Question about 1991 Toyota Corolla

1 Answer

What are the size of the 5a engine head bolts

I want to pull off my toyota 5a engine head but dont know the size tool to pull the head bolts.....u can email me damionharrison53@gmail.com

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 4,514 Answers

Wait du u have a repair/rebuild manual for exact details--library sec629 hasum or online--mechanics usually dont perform w/out these

Posted on Apr 25, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 417 Answers

SOURCE: Changing front brake pads

You shouldn't need to remove the calipers altogether just to replace the pads. You have remove the split pins or retaining springs on the old pads, then prize back the caliper pistons enough to remove them. Then push the pistons back some more enough to get the new pads in. Then reassemble and test.

Posted on Oct 23, 2008

inf12
  • 13 Answers

SOURCE: Does a 2005 Toyota Solara se V6 Require timming belt change

EVERY 90,000 MILES OR 72 MONTHS ON A 3.3 ENGINE
2.4 DIESEL 100,000 MILES

Posted on Feb 11, 2009

  • 701 Answers

SOURCE: torque specs for toyota tercel

Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using6bd0ae1.jpg FixYa. Roger

Posted on Apr 15, 2009

  • 104 Answers

SOURCE: torque for head bolts for 1984 Toyota Corolla

head bolt toque specs are 40-47 ft-lbs

Posted on Apr 17, 2009

terseo
  • 92 Answers

SOURCE: torque specs for 1998 tercel 1.5L

Main Bearing Cap Torque-42 Ft. Lbs.
Head Bolts Step 1-33 Ft. Lbs. Step 2- Additional 90 Degrees
Rod Bearing Nuts-29 Ft. Lbs.

Hope this helps

Posted on Sep 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many torque must be pot on a crankshaft bolt of a 5A engine


The WEB:

Toyota A engine - Wikipedia, the free encyclopedia

https://en.wikipedia.org/wiki/Toyota_A_engine
WikipediaThe 3A engine is the successor of Toyota's first A engine, the 1A. .... Note: power andtorque specs for North America and Europe are from the 1988-1992 Corollas. ..... A smaller 1.5 L (1498 cc) 5A-F was produced in 1987 and the fuel injected ...

Jul 25, 2015 | 1998 Toyota Corolla Sedan

1 Answer

I broke off the bolt that tightens the serpentine belt on my 96 avalon! i need a replacement what size is it??


Your first problem is to extract the bolt. For that, you will need an extraction tool. I got mine at NAPA.

Once you have the bolt out, you can measure the size and pitch.

Nov 26, 2014 | 1996 Toyota Avalon

1 Answer

Toyota 5afe head bolts torque


Toyota 4A/ 5A-FE Cylinder Head Torque:
(a) Apply a light coat of engine oil on the threads and under the heads of the cylinder head bolts.
(b) Install the plate washer to each cylinder head bolt.
(c) Install and uniformly tighten the ten cylinder head bolts in several passes in the sequence.
Torque: 60 N-m (610 kgf-cm, 44 ft-lbf)
HINT: Cylinder head bolts are in length of 90 mm
(3.54 in.) and 108 mm (4.25 in.). Install the 90 mm
(3.54 in.) bolts (A) in intake manifold side positions.
Install the 108 mm (4.25 in.) bolts (B) in exhaust
manifold side positions.

Mar 31, 2014 | 2003 Toyota Corolla

1 Answer

CONROD TORQUE SPECIFICATION FOR 5A-FE ENGINE


ays as well as response to this question UVB the radiation. But it always recommended Vita Luminance while using safe sunscreen as per your skin sensitivity. Zinc oxide sunscreens are constructed from metallic zinc that recently been oxidised. It absorbs the UV rays and hence protects your skin from acquiring it contact with sun sun light.



http://utrimcleanseblog.com/vita-luminance/ Vita Luminance


Injection Free Solution For Youthful Skin

Jan 28, 2014 | 1991 Toyota Corolla

1 Answer

Need torque for head bolts for 2002 toyota tacoma pre runner 2.7


YOU CAN GET THEM AT ANY TOOL SHOP. PEPBOYA/CANADAIN TIRE.. GO TO THE PART DESK AND ASK THEM THE SIZE OF THE NUT AND BUY THAT SIZE OF TORQUE HEAD. THERE PC PROGRAM WILL TELL THE TEH SIZE OF BOLT IT IS - IT WILL BE METRIC 9MM.. 11MM PROB. OR BUY A WHOLE SET. OR GET A BIT OF PLAYDOUGH AND MAKE AN IMPRESSION AND GO TO THE TOOL SHOP AND MATCH IT TO THE MOULD YOU HAVE/.. BINGO

Aug 31, 2013 | 2002 Toyota Camry

1 Answer

I need too know the torque specs on head bolts and crankcam 2.4 engine


on a 2002 2.4 engine head bolts are 'torqued to distance'.

First, install all the bolts, and, in a sequential fashion, starting at the innermost, working outward, torque all bolts to 70 N-m/806 kgf-cm/58 foot lbs.

Next, mark the front side of each head bolt with a dot of paint. Retighten the cylinder head bolts 90 degrees, starting at the inner 2, and working outward.I dont thin anything has changed on this engine since then.

Mar 19, 2013 | 2005 Toyota Camry XLE

1 Answer

Send me the specification for tightening the engine bolts head,crank etc for the 4k and 5A Toyota motor.


That is a LOT of information you are asking for. I would recommend going to alldatadiy.com and subscribing to the service information for the vehicle/vehicles that you are working on for a small anual fee.

May 11, 2012 | 1983 Toyota Corolla Deluxe

1 Answer

TOYOTA HILUX 2006 engine head torque specs


it depends on the size of the screws. i recommend to set torque as 100lbs for new bolts, 90 for old bolts

Feb 29, 2012 | 2006 Toyota Hilux 3.0

1 Answer

REPLACED HEAD GASKET,WANTS TO KNOW WHAT THE TORQUE OF THE HEAD BOLT WHEN FINALLY TIGTENED


Hi Amf,
You need to tell us what engine you're working on. The usual way with modern Toyota engines is that they have a basic torque and then an angled tightening. As an example the 5A has a basic torque of 26nm and then a further tightening of 90 degrees followed by a second 90 degrees.
The engine type is very important because the torques vary from engine to engine.
Regards Johngee10

Mar 11, 2011 | Toyota Corolla Cars & Trucks

2 Answers

What tool do I use to remove a bolt from a 1993 toyota tercel head


10 MM HEX HEAD SOCKET BIT AND A BREAKER BAR.YOU NEED TO KNOW THE CYLINDER HEAD LOOSE SEQUENCE TO KEEP FROM HAVING CRACKED OR WARP HEAD.YOU NEED HAYNES OR CHILTON MANUAL.BECAUSE SOME EARLY 90S TOYOTA CARS YOU HAVE TO LOOSEN HEAD BOLTS IN SEQUENCE.

May 16, 2010 | 1993 Toyota Tercel

Not finding what you are looking for?
1991 Toyota Corolla Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...