- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Wow! You've really got your hands full! 1) Verify the fuel pump is installed correctly and has power. 2) Verify the fuel filter is installed correctly. 3) Verify the spark plug wires are correctly installed. The number one reason for a car not running after an owner changes the spark plug wires - the wires were not installed to the correct cylinder.
for the most part they are in between the fuel injector the best thing for you to do is stop by your local GM dealership in the part department and they be able to print you off the pictures and diagrams you need if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car Merry Christmas and Happy New Year as always wish you the best of luck Michigan Man.
To change a spark plug. 1.Disconnect the wire attached to the spark plug it would be wise to do only one at a time! 2.Take a long socket that will fit the spark plug 3.Attach to the socket wrench and turn counter clockwise until off. 4. Put the new spark plug in and hand screw until tight then turn the socket wrench clockwise until completely tight usually 1 1/2 turns. 5.Then reconnect the spark plug wire. Easy as that. Repeat steps 3-5 for the rest and remember ONE PLUG WIRE AT A TIME!
the longest lead goes 2 the furthest cylinder, as they get shorter move back towards the distributor!!! all the leads are different lenghts! check the plug lead on the coil at the shock mount as it gives problems!!
change the spark plugs and then do a compression check on the engine to see if it has good compression and try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
there are 4 large wires at the front of the engine on the cylinder head, carefully remove them by twisting the rubber boots back and forth until they come off, under those are the spark plugs, u will need a 3/8" ratchet and a short socket extension with a 5/8" spark plug socket on it, put the socket over the plugs and remove them reinstall in reverse order, 10 minute job on an escort.