Question about 1985 Plymouth Gran Fury

Open Question

Serpentine Belt Diagram

It has 4 belts how do they go on

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
abauto
  • 353 Answers

SOURCE: I need a serpentine belt routing diagram for a

Here is a diagram

c99145a.jpg

Posted on Sep 11, 2009

Ad
bschilz
  • 2049 Answers

SOURCE: Need a diagram for a 1992 Plymouth Grand Voyager

Here's a link to both size motor diagrams...

V6 3.0L
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S4001

V6 3.3L
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7006

If this helps, please post feedback. Thanks

Posted on Sep 21, 2009

bschilz
  • 2049 Answers

SOURCE: Needed serpentine belt diagram for a 91 ply. voyager 3.3L engine

Here's a link to the diagram you need...

http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7006

Good luck and please rate this solution. Thanks.

Posted on Oct 17, 2009

Testimonial: "Looks good."

SOURCE: Serpentine diagram for a 1997 Plymouth Voyager

Make a drawing of where the belt and pulleys are before you remove the belt. You won't need a diagram,you will have made your own and be done before you ever find one,unless you have a shop manual already.

Posted on Feb 08, 2010

ZJLimited
  • 17970 Answers

SOURCE: i need a diagram for a serpentine belt

1994 PLYMOUTH VOYAGER - V6 3.3L 201ci CNG FI N J
and
1994 PLYMOUTH VOYAGER - V6 3.3L 201ci GAS FI N R

Multiple Accessory, w/o A.C.

9c2c906.jpg


Multiple Accessory, w/A.C.

7d40d1b.jpg


Hope this helped.

Posted on Feb 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Serpentine belt diagram 2002 Ford escort zx2


The picture is for a zetec. Let me know if wrong diagram?
26017169-0d1su300qx55v1h5u01lpo5r-3-0.jpg

Dec 21, 2015 | Ford Cars & Trucks

2 Answers

I just needa serpentine belt diagram for a 2006 subaru tribeca


Diagram reference number 1 in the image below:
7540040.gif"" Fitment: 2006 SUBARU B9 TRIBECA - 4 door

Application Notes:

Category: Electrical. Charging and Starting

SubCategory: Alternator / Generator and Related Components

Position: General

Part Number: 809221090


This is a Serpentine Belt that fits the 2006 SUBARU B9 TRIBECA - 4 door with the EZ30D engine. The Serpentine Belt is designed by SUBARU to be part of the Electrical. Charging and Starting-Alternator / Generator and Related Components. The Serpentine Belt has a position on the vehicle of General. The 2006 SUBARU B9 TRIBECA Serpentine Belt is a factory made SUBARU OEM part and it comes with a 12 month 12.000 mile warranty (parts only). Do not be fooled by an aftermarket SUBARU B9 TRIBECA Serpentine Belt! Buy a factory SUBARU part and receive peace of mind!
This factory part has a part number of 809221090. " clear1x1.gif dbox_border_left_bottom.gif clear1x1.gif dbox_border_right_bottom.gif clear1x1.gif

2_12_2013_10_59_21_pm.gif

Dec 14, 2012 | 2006 Subaru B9 Tribeca

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    2 Answers

    Change serpentine belt on 06 sienna


    1. 1 Check to ensure the Sienna's engine is cold, then make sure the Sienna is in park, the ignition is in the off position and the key is removed from the ignition to prevent any possibility of the engine engaging during the serpentine belt replacement.
    2. 2 Open the hood and locate the serpentine belt routing diagram sticker on the side of the engine casing. Study it for a moment before removing the existing belt. It is essential the new belt be installed exactly as the diagram indicates.
    3. 3 Find the tensioner pulley, the main pulley that controls the serpentine belt, and fit a 1/2-inch socket wrench over the self-tensioner on the outside of the pulley.
    4. 4 Pull the wrench to the left to move the pulley forward, which loosens the belt, then remove the belt.
    5. 5 Compare the old serpentine belt with the new, replacement belt for length, width and number of grooves on the belt's underside. Be certain the replacement belt is the right part.
    6. 6 Fit the new belt on to each pulley according to the serpentine belt routing diagram on the manufacturer's sticker, or according to the drawing made prior to removing the old belt. Fit the new belt on to the tensioner pulley last, again applying pressure on the pulley's self-tensioner with the half-inch socket wrench to loosen the pulley.
    7. 7 Release the pressure on the self tensioner and allow the tensioner pulley to ease back into place, thereby tightening the new serpentine belt with the appropriate tension.
    8. 8 Remove the wrench and close the hood.
    Thank you and good luck,
    Lee

    Aug 26, 2010 | 2006 Toyota Sienna

    1 Answer

    Need diagram for serpentine belt in Saab 2001 9-3


    If you have a 4 cylinder check out this sight for a diagram of serpentine belt http://www.thesaabsite.com/93/93pulleys.htm#BELT+%26+PULLEY+SETUP+%28NOT+SPORT+SEDAN%29

    May 22, 2010 | 2003 Saab 9-3

    2 Answers

    Diagram needed


    HELLO THERE: Here is a link that will help you out ok dont forget to rate this soultion this helps me out too 1994 buick lesabre serpentine belt removal 1994 buick lesabre serpentine belt removal. Custom made wrestling belts ... money belt zipper. chest injuries from seat belts. serpentine belt diagram 30 mitsubishi ...beltpedia.info/1994-buick-lesabre-serpentine-belt-removal.html

    Aug 15, 2009 | 1994 Buick LeSabre

    3 Answers

    Need diagram for routing of the serpentine belt on 98 ZX2 Yes having problem threading the belt correctly needa an detailed diagram kind regards


    Go on the Dayco belts web site. They make serpentine belts and a pretty good data base of belt diagrams for any vehicle they make a belt for.

    Feb 02, 2009 | 1998 Ford Escort

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    65 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Plymouth Experts

    yadayada
    yadayada

    Level 3 Expert

    76630 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8499 Answers

    Are you a Plymouth Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...