Question about Mitsubishi Galant

Open Question

V6 engine 6a11

Where do camshaft timing marks lineup with

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1071 Answers

SOURCE: timing marks for KIA camshaft sprokets

they point to 12 oclock

Posted on Aug 19, 2009

Ad
nohaironheed
  • 2 Answers

SOURCE: car repair manual for a 1997 suzuki vitara v6 2ltr petrol 24v

Haynes don't cover that engine. I've found a copy of the H25 engine manual which is similar to the H20 engine we have. If you search for SQ416 in google you'll find a copy you can buy or if you're lucky you'll find a free download somewhere like I did!! :-) It has helped me loads.

Posted on Dec 03, 2009

c17hydro
  • 2984 Answers

SOURCE: where are timing chain marks on the engine of

Please don't forget to rate:

39900a5.gif

Crankshaft and camshaft alignment marks—2.4L (VIN X) Engine

9f5c6e9.gif
Camshaft and crankshaft alignment marks—Chrysler 2.5L (VIN N) engine

acb6bd1.gif
Timing belt engine sprocket timing—2.5L (VIN H) engine

Posted on Jan 04, 2010

  • 1757 Answers

SOURCE: isuzu trooper 2002 RLV engine. camshaft timing

Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams and Photos with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams, instructions and photo's for use.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2002/make/isuzu/model/trooper/2002_isuzu_trooper_timing_belt_diagram_marks.htm

Posted on Mar 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you adjust valves on a 2006 3.5L V6 Toyota Avalon?


There is a Toyota Technical Service Bulletin issued for this:-
T-SB-0291-08 September 11, 2008 2GR-FE Valve Timing

Procedure Service Category Engine/Hybrid System Section Engine Mechanical Market USA Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION 2005 - 2009 Avalon 2007 - 2009 Camry VDS(s): BK46K 2008 - 2009 Highlander 2006 - 2009 RAV4 Engine(s): 2GR VDS(s): BK31V, BK32V, BK33V, BK34V, ZK31V, ZK32V, ZK33V, ZK34V, ZK35V 2007 - 2009 Sienna Introduction This service bulletin provides information regarding valve timing inspection and service guidelines for vehicles equipped with 2GR-FE engines. © 2008 Toyota Motor Sales, USA Page 1 of 5 T-SB-0291-08 September 11, 2008 Page 2 of 5 2GR-FE Valve Timing Procedure Introduction (Continued) Figure 1. 3 2 1 5 9 8 7 6 4 1 RH Bank Intake Camshaft Timing Gear 2 RH Bank Exhaust Camshaft Timing Gear 3 RH Bank No. 2 Timing Chain 4 Crankshaft 5 Idler Gear 6 Timing Chain 7 LH Bank No. 2 Timing Chain 8 LH Bank Exhaust Camshaft Timing Gear 9 LH Bank Intake Camshaft Timing Gear Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty © 2008 Toyota Motor Sales, USA T-SB-0291-08 September 11, 2008 Page 3 of 5 2GR-FE Valve Timing Procedure Inspection 1. Set the No. 1 cylinder to TDC/compression. A. Set the timing mark to 0 on the timing chain cover by rotating the crankshaft clockwise. B. Verify the timing marks on the camshaft timing gears are in general alignment with the timing marks of the camshaft bearing cap: TIMING MARK IDENTIFICATION CYLINDER BANK INTAKE GEAR MARK EXHAUST GEAR MARK RH Bank (Bank 1) Small Mark Single Line LH Bank (Bank 2) Large Mark Double Line HINT When the engine is correctly timed, the timing marks will NOT perfectly align. Figure 2. Figure 3. RH Bank Exhaust Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark Figure 4. RH Bank Intake Camshaft Timing Gear 2 1 1 Bearing Cap Timing Mark 2 Gear Timing Mark © 2008 Toyota Motor Sales, USA T-SB-0291-08 September 11, 2008 Page 4 of 5 2GR-FE Valve Timing Procedure Inspection (Continued) Figure 5. LH Bank Intake Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark Figure 6. LH Bank Exhaust Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark HINT If the timing marks appear vastly out of alignment, turn the crankshaft one revolution (360 ) clockwise and note the position of the timing marks. Component Removal Guidelines 1. If engine disassembly is required that involves removing the camshafts or timing gears, set the #1 cylinder to TDC compression, wipe away any oil, and mark the following items in relation to each other prior to disassembly: • Timing gears • Timing chain • Timing chain No. 2 NOTE This relationship MUST be maintained. The intake gear is timed in relation to the crankshaft via the timing chain; the exhaust gear is timed in relation to the intake gear via the No. 2 timing chain. © 2008 Toyota Motor Sales, USA T-SB-0291-08 September 11, 2008 Page 5 of 5 2GR-FE Valve Timing Procedure Component Removal Guidelines (Continued) 2. If NEW camshaft timing gears or the No. 2 timing chain are being installed, the two yellow links on the No. 2 timing chain can be used to ensure correct relationship between the intake timing gear and the exhaust timing gear. Figure 7. 1 1 Yellow Link A. Align the paint mark on the timing chain with the intake gear timing mark (to ensure the intake gear is correctly timed to the crankshaft). Figure 8. RH Bank and LH Bank 3 3 4 3 3 4 5 4 5 4 1 2 1 RH Bank 2 LH Bank 3 Yellow Link 4 Gear Timing Mark 5 Timing Chain Paint Mark B. Align the two yellow links on the No. 2 timing chain to the timing marks on

May 04, 2015 | 2006 Toyota Avalon XLS

1 Answer

Wht are the toyota timing marks


ON THE CAMSHAFT GEAR ARE UNE HOLE NEED TO MATCH THE HOLE WHIT THE MARK A THE CYLINDER HEAD AND ON THE CRANCSHAFT GEAR ARE UNE DOT ALING WHIT THE MARK A THE ENGINE OIL PUMP COVER

Sep 01, 2014 | 1992 Toyota Camry V6

1 Answer

How to tell my camshaft pulley on a 2001 Chrysler 300 is set correctly 3.5 engine


on a V6 3.5l 300 engine the timing marks on the pulleys will be exactly vertical at the top between 2 marks in the head or at 1 mark in the head

Jun 28, 2014 | Cars & Trucks

1 Answer

Diagram_hyundai trajet V6 2.7Ltr engine ( 2000 Model )


  • You want to align the Crank and Cam gears timing mark with the corresponding mark on the engine itself.

  • Camshaft Mark ---


11_3_2011_7_37_49_am.jpg
  • Crankshaft Marks.

11_3_2011_7_40_20_am.jpg
  • Here is your firing order


11_3_2011_7_44_35_am.jpg

  • Hope this helps.

Nov 03, 2011 | Cars & Trucks

1 Answer

How do you loosen the timing belt? V6 engine.


There should be a belt tensioner on that vehicle, i belive its the Hydralic Belt Tensioner, you will have to 1st loosen a 14mm nut on the belt tensioner pulley then rotate it i belive counter-clock wise to slacken the belt, then tighten that 14 mm nut to hold the tensioner back away from the belt , once you remove the belt you will have to remove the hydralic tensioner also to reset it before the new timing belt can be installed. MAKE SURE you are able to HOLD both camshafts the inner cam sprocket it spring loaded and can jump out of timing if you are not careful.
make sure when u do install the belt to rotate the engine over 2 or 3 times to make sure you have correct lineup of all the timing marks. this will insure you do not bend any valves.

Aug 25, 2010 | 2003 Toyota Camry

1 Answer

I NEED TO KNOW THE LINEUP FOR CAMSHAFT TIMING MARKS


This is for the 3.0 liter camshaft timing marks:

f9af7cc.jpg

May 18, 2010 | 1998 Toyota Camry

2 Answers

2000 dodge caravan V6 3.0L interference or not??


Timing chain is only available in the 3.3L and 3.8L engines.

Yours has a belt. (if you're SURE its a 3.0L)

Here is the info on changing it...

3.0L Engine
The timing belt can be inspected by removing the upper front outer timing belt cover.
Working on any engine (especially overhead camshaft engines) requires much care be given to valve timing. It is good practice to set the engine up at TDC No. 1 cylinder firing position before beginning work. Verify that all timing marks on the crankshaft and camshaft sprockets are properly aligned before removing the timing belt and starting camshaft service. This serves as a point of reference for all work that follows. Valve timing is very important and engine damage will result if the work is incorrect.
  1. Disconnect the negative battery cable.
  2. Remove the accessory drive belts. Remove the engine mount insulator from the engine support bracket.
  3. Remove the engine support bracket. Remove the crankshaft pulleys and torsional damper. Remove the timing belt covers.
  4. Rotate the crankshaft until the sprocket timing marks are aligned. The crankshaft sprocket timing mark should align with the oil pump timing mark. The rear camshaft sprocket timing mark should align with the generator bracket timing mark and the front camshaft sprocket timing mark should align with the inner timing belt cover timing mark.
  5. If the belt is to be reused, mark the direction of rotation on the belt for installation reference.
  6. Loosen the timing belt tensioner bolt and remove the timing belt.
  7. If necessary, remove the timing belt tensioner.
  8. Remove the crankshaft sprocket flange shield and crankshaft sprocket.
  9. Hold the camshaft sprocket using spanner tool MB990775, or equivalent, and remove the camshaft sprocket bolt and washer. Remove the camshaft sprocket.
  10. To install:
  11. Install the camshaft sprocket on the camshaft with the retaining bolt and washer. Hold the camshaft sprocket using spanner tool MB990775, or equivalent, and tighten the bolt to 70 ft. lbs. (95 Nm).
  12. Install the crankshaft sprocket.
  13. If removed, install the timing belt tensioner and tensioner spring. Hook the spring upper end to the water pump pin and the lower end to the tensioner bracket with the hook out.
  14. Turn the timing belt tensioner counterclockwise full travel in the adjustment slot and tighten the bolt to temporarily hold it in this position.
  15. Rotate the crankshaft sprocket until its timing mark is aligned with the oil pump timing mark.
  16. Rotate the rear camshaft sprocket until its timing mark is aligned with the timing mark on the generator bracket.
  17. Rotate the front (radiator side) camshaft sprocket until its mark is aligned with the timing mark on the inner timing belt cover.
  18. Install the timing belt on the crankshaft sprocket while keeping the belt tight on the tension side.
  19. Position the timing belt over the front camshaft sprocket (radiator side). Next, position the belt under the water pump pulley, then over the rear camshaft sprocket and finally over the tensioner.
  20. Apply rotating force in the opposite direction to the front camshaft sprocket (radiator side) to create tension on the timing belt tension side. Check that all timing marks are aligned.
  21. Install the crankshaft sprocket flange.
  22. Loosen the tensioner bolt and allow the tensioner spring to tension the belt.
  23. Rotate the crankshaft 2 full turns in a clockwise direction. Turn the crankshaft smoothly and in a clockwise direction only.
  24. Align the timing marks. If all marks are aligned, tighten the tensioner bolt to 250 inch lbs. (28 Nm). Otherwise repeat the installation procedure.
  25. Install the timing belt covers. Install the engine support bracket. Tighten the support bracket mounting bolts to 35 ft. lbs. (47 Nm).
  26. Install the engine mount insulator, torsional damper and crankshaft pulleys. Tighten the crankshaft pulley bolt to 112 ft. lbs. (151 Nm).
  27. Install the accessory drive belts and adjust them to the proper tension.
  28. Reconnect the negative battery cable.
  29. Run the engine and check for proper operation. Road test the vehicle.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Feb 18, 2010 | 2000 Dodge Caravan

1 Answer

Where are timing chain marks on the engine of


Please don't forget to rate:

39900a5.gif

Crankshaft and camshaft alignment marks—2.4L (VIN X) Engine

9f5c6e9.gif
Camshaft and crankshaft alignment marks—Chrysler 2.5L (VIN N) engine

acb6bd1.gif
Timing belt engine sprocket timing—2.5L (VIN H) engine

Jan 04, 2010 | 2001 Chrysler Sebring

1 Answer

Help


I will assume you are referring to the timing procedure for a replacement timing belt (4 cyl) or timing chain (V6) With the V6 timing chain you simply line up the timing marks on the two sprockets so that they are pointing directly toward each other, crankshaft sprocket with the mark pointing straight up, camshaft mark straight down. With the 2.3 L 4 cylinder engine, you must first position the crankshaft at TDC, and then position the oil pump and camshaft sprockets with their timing marks to line up with their respective marks on the inner cover. Install the belt and release the spring tensioner to let it adjust itself, tighten the tensioner bolt, and turn the engine over for 2 rotations (always clockwise as viewed from the front, never backwards). Make sure the marks still line up, loosen the tensioner, allow it to retension itself, and tighten the tensioner bolt. If the oil pump sprocket is not timed correctly, the camshaft position sensor signal will be incorrectly timed.

Aug 01, 2008 | 1997 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...