Question about 2006 Nissan Micra 1.2
Fitted new head gasket timing chain so sump has been off new oil and filter started car runs well but excessive oil smoke from exhaust oil entering all cylinders leak test all ok
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Trying to put timing chain
no adjustment neccesary. There is a timing chain tensioner, which you will simply push back in to its body. once you do that, there should be a small hple somewhere on the body of the tensioner. That' sthere so you can piut a paper clip into it to keep the tensioner from coming out. Once you lock that in place you can remove the tensioner and than the timing chain.Once you get it all back together, just pull back on the pin and the tensioner will come out and put tension on the chain. good luck.
Posted on Jul 24, 2008
mkimdaly: There is a product on the market called "Restore" which is an oil additive designed specifically for high mileage engines with oil consumption and smoking problems. Mind you, it will not fix evey situation, but it has resolved quite a few on cars which have come through my shop. "Mechanic in a can".
If I am not mistaken, it is designed to fill in small scratches that may be in the cylinder walls. I also has an effect on lifters and on oil seals. There is also a product put out by "Lubromoly" it is a product made in Germany and you may not find it on the shelves at normal retailers, but possibly carried at repair shops which specialize in imports. I carry this product line at my shop and have had good luck with many of their other products as well. There is a company called "Worldpac" but they only sell to repair shops. The product line I am talking about, I have to buy must be bought by the case.
I am sure there may be other comparable products on the market which you may find at "OReilley's or Autozone. You need to speak to their sales people and possibly ask to talk to one of the people who are at their wholesale desk at the back who may be even more familiar with the products. FOLLOW THE INSTRUCTIONS CAREFULLY! The main reason many products don't seem to work well, is that they are not applied as the manufacturer had instructed in the can and/or box! A product as old as the hills and twice as dusty is "Marvel Mystery oil" I have used it on engines which had little or no compression and pulled the plugs, poured the oil in the cylinders and let it sit over night. I would spin the engine over in the morning to blow the oil out, screw the plugs back in and fire the engine back up. There have been many times than I have had engine regain compression because the oil freed up rings that had stuck to the pistons. This oil can be added to the motor oil and the GAS! As far as the type of oil to use in the engine: It really depends on how well you have taken care of your engine to begin with. If you have done frequent oil and filter changes and the engine is relatively clean inside, I would run a 20W-40 with the additive and in my shop, I happen to use Castrol. Although most premium oils will perform quite well. If you have an engine with a lot of sludge buildup inside it, the sludge is probably the only thing holding it together. WARNING!!!!! DO NOT USE ANY KIND OF ENGINE FLUSH DESIGNED TO CLEAN THE INTERNALS OF THE ENGINE! When I refer to this, I mean a product that instructs you to put it in, run the engine for a while, drain it and then replace the oil and filter. YOU WILL IN ALL LIKELY HOOD DO MORE HARM TO THE ENGINE THAN HELP!
I hope I have answered your question.
Posted on Jul 17, 2009
did u recently buy it used-mite of been already done--how r the other components enginewise-its an old car n theyll be more things--but if u luv it then get a haynes repair manual at the zone
Posted on Dec 30, 2009
i have a 2005 1.8 nissan sentra.i rplaced the radiator becuause it was leaking.so when i did i took it for a test drive and the needle went to hot then back down to middle ways between the C & H BACK IN FORTH.so i replaced the thermostat. now as far as i can tell it is staying in the middle of C & H. i can't feel no water though cerulating through the top or bottom hose of the radiator. so now that i told you what i done so far my question is???? ( my heater is not working in the car it is blowing out cold air & i left the car runnng for about 45 min. even took it up and down the road.still cold air.what do you think i need to do?????????? )
Posted on Jan 07, 2010
Tips for a great answer:
Apr 17, 2017 | Nissan Cars & Trucks
Apr 12, 2009 | 2003 Nissan Altima
Dec 04, 2016 | Kia Cars & Trucks
Dec 13, 2015 | Nissan Cars & Trucks
Oct 22, 2015 | Nissan Almera Cars & Trucks
Mar 12, 2015 | 1985 Nissan Maxima
Mar 31, 2014 | 2001 Nissan Frontier Crew Cab
May 08, 2017 | 1999 Chevrolet Suburban
Oct 04, 2010 | 1993 Lexus Es 300
130 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: