Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: engine codes p0642 and p0451
P0451 Evaporative Emission Control System Pressure Sensor Range/Performance
P0642 Engine Control Module (ECM) Knock Control -Defective
i think the most likely cause is the anti knock sensor ,this is mainly fitted to american models rather than europeon models owing to the europeon parliament disallowing the high level of biological produced fuel used in america,the answer o this i think is to see the post i have added to this questions answer.
Posted on Nov 21, 2012
Tips for a great answer:
Nov 29, 2016 | Dodge Cars & Trucks
Limited throttle mode--The ECM will continue to use the accelerator pedal for throttle control, however, the maximum throttle opening is limited.
Throttle default mode--The ECM will turn OFF the throttle actuator motor and the throttle will return to the spring loaded default position.
Forced idle mode--The ECM will perform the following actions:
Limit engine speed to idle by positioning the throttle position, or by controlling the fuel and spark if the throttle is turned OFF
Ignore the accelerator pedal input
Engine shutdown mode--The ECM will disable fuel and de-energize the throttle actuator.
Did you have it checked for DTC's - diagnostic trouble code's related to the reduced engine power ?
All so has APP sensor gas pedal !
Accelerator Pedal Position (APP) Sensor
The accelerator pedal contains 2 individual accelerator pedal position (APP) sensors within the assembly. The APP sensors 1 and 2 are potentiometer type sensors each with 3 circuits:
A 5-volt reference circuit
A low reference circuit
A signal circuit
The APP sensors are used to determine the pedal angle. The engine control module (ECM) provides each APP sensor a 5-volt reference circuit and a low reference circuit. The APP sensors provide the ECM with signal voltage proportional to the pedal movement. The APP sensor 1 signal voltage at rest position is less than 1 volt and increases to more than 4 volts as the pedal is actuated. The APP sensor 2 signal voltage at rest position is less than 0.6 volt and increases to more than 2 volts as the pedal is actuated.
Your best bet is take your vehicle to the dealer !
May 03, 2016 | Cars & Trucks
Apr 29, 2014 | 2003 Toyota RAV4
Apr 21, 2014 | Volkswagen Cabrio Cars & Trucks
Oct 09, 2013 | Honda Accord Cars & Trucks
Jul 23, 2013 | Cars & Trucks
Dec 13, 2012 | 2004 Dodge Ram 1500
Nov 20, 2012 | Cars & Trucks
Jun 28, 2011 | 1997 Honda Odyssey
Sep 13, 2009 | 2006 Ford Crown Victoria
85 people viewed this question
Usually answered in minutes!