Question about Cars & Trucks

Open Question

Torque setting intake manifold 2005 chevrolet avalanche 5.3

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


SOURCE: Torque and sequence to Intake Manifold for 3.3L Nissan Xterra 2000

Hi El Faraon,
I believe that you're dealing with 12 mm bolts and nuts....THESE ARE NOT THE SPECS FOR YOUR ENGINE, but I believe that if you use them you'll be close....Tighten in three stages up to 22nm....choose the bolts from the centre of the manifold and circle outwards until you reach the last one.....It may be a good idea to draw an overhead or plan view of the unit, marking out the bolt positions.....Start at the centre and mark the sequence and follow that....What is important is starting at the centre, so that nothing becomes warped....

Hope this helps,

Regards, Johngee10

Posted on Sep 06, 2008

  • 1201 Answers

SOURCE: Torque Settings for 3.4L DOHC Intake Manifold and Plenum

10 ft lbs.

Posted on Mar 16, 2009

  • 783 Answers

SOURCE: Ford 460 Intake Manifold Torque spec

22 to 35 ft lbs

Posted on May 22, 2009

  • 466 Answers

SOURCE: need head bolt, intake manifold, and exhaust torque specs

Cylinder Head Bolt Step1- (25 FT.Lbs) Step2(45 Ft.Lbs) Step3(65Ft,Lbs).....Intake Manifold(35Ft Lbs)....Exhaust Manifold Center (20Ft Lbs) All Others (20 Ftlbs).....Thanks

Posted on Mar 06, 2010

  • 202 Answers


the torque specs for your sequoia intake manifold is 13 ft.lbs.

Posted on Apr 12, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Need all the bolt torque specs for 2005 equanox 4300 from intake on up

Feb 01, 2018 | 2005 Chevrolet Equinox


Chevrolet 4.3L intake manifold installation assist

When installing an new intake manifold gasket it is necessary to carefully align the manifold while setting it. This is due to the fact that silicone is used on each end and it is important to not move the manifold when setting it. To assist in a perfect setting, go to a hardware store and purchase a couple or more bolts of the same thread pitch as the manifold bolts. Cut the hex heads off the bolts and hand screw the headless bolts into several places in the block. Make sure the bolts are long enough to be useful and easily removed when the manifold is set. Set the manifold straight down. Set a few factory bolts and then remove the threaded pins used to align. Best to use new factory bolts when replacing a manifold. Finish by setting all bolts and torquing in correct pattern to correct torque.

on Feb 27, 2010 | Chevrolet S 10 Cars & Trucks

1 Answer

What do the intake manifold bolts for a 2002 Chevy Malibu with a 3.1L need to be torqued to?

Pretend the picture is lower intake manifold, that is the tightening sequence.
1st step 5 ft lbs
2nd step bolts 1--4 9.6 ft lbs
3rd step bolts 5--8 18 ft lbs
The upper intake manifold use about the same sequence tighten to 18 ft lbs.
If you don't like ft lbs use inch lbs.
If the upper intake manifold is plastic, be careful with that.
intake manifold-glquxvjrls3o0ta25lrevmb0-4-0.jpg

Apr 17, 2017 | Chevrolet Malibu Cars & Trucks

1 Answer

Intake manifold torque specs

Intake is about 42 foot pounds. Upper intake is 12 foot pounds. Start in the center and work back and forth to the outer bolts. Snug them first (around 25) then set them at 42. Upper also start at center but torque them down.

Aug 29, 2015 | 2005 Mazda 6

1 Answer

Intake torque on top & bottom bolts

Apply sealer to the lower intake manifold bolts prior to installation. On the 5.0L and 5.7L engines, install the bolts and torque in sequence as follows:
Step 1: 71 inch lbs. (8 Nm).
Step 2: 106 inch lbs. (12 Nm).
Step 3: 11 ft. lbs. (15 Nm).


Fig. Lower intake manifold bolt tightening sequence-5.0L and 5.7L engines / zoom image link here

Upper intake manifold mounting bolts/studs, torque in a crisscross pattern as follows:
  1. Step 1: Torque the bolts/studs to 44 inch lbs. (5 Nm).
  2. Step 2: Torque the bolts/studs to 83 inch lbs. (10 Nm).

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day and Merry X-mas.

Dec 23, 2011 | 1999 Chevrolet Tahoe

1 Answer

2000 chevy v-6 4.3 torque sequence and settings for intake manifold

lower intake manifold

step 1 27 inch lbs.

step 2 106 inch lbs.

step 3 134 inch lbs.

upper intake manifold

step 1 44 inch lbs.

step 2 80 inch lbs.

Jun 01, 2011 | 2000 Chevrolet Blazer

2 Answers

02 Chevy avalanche 1500 need to know torque specs for intake manifold and if theres an tightening sequencing

the torque specs for your intake are the first pass to 44in/lb the second pass to 89in/lb. and the tightening sequence is as follows:
start on the passenger side (right side) the 3rd bolt (from front) is #1 then on the driver side (left side) 3rd bolt is #2 and 4th bolt is #3.Back to right side 2nd bolt is #4 and 4th bolt is #5. Left side 2nd bolt is #6 and 1st bolt is #7. Right side 5th bolt or rear most bolt is #8, left side rear bolt is #9. Then finish with right side 1st bolt is # 10.

Do that the first time at 44 in/lb then same thing over again at 89 in/lb

Nov 27, 2010 | Chevrolet 1500 Cars & Trucks

1 Answer

Where is the thermostat on a 2005 5.3 ltr. avalanche

Follow the top hose from the radiator to its end. There should be two bolts holding down the thermostat housing at that point on the intake manifold.

Nov 21, 2010 | 1999 Chevrolet K1500

1 Answer

I have check engine light on my 2002 chevy avalanche and the code reads P0327 please help

That code is for your knock sensor which is located under your intake manifold. There are two under the intake. I would recommend replacing both, they are 40 dollars a piece usually plus the labor to remove the intake.

Apr 07, 2010 | 2002 Chevrolet Avalanche

2 Answers

2005 Dodge 1500 code p0404 EGR valve.

The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head ,

  1. Remove electrical connector (5) at top of EGR valve solenoid.
  2. Remove tube mounting bolt (1) at intake manifold.
  1. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
  2. Remove gasket located between EGR tube flange and EGR valve assembly.
  3. Remove two EGR valve mounting bolts (5).
  4. Separate valve assembly (3) from engine.
  5. Remove and discard metal gasket located between cylinder head and valve assembly.
  1. Clean area at rear of left cylinder head where it joins base of EGR valve.
  2. Clean EGR tube where it joins EGR valve.
  3. Position new gasket between EGR valve and cylinder head.
  4. Position EGR valve to cylinder head. Install and tighten two bolts (5). Refer to Torque Specifications.
  5. Position new gasket between EGR tube flange and EGR valve assembly.
  6. Position EGR tube (1) to side of EGR valve and into intake manifold.
    1. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
    2. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications

Feb 05, 2009 | 2005 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

79024 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

13652 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides