Question about 2012 Mini Cooper Clubman John Cooper Works 2dr Hatchback 1.6L 4-cyl. Turbo 6-speed Manual

Open Question

Bleed clutch on 94 mitsubishi canter 4x4 light truck

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 94 d21 Nissan and it sounds like its going into gear but will not pull at all why


If it is a manual transmission,then it could be your slave cylinder.Check your clutch fluid,if low or out then your slave cylinder is leaking and not holding pressure.I have a 85 Nissan 720 4x4 with the 2.4 engine,replaced mine a few times,you can just add fluid and bleed it to get you home.Here's a link on how to replace,you didn't state if you have the 2.4 or 3.0 engine,here's another link on the part.Autozone sells a one man bleeder kit for about 8 bucks,I have one,the cylinder is located on the side of the transmission,easy to replace. Repair Guides Clutch Clutch Release Cylinder AutoZone com Here's a link on bleeding it. Repair Guides Clutch Bleeding The Clutch Hydraulic System AutoZone com It uses brake fluid,the same that's in your brake reservoir. Duralast Clutch Slave Cylinder 12425 Read Reviews on Duralast 12425 Here's the bleeder kit you will need. OEM One man brake bleeder kit 25036 Read 17 Reviews on OEM 25036

Aug 13, 2017 | Nissan Cars & Trucks

1 Answer

Trying to time a 1988 Mistubishi mini truck.


[PDF]Mitsubishi Canter Truck Engine Diagram - SourceForge

inhub.sourceforge.net/alpha/.../mitsubishi-canter-truck-engine-diagram.p...
mitsubishi canter truck engine diagram mitsubishi canter 4d34 engine manual ...light on dash symbols 95 mitsubishi mini truck repair manual 1988 mitsubishi ...

Timing problem 22r 1987 ' IH8MUD Forum

forum.ih8mud.com > ... > 95-older Toyota Truck Tech
Mar 17, 2009 - I am having trouble timing my 22r, 1987 mini truck. ... adjusting the valves, at TDC, the dot on the timing chain cam gear is not quite all the way ...

Mitsubishi 2.6 liter engine - description and common repairs

www.allpar.com/fix/26.html
I had a 1988 2.6 liter Mitsubishi engine in my Mazda B2600 pickup truck, and ... and I would have been out the $99 for a new timing chain kit (which includes ...

Jan 08, 2016 | Mini Cars & Trucks

1 Answer

How to bleed brakes on a mitsubishi canter with abs on a 2010 plate


Hi I have a 1987 Rosa. Is it normal to pump the brakes one to three times in order to stop

Apr 05, 2013 | Mitsubishi Mighty Max Macrocab Cars &...

1 Answer

94 Chevy 2500 Clutch Engagement?


You probably have a hydraulic clutch. A hydraulic clutch has both a master and a slave cylinder. The slave cylinder engages/disengages the clutch plate. You might be low on clutch fluid in the master cylinder, or the system may need to bled similar to bleeding brakes. Worst case is you need a new clutch, pressure plate, and throwout bearing. They should all be replaced when doing a clutch job.

Aug 23, 2012 | Cars & Trucks

1 Answer

I need help changing out the master cylinder in my '94 toyota 4x4 pickup truck. It is a 5speed, i have already changed out the slave cylinder and installed the master cylinder but i still can not get the...


did you bleed the system?? you must bleed the system from the clutch slave. if this has been done, I need more info!! How does the clutch pedal feel, is the clutch slave engaging at all??

Sep 27, 2010 | 1994 Toyota Pickup

1 Answer

I have a 94 and 93 honda civic and the clutch pedal all the way to the floor and stock..i change the master cylinder ang bleed it still doing same problem what could be any other causing it any help will...


are you sure that no other part is not leaking, , how do you bleed the system , first you fill the clutch resover with fluid . you then open the clutch cylinder bleeding screw . wait a few minst for fluid to run out , then lock it off, have an assistance to pump the clutch and press down and hold it there , then you open the bleeding screw and lock off back before the assistance could relace the clutch peddle , do that a few time till all the air come out let me konw what happen

Aug 02, 2010 | 1996 Mitsubishi Eclipse

2 Answers

Clearance for mitsubishi canter 4m40 engine valve


hello - i cant locate the clutch fluid reserve in my 88 canter truck...

Can you help

Apr 11, 2010 | 1988 Mitsubishi Pickup

Not finding what you are looking for?
2012 Mini Cooper Clubman John Cooper Works 2dr Hatchback 1.6L 4-cyl. Turbo 6-speed Manual Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mini Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

78289 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mini Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...