Question about 2011 Ford Transit Connect

Open Question

Sliding door lock removal - 2011 Ford Transit Connect

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How To Install Replace Power Sliding Door Lock Actuator Chrysler Town and...


How To Install Replace Power Sliding Door Lock Actuator Chrysler Town and Country 01-07 1AAuto.com

on Apr 05, 2012 | 2001 Chrysler Town & Country

2 Answers

How to remove child lock on rear doors?


Show me how to take the safety child lock off switch also I need a picture of this location on the door

Jul 20, 2010 | 2008 Chrysler Town & Country

1 Answer

Power sliding door will not open at all manually with remote or with door locks tried to remove iod fuse and sliding door fuse but still dont open thanks


either something jammed in track/lock-- or actuator rod broke or disconnected from lock --need to remove interior door panel to get to lock release and latch check all rods and clips for damage or missing repair or replace as necessary u can manually unlock the door at latch if something was jammed or stuck in latch

Nov 26, 2009 | 2007 Dodge Caravan SXT Minivan New Cars

2 Answers

My 1999 Chevy Silverado 3 door 4x4 power door locks wont unlock the door completely. The switch activates the door lock slide, but only part way. Any recomedations?


check for binding by interior door slide if looks good remove trim ring around interior handle and on plastic lock slide use a dry lube or graphite if still not releasing remove panel --2 screws in arm rest/door grab than carefully pull straight back starting at bottom corner might need a screw driver to release the plastic clips on panel if u have help once panel is off they can hold panel away or you can push out switch panel and remove door panel out of the way check the lock rod plastic clips for damage and or binding repair or replace problem replace panel -good luck

Nov 24, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

How do you remove the inside paneling to fix a broken door handle?


4-Cylinder Engines
  1. Remove the screw in the door handle trim, slide the handle assembly forward, and out to access the lock rod clip. Release the clip, disconnect the door lock switch and remove the door opener handle assembly.
  2. Carefully pry off the cap(s) in the armrest pocket, then remove the screw(s).
  3. Carefully pry off the cap under the armrest and remove the screw.
  4. Using a suitable trim panel removal tool, unsnap the door panel from the door frame.
  5. Unplug the electrical connectors for the power windows, power mirror and courtesy light.
  6. Carefully lift the door panel up and away from the door frame.
  7. Installation is the reverse of the removal procedure.

V6 Engine
  1. Remove the screw in the door handle trim, slide the handle assembly forward, and out to access the lock rod clip. Release the clip, disconnect the door lock switch and remove the door opener handle assembly.
  2. Carefully unsnap the rear of the speaker grill, lift and pull back to release it and remove the grille.
  3. Remove the panel mounting screws located around the perimeter of the speaker.
  4. Remove the cap and screw in the pull pocket of the armrest.
  5. Slide the pocket back slightly to release the front hook, then lift up, detach the electrical connectors and remove the pocket assembly.
  6. Using a suitable trim panel removal tool, unsnap the door panel from the door frame.
  7. Carefully lift the door panel up and away from the door frame slightly and disconnect the speaker connector.
  8. Installation is the reverse of the removal procedure.

Oct 13, 2009 | 1999 Honda Odyssey

1 Answer

Sliding door does not lock with button on front doors or keys


Your question is alittle vague,...so Ill do my best...If your van has central locking (all the doors lock when you lock the drivers door with a key) then I can easily say that the actuator for the sliding door lock has malfunctioned....However if you are implying that you cant lock the sliding door from the outside using a key then it is because the linkage inside the door has came apart (Both issues would cause the door not to lock with the power lock button) If it is the linkage this is easily fixed by removing the interior panel on the slider and reconnecting the metal rod to its rightful place, if it is the actuator you have to replace it by removing the interior panel..Good luck

Oct 08, 2009 | 2006 Chrysler Town & Country

1 Answer

Broken door handle - 2001 Nissan Quest SE


first you van order parts at discount from tascafordparts.com.
quest & mecrury villager are the same vehicle made at the same assembly plant. good luck to all. If you were in detroit area, I wold help you.

Trim Panel —Sliding Door Removal
  1. Remove the sliding door trim panel finish panel.
532ac84.gif 2. Remove the sliding door trim panel 2965fbe.gif Latch Remote Control —Sliding Door Removal
  1. Remove the rear sliding door trim panel. For additional information, refer to Section 501-05 .
  1. Position the watershield aside.
  1. If equipped, disconnect the sliding door power door lock actuator electrical connector.
f373e91.gif
  1. NOTE: Mark the position of the sliding door rear latch cable adjusting bracket before removing the bolt.
  2. Disconnect the sliding door rear latch cable.
  3. Remove the bolt.
  4. Remove the sliding door rear latch cable adjusting bracket from the latch remote control.
  5. Disconnect the sliding door rear latch cable from the latch remote control.
b8f2f32.gif
  1. Remove the 4 sliding door front latch bolts.
NOTE: If necessary, transfer parts to the new sliding door latch remote control.
Remove the sliding door latch remote control.
  1. Remove the bolts.
  1. Remove the sliding door latch remote control.
cb5ee71.gif
Handle —Exterior, Sliding Door Removal
  1. Remove the sliding door latch remote control. For additional information, refer to Latch Remote Control—Sliding Door .
  1. Remove the sliding door exterior handle.
    1. Remove the nuts.
    1. Remove the sliding door exterior handle.
0c820f3.gif

Mar 08, 2009 | 2001 Nissan Quest

2 Answers

Broken exterior door handle,passenger sider ,sliding


Got this idea from mpvclub.com: Get some stainless or aluminum sheet metal screws, drill pilot hole into the handle and into the receiving part behind, then screw in the screw. Do on both sides of handle (get appropriate length screw.) When done, get some putty or hardener to fill in the screw slot, let dry, then sand smooth, then paint with body color. Result is great and inexpensive.

Jan 26, 2009 | 2004 Mazda MPV

Not finding what you are looking for?
2011 Ford Transit Connect Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...