Question about 2006 Dodge Magnum

1 Answer

What info does the cars computers hold - 2006 Dodge Magnum

Posted by on

  • Marc Podeszek May 11, 2010

    Basically everything



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 359 Answers

Thats a broad subject. Basically, it will hold the mapping for your fuel pressure, air pressure, fuel/air mix. It will monitor, all of your fluid levels (dummy lights), the temperature sensors go through there. Your cars RPM gauge is fed from the motor to the computer, and back. More than likely, with a car as new as yours, they have small sensors to monitor air pressure in the tires, (mine does). Your motors functions, injectors, fuel relays, electrical systems, and O2 sensors. It really varies with all vehicles, but some even monitor emissions, washer fluid level, whether your gas cap is open, all of your safety systems. Your airbags come from the computers signal. Transmission gears, and temp. I am sure there is a whole lot more, but that is a pretty good idea. Hope that helps.

Posted on Mar 13, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Do i have to reset the computer after oil change on my bmw 2006 325i

You don't "have to" reset the status but it does help to keep track of oil life.
Turn the car on. Wait about a minute for the computer to get to normal.
press and hold the travel mile reset button. HOld it untill an ! in a triangle appears. then your maintanance info will pop up. select the item to reset. and tap the side button on the wand atached to the stearing wheel. this button is what you use to browse through your computer. press the button once it will say "reset" press and hold it the second time and it will say reset, hold for 5 seconds or so and it will show a check mark next to
"reset" confirming it has reset.

Dec 08, 2011 | 2003 BMW 325

1 Answer

How do I reset the computer, after an oil change, to reflect that the oil is at 100%?

turn key on, press INFO and RESET. to get to Personalization, hit INFO to scroll to OIL LIFE RESET, then hold the RESET button in until it reads ACKNOWLEDGED

Sep 21, 2011 | 2006 Chevrolet Cobalt

1 Answer

My insturment cluster stopped working all together. no gauges, no milage, nothing works on it. at first I could tap on the dash and it would work for a little while then stop. Now it doesn't work at all....

I believe the computer is keeping that info for you. There is nothing in the cluster to program. Suspect you may just have a loose connector. See if you can reach up there and push on the connector. Have the key on and watch to see if it has any effect. If not, get back to us and maybe we can find a procedure to replace the cluster.

Sep 29, 2010 | 2003 Chevrolet Silverado 1500

1 Answer

After an oil change how do you reset the milage indicator to next oil change?

Turn the engine off with the key in the the accessory position so you can see the info display. Press the info button until the Oil Change info is shown. Hold down the info button and it will ask to 'clear', press the info button again. Done!
Good luck

Dec 09, 2009 | 2009 Mitsubishi Outlander

1 Answer

Reset computer for reading oil life on v6 2001 buick regal

Turn the ignition to ON. Press the GAGE INFO button on the driver information center (DIG) switch to view OIL LIFE INDEX. Press and hold the RESET button on the DIG until the display reads OIL LIFE INDEX 100% NORMAL. The engine oil life monitor is now reset.. Turn the ignition OFF.

Nov 12, 2009 | 2001 Buick Regal

1 Answer

Honda '08 - how to reset computer after an oil

you see the reset button on you gauge cluster cycle through until you find oil life percentage hold that down(key on or engine on doesnt matter) keep holding until it flashes. then twist the button until oil life flashes. push and let go. only oil life will show now again hold the button down untill it reads 100%. this info may be in your owners manual also.

Oct 22, 2009 | 2007 Honda CR-V

1 Answer

Does the computer in an audi a4 record oil temps and rpm exceedances?

I believe so yes you need a power stat, Or Daz Bueguen OBD reader to check or a dealer ship. it may only hold 14 hours of info though...

May 18, 2009 | 2007 Audi A4 Convertible

1 Answer

08 Chevy Cobalt - Change Odometer from KM back to MI

Put key in on position with engine off.
Hold Info & Back button together for a few seconds on steering wheel.
Scroll thorugh with info button Till you see it say Kilometers.
Hold Back Button.
Should Change

Jan 22, 2009 | 2008 Chevrolet Cobalt

Not finding what you are looking for?
2006 Dodge Magnum Logo

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides