Question about Cars & Trucks

Open Question

AG autoguard professional series car alarm/immobiliser

Bought a car second hand don't know the coad or how to use this device

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
apollo 13
  • 56 Answers

SOURCE: engine alarm immobilisers

is that factory alarm,you can try to lock and unlock the driver side door.if not usually they put areset button under the driver kick panel,or u can bypass it by tapping the yellow wire on the ignition swicth,wiring side,

Posted on May 28, 2008

Ad
  • 102 Answers

SOURCE: volvo 850 t5r alarm on all the time so car is immobilised

lock and unlock with all keys at drivers door

Posted on Aug 26, 2008

  • 6 Answers

SOURCE: car alarm wont let me start the car it wont stop going off

try unhooking the battery while the battery is disconnected turn the ignition on leave the ignition on while you reconnect the battery this should override the alarm

Posted on Feb 14, 2009

  • 60 Answers

SOURCE: 1998 z3 alarm & immobiliser info

Ypu need reprogramming.

Posted on Aug 09, 2009

  • 15 Answers

SOURCE: i have a 98 nissan primera sri with the factory

your nissan primera nats alarm is connected to the factory fitted stereo. check your stereo fuse as these are the symtoms i have done this before

Posted on Nov 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote for appollo 1996 fell apart need to know how to reassemble


Replace it, they don't provide repair instructions for this type of device.

Nov 05, 2012 | Cars & Trucks

1 Answer

How can I disarm the Alarm. I bought my 97 Cabrio used (it didn't come with the remote) The Door locks also don't work. I can't drive it because when I turn the key the alarm goes off and it...


If you don't have the remote then its pretty much useless. I have seen at Pep Boys where they sell replacements for the factory/dealer installed alarms. Or just remove the alarm completely and reconnect everything the way it was.
Without knowing what brand alarm it is a person cannot honestly answer how to disarm it as they all work differently.
If you know a brand and model you may be able to find downloadable instruction on the manufactures web site.

Sep 08, 2011 | 1997 Volkswagen Cabrio

1 Answer

My 2006 325I door wont lock, Is this a fuse problem, alarm immobiliser issue or a n door actuator issue. Thanks, John


In a 2006, most likely a fuse. I saw one with a failed fuse just a week ago.
If it turns out to be the actuator, they are not difficult to replace, though it takes some time to remove and carefully replace the door panel. Disconnect the battery several minutes before unplugging the air bag if you want to pull the door panel completely out of your way, and DON'T connect the battery and check to see if the new one works while the air bag is unplugged.

Jul 19, 2011 | 2006 BMW 3 Series

1 Answer

Vw passat alarm does not sound but lights still flash! Also a clicking sound can be heard when car locked,is this related to the same problem?


my 98 passat estate has a fob with the drivers key which activates the alarm in the boot,bit like an immobiliser, just put it in the hole located near or on the alarm,should hear it beep.don't know if its a factory fit alarm.hope this was helpful.

May 19, 2011 | 2001 Volkswagen Passat

1 Answer

I recently bought a second hand vw golf mk4 2004 model, it came with a series of problems, such as the car was over heating as the fans are not switching on, the remote for the alarm doesn't work and the...


As far as the overheating problem, check the fan relay switch.The alarm should be as easy as changing the remote battery. For the radio try replacing the fuse, this should get you going.

Mar 31, 2011 | 2002 Volkswagen Golf

1 Answer

I have a 98 nissan primera sri with the factory fitted nats alarm/immobiliser.the mil light is flashing on the instrument panel and the alarm indication light is on when i turn on the ignition.the engine...


your nissan primera nats alarm is connected to the factory fitted stereo. check your stereo fuse as these are the symtoms i have done this before

Sep 17, 2009 | 1998 Nissan 200SX

1 Answer

1998 z3 alarm & immobiliser info


Ypu need reprogramming.

Aug 08, 2009 | 1999 BMW Z3

1 Answer

Toyota Celica '91 ST184R - Key fob remote does not unlock the car


The ST18x didn't come with a factory fitted alarm, so this is going to be more general.

Your alarm will have a manual disarm somewhere. If you have a small cylindrical device with your keyfob, there will be a receptacle somewhere near the drivers seat. You need to open the door and press the two items together. If not, you may have a button hidden somewhere around the place. In this case the procedure is usually to hold the button while you insert the ignition key and turn it to the ON position.

Some alarms have a small round key. If your alarm has one, or if your keys came with one and you didn't know what it was for, you can open the bonnet, pop a little cover on the alarm box (it will be bolted to the firewall, usually on the right hand side as you look at it) and turn it off until you can get it repaired, or get a new one fitted.

If none of this works and your alarm is an alarm only and not an immobiliser, you can simply open the bonnet and cut all the wires going into the alarm. If it is also an immobiliser, don't touch anything unless you're handy with a soldering iron and multimeter and have a few hours spare. (You would need to pull the cover down from under the steering wheel, then start taking electrical tape off the big block connector with thick wires, and then start rebuilding the wiring that's been chopped to make way for the immobiliser system on a colour-matching basis.)

May 17, 2009 | 1991 Toyota Celica

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...