Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
from experience the system is to lean not getting enough gas which causes lost of power pinging rough idoling and it clogs your fuel injectors which will cause failed smog test good luck
Posted on Jul 07, 2009
I had the problem where the wires were damaged by road debris. The wires cross under the radiator, exposed, on the cross frame rail-driver's side. I put some shrink tubing over the wire, soldered them back together, slipped the shrink tubing over the repair and heated them up to seal nicely. Black tape over the repair. I thought i had a one in a million problem ;-).
Of course I bought a new sensor too...Doh. well I have a spare now.
Posted on Sep 17, 2010
SOURCE: sensor keep coming in for
DTC P0128: Engine Coolant Temperature (ECT) Below Thermostat Regulating Temperature
Do you have any issues with heat in the vehicle? If so the thermostat may need replaced If not the engine coolant temperature sensor is most likely reading incorrectly due to a bad sensor or connection to the sensor.
Posted on Dec 01, 2010
SOURCE: what is fault code 71 means
Code 71 is because your mixture is slightly rich also. the coolant temp sensor and is sometimes the culprit but i think there may be issues with the afm and possibly the iac (on the 22re) also bad grounds can cause faulty codes. my 22ee has had the same code and ive replaced everything except the throttle body , every sensor including the afm and the egr valve. i have no vacuum leaks and good grounds. i got the code to clear for about 3 weeks last spring but it came back, what helped was i added a few ground straps and cleaned all the contacts at the ground terminals. still came back. i do have a header , no cat and a bigger exhaust but it was on prior to all the exhaust mods. the code is actually related to the temp of the exhaust gas. so i would think maybe the o2 sensor would be the sensor detecting the error. that and the egr temp sensor, which i have also replaced but wth a used part. maybe thats the problem. its a real pain in the *** man... trust me i was about to just pull the cel bulb out of the cluster and say screw it.
Posted on Apr 05, 2012
Tips for a great answer:
Apr 29, 2017 | Cars & Trucks
Mar 24, 2016 | Cars & Trucks
Aug 13, 2015 | Cars & Trucks
Mar 11, 2015 | 2011 Chevrolet Equinox
Apr 23, 2012 | 2008 Dodge Avenger
Mar 03, 2010 | 2000 Chevrolet Blazer
Mar 27, 2009 | 2004 Buick LeSabre
33 people viewed this question
Usually answered in minutes!