Question about 2008 Chevrolet Trailblazer

Open Question

Where do i find the traction/stability selector button

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to turn off traction control on 2005 Chevrolet Trailblazer


Alexandre, check in your owners manual for small off button on the shifter under the large engage button. If you do not want traction control on in your vehicle check your manual for traction control fuse location and remove fuse. I can not say this is a wise thing to do, because your traction control is a safety feature for your vehicle. ABS braking system will be lost if you pull the fuse also. Pulling the fuse will disable abs, traction and stability control. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To COMPLETELY Disable Traction Stabilitrack Control on GM Chevy
Turn Off Traction Control And Stabilitrak 1999 2006 2007 2013 Chevrolet...
Traction Control Button

Jul 19, 2016 | 2005 Chevrolet TrailBlazer

1 Answer

ERROR CODES B0770, B0780, B0785, B0790, B2725, C0321 AFTER REPLACING TRANSFER CASE MOTOR, 4WHEEL DRIVE ACTUATOR AND 4WHEEL DRIVE SELECTOR SWITCH. SERVICE 4X4 LIGHT IS STILL ON ANY SUGGESTIONS OR FIXES


Not sure about some of the codes you have but looks like you may have traction control / stability control issues. The C code is a chassis code and they are really unusual. You may want to have those codes done again because my machine does not list body codes for some of those numbers. P codes yes, B codes no. But just a comment. If you ran this vehicle with all the wheels off the ground (on a lift) you will get every kind of weird code and light you can imagine. The traction control and stability control computers are very sensitive to issues that don't make sense to them. Running with all four wheels off the ground makes them really confused.

Jan 17, 2015 | 2008 GMC Envoy Denali

1 Answer

Warning light on dash board, skid back wheels


his means your traction control is switched off. Somewhere on the dash or near the gear selector is a button with a similar symbol that has probably been pressed by accident. Press the button to turn traction control back on

Jul 19, 2011 | Lexus IS 250 C Cars & Trucks

1 Answer

BMW 525i At the emissions test, the technician said some kind of traction control is on (for better grip on snowy roads?), and we couldn't figure out how to turn it off.


You did not mention the year. Is there not a button on your console or lower dash that is marked ASC (automatic stability control) or DSC (Dynamic Stability Control) or DTC (dynamic traction control)? A light should illuminate in your dash cluster when you press the button and ASC or DSC is turned off. DTC lights a light when you turn it on, which you do only in deep snow.

Apr 07, 2011 | BMW 525 Cars & Trucks

2 Answers

What is traction stability control light for?


It has 2 functions.

1. to let you know that your Traction and Stability Control System is active. This means that your tires are slipping or your car is leaning and the ststem is actively taking corrective action. This should only cause the light to come on for a few seconds at a time.

2. To let you know that the Traction and Stability Control System is disabled. It may be because the button has been pushed to turn it off or it may be due to a malfunction in the system. Thjis will cause the light to come on and stay on. If it is staying on and it is not because you have turned it off, then the system will have to be diagnosed to find out what the malfunction is that has caused it.

Jan 16, 2011 | Mitsubishi 3000GT Cars & Trucks

1 Answer

What is the esp button for?


The ESP button is the Stability and traction control button. It will increase the traction in your brakes if you stop on ice.

Hope this helps (remember to rate this answer).

Dec 13, 2010 | Chrysler Town and Country Cars & Trucks

2 Answers

Traction control won't disengage.


You can pull the fuse for now. The traction control pump could be faulty or the wheel sensors are dirty and need to be cleaned with brake parts cleaner

Jan 18, 2010 | 2006 Cadillac STS

2 Answers

Stability System Reset Button on a 2003 Cadilac CTS


YOU HAVE TO HOLD THE TRACTION CONTROL BUTTON IN THE GLOVE BOX DOWN FOR 7SEC. YOU'LL THEN SEE A MESSAGE SAYING THE STABILITY SYSTEM IS OFF. IF YOU ACCIDENTALLY LET GO BEFORE IT SAYS IT'S OFF, YOU HAVE TO PUSH THE BUTTON AGAIN, AND START OVER.

Jan 17, 2009 | 2003 Cadillac CTS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...