Question about 2001 Ford Windstar

1 Answer

Where is the E G R differtail ciciruit located @ on ford windstar 01 engine size 3.8

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,036 Answers

The DPFE sensor located next to the egr valve follow egr valve vacuum hose it will lead you to the DPFE sensor.

Posted on Apr 25, 2013

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 38 Answers

SOURCE: fue pump location 2001 ford windstar

Probaly in the fuel tank

Posted on Jul 19, 2009

  • 1335 Answers

SOURCE: What size engine is in a 2001 Ford Windstar

2001 Ford Windstar Base Passenger Minivan Performance & Efficiency Standard Features - 3,797 cc 3.8 liters 6 V engine with 96.8 mm bore, 86 mm stroke, 9.4 compression ratio, overhead valve and two valves per cylinder - Unleaded fuel - Fuel economy EPA highway (l/100km): 10.2 - Multi-point injection fuel system - Main 98 liter unleaded fuel tank - Power: SAE and 149 kW , 200 HP @ 4,900 rpm; 240 ft lb , 326 Nm @ 3,600 rpm

Read more: http://www.motortrend.com/cars/2001/ford/windstar/base_passenger_minivan/334/specifications/index.html#ixzz0lCKE3HOu

Posted on Apr 15, 2010

Dan The Tech
  • 47 Answers

SOURCE: will an engine from a 1998 ford windstar fit into

The engines are identical if the 8th character in each vehicle's VIN are the same.

Posted on Jun 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the starter located on a 01 ford windstar? And is it a fairly simple to do yourself?


It should be on the passenger side down low where transmission mates to the engine (bell housing).

May 20, 2017 | Ford Cars & Trucks

1 Answer

Location of temp sensor 1998 ford windstar


You didn't list liter size of engine? I looked at info for the 3.8L engine.
26291369-ji5oe1razwiyvq5lb5xvnian-5-0.jpg

Sep 25, 2016 | 1998 Ford Windstar

1 Answer

What is the mhf sensor located on a 1999 ford windstar


Never heard of a MHF sensor. There is an MAF sensor, (Mass Air Flow) located inside the air body where the air filter housing is though. Check your data and repost with engine size if that is not the answer you seek. Also a trouble code would be helpful to determine what the problem may be.

Jul 20, 2014 | 1999 Ford Windstar

1 Answer

Windstar engine lock up


01 ford/ 3.8 engine locked up wont trun over at all

Jan 13, 2012 | 2001 Ford Windstar

1 Answer

If it rains my 01 ford windstar will not want to run. It will back fire and miss. When dry for few days it will run better engine light is on but if you clear the codes it will run like nothing is wrong....


Windstars are known for lean codes caused by upper intake plenum gaskets. Also, there is a small tube going into the air intake hose that will pull out if you tried to install an air filter. It goes into the air intake hose between the air filter box and the throttle body on the firewall side of the hose. Check it. As far as the EGR concern you would need to provide the exact code. The lean codes won't cause what you're describing. The symptom you're describing sounds more like a misfire. Windstars are known for ignition coils going bad due to hairline cracks allowing moisture in and causing the misfire. The coil is located behind the intake plenum. Also, windstars are known for fouling #'s 1,2 and 3 plugs with oil. Good luck. Be sure to have your rear axle and front subframe checked for cracks at a ford dealer. There's a safety recall on them and if it's too bad, Ford will purchase the vehicle for 1.5 times the book value if it's unsafe.

Apr 03, 2011 | 2001 Ford Windstar

1 Answer

O2 sensors on 1998 ford windstar


1998 Ford Truck Windstar 3.8L SFI 6cyl, there are 4 oxygen sensors on the Windstars They are divided into 2 banks of 2. Bank 1 is the for the rear 3 cylinders of the engine - Bank 2 is for the front 3 cylinders. Bank 1 / Sensor 1 (upstream) is located just below, in the pipe, the exhaust manifold on the back of the engine.

REMOVE TIP: you may have to bend part of the transmission heat shield out of the way - be sure to put it back when done.
Bank 1 Sensor 2 (downstream) is located just past the drivers side catalytic converter.
Bank 2 Sensor 1 (upstream) is located just below the exhaust manifold, in the pipe, at the front of the van - access is from the top.
Bank 2 Sensor 2 (downstream) sensor is located just past the passenger side catalytic converter.

NOTES: * Use lots of penetrating oil - allow to soak - to make removal easier and avoid damaging the exhaust pipe

Hope this help; TY for using Fixya (remember rated and comment this).

Mar 30, 2010 | 1998 Ford Windstar

1 Answer

I have an 01 windstar with misfire on cyl 3 and 4


check your coil I have seen alot of the fords with the ohv 3.0 engines that the coils will have cracks in the plastic and jump fire ground out etc. if thats not it take some carb cleaner and spary around your intake and listen for changes in the running for a vacum leak. hope this helps.

Mar 11, 2010 | 2001 Ford Windstar

2 Answers

O2 sensor location


DTC P0156 indicates the output voltage of the downstream Heated Oxygen Sensor (HO2S) is less than some calibratable functional window. The possible causes are:
  1. Pinched, shorted and/or corroded wiring and pins.
  2. Crossed sensor wires
  3. Exhaust leaks.
  4. Contaminated HO2S.
  5. Bad HO2S.
Since you didnt specify the engine size in your vehicle - please see the diagram below for the location of the sensor(s)

84f80ca.gif
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Apr 16, 2009 | 1998 Ford Windstar

2 Answers

Where is the speed sensor located?


There are three transmissions available in different year Windstars.95-00 had an AX4S model,depending on engine,or possibly an AX4N model.From 01-03,the 4F50N,just a later version of the AX4N was introduced.There are many variations of speed sensors depending on the year model,and engine size,and trans that was equipped at the factory.They are all located on the transaxle.The AX4S has two speed sensors,one located above the final drive assembly,mounted atop the transaxle case,in between the back side of the engine block,and the firewall of the car body.Later versions of the AX4S also carried another speed sensor in the same area,but back closer to the bellhousing,and deleted the one i just described a few sentences back.,Both versions of the AX4S carry a second speed sensor in the channel plate,mounted externally,on the driver side,near the sidecover/pan.Now onto the AX4N trans.This trans also carries a speed sensor in the channel plate,and a second one locatated atop the trans case,behind the rear of the engine block,in between the engine and firewall.The 4F50N also uses the same speed sensor arrangement as the AX4N model.Good luck.

Jul 23, 2008 | 2001 Ford Windstar

Not finding what you are looking for?
2001 Ford Windstar Logo

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...