wire Location: N/A
Horn Negative Wire (-): Black/Red
Horn Negative Wire Location: At Steering Column Harness
Tachometer Wire Negative Wire (-): Gray
Tachometer Wire Negative Wire Location: At PCM, Connector 1, Pin A7. The PCM (powertrain control module) is located on the firewall next to the wiper motor.
Brake Light Positive Wire (+): White/Tan
Brake Light Positive Wire Location: At Switch Above Brake Pedal
Factory Alarm Disarm Wire (-): Black/Orange (To disarm requires a (-) negative through a 1565 ohm resistor and an extra relay to connect.)
Factory Alarm Disarm Wire Location: In Drivers Kick Panel, White 12 Pin Plug
Factory Anti-Theft System: N/A
Factory Anti-Theft System Location: N/A

Aug 22, 2009 | 1998 Dodge Ram 3500 2WD

1 Answer

Horn doesn't work on 2005 Pontiac Vibe. Can't


On the 06 Vibe the horn is located just to the right of center, almost below the hood latch, in front of the radiator. It looks like a small round speaker...
check to make sure the wire is plugged in, it can come lose or even fall out. it is easy to check and fix.

If that does not work, my best guess would be that either the horn is blown or the wiring is messed up.

good luck.

Mar 24, 2009 | 2006 GMC Sierra 1500HD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...