Question about Cars & Trucks

Open Question

Location of saturn astra camshaft position sensor

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 28 Answers

SOURCE: 97 Saturn Camshaft Positioning Sensor Error Code

try saturnfans.com

Posted on Mar 29, 2009

emissionwiz
  • 75797 Answers

SOURCE: camshaft position sensor location

At the right rear of the engine under the intake manifold and to the left of the oil filter. You will probably need to go under the car to spot it, it's the sensor with a three-wire connector arranged vertically. But you can take it out from above. It's held in with a single bolt with an eight MM head located just above the sensor. Un-clip and remove the electrical connector. Unscrew the bolt with a socket wrench & extension bar. Wiggle and pull the sensor out.
here is a picture.
255f615.jpg

Posted on Apr 10, 2009

  • 218 Answers

SOURCE: Camshaft Position Sensor Location

IF U GO TO THE RIGHT SIDE OF THE ENGINE AND LOOK 4 INCHES BEHIND THE BELT IT WILL BE ON TOP OF THE TIMING COVER.THE WIRES WILL BE RED/WHITE,BLACK,BROWN/WHITE

Posted on May 05, 2009

  • 144 Answers

SOURCE: Where is the camshaft position sensor located in a 2001 VW Passat

when you are looking at the engine pull off the plastic cover on top then the front cover that covers you timing belt there is a wire harness tha goes right to it in the left upper coner two ten mil bolts and it comes off careful not to drop bolts down in belt that could be bad. it is that easy

Posted on Sep 01, 2009

  • 14036 Answers

SOURCE: 98 silverado 5.7L camshaft position sensor

ITS ABOVE CRANKSHAFT PULLEY.IT CONNECTS WITH CRANKSHAFT POSITION SENSOR.

Posted on Oct 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is cam shaft sensor located on a 08 saturn aura


Which engine ? This vehicle had option of six different engines , 2.4 , 3.5 , 2.8 , 3.0 , 3.2 , 3.6 And are you picking on the right part ? What code > DTC P0010: Intake Camshaft Position (CMP) Actuator Solenoid Control Circuit

DTC P0013: Exhaust Camshaft Position (CMP) Actuator Solenoid Control Circuit
It may not even be a cam sensor problem !
DTC P0340: Intake CMP Sensor Circuit

DTC P0365: Exhaust Camshaft Position (CMP) Sensor Circuit
DTC P0341: Intake Camshaft Position (CMP) Sensor Performance

DTC P0366: Exhaust Camshaft Position (CMP) Sensor Performance
Camshaft Position (CMP) Actuator System
The camshaft position (CMP) actuator system is an electro-hydraulic operated device used for a variety of engine performance and operational enhancements. These enhancements include lower emission output through exhaust gas dilution of the intake charge in the combustion chamber, a broader engine torque range, and improved fuel economy. The CMP actuator system accomplishes this by changing the angle or timing of the camshaft relative to the crankshaft position. The CMP actuator simply allows earlier or later intake and exhaust valve opening during the four stroke engine cycle. The CMP actuator cannot vary the duration of valve opening, or the valve lift.
During engine OFF, engine idling conditions, and engine shutdown, the camshaft actuator is held in the Park position. Internal to the CMP actuator assembly is a return spring and a locking pin. During non-phasing modes of the camshaft, the return spring rotates the camshaft back to the Park position, and the locking pin retains the CMP actuator sprocket to the camshaft


It may

Jul 06, 2016 | 2008 Saturn Aura

1 Answer

How to replace a camshaft sensor


2006 Saturn Ion Camshaft position sensor location:
The camshaft position sensor is located in the top left side of the valve cover.

Feb 10, 2015 | 2006 Saturn ION

1 Answer

Where on engine can a crank shaft position sensor be located on a 2002 Saturn sl


I think this saturn is the same as the opel astra /zafiro if so then its front bottom right on the engine block in line with the crankshaft ,But no doubt iam wrong as never seen this saturn car here in spain

Dec 09, 2014 | 2002 Saturn Sl

1 Answer

Where is the cam sensor on a 1999 saturn sc1 3 door located.


. This vehicle doesnt have a camshaft position sensor, it uses the crankshaft position

Oct 12, 2014 | Saturn SC1 Cars & Trucks

1 Answer

Location of camshaft position sensor on 2009 saturn aura


2.4L cmp sensor exhaust located upper rear of the engine near camshaft cover. 2.4L cmp sensor intake located upper front of the engine near the camshaft cover. the 3.5L cmp sensor located right side of engine compartment above the timing chain cover.below power steering pump.3.6L cmp sensor located right side of the engine near the front and rear.

Sep 26, 2013 | Cars & Trucks

1 Answer

Where is camshaft position sensor on 2001 Saturn


Hi there:
This vehicle doesnt have a camshaft position sensor, it uses the crankshaft position sensor .. image link HERE.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 24, 2012 | 2001 Saturn SL

1 Answer

My saturn is idoling high the machine says its cam sensor, im hearing theres not one what could it be if not cam sen


Camshaft Position Sensor

This vehicle does not have a Camshaft Position Sensor. The manufacture does make references to "CAM" in some of the trouble code descriptions but this is NOT a reference to a Camshaft Position Sensor.

Notes On System Inputs

The EI module does not receive a signal from the crankshaft position sensor. Instead the CPK sensor signal is being received and processed by the PCM. The El module does, however, contain circuitry to determine camshaft position without using a camshaft sensor, by use of compression sense ignition (CSI).

Apr 04, 2011 | 1997 Saturn SL

2 Answers

2002 saturn sl1 camshaft position sensor


I hate to tell you this, but there is not Camshaft Position Sensor on any 1.9L Single or Dual OHC. I assume you had someone read a Diagnostic Trouble Code from your PCM. They probably told you that you needed a Camshaft Position Sensor, and then offered to sell you one. I would recommend changing your spark plugs and your plug cables with FACTORY REPLACEMENTS. This will usually make the DTC go away. Aftermarket plugs and wires rarely work well for this engine. If you are looking for a CRANKSHAFT position sensor, look between the engine and transmission on the back side of the transmission. It is also known as the "transmission input speed sensor". More often than not though, your engine will not fire up if the Crank position sensor is not working. Hope this helps.

Aug 24, 2008 | 2002 Saturn Sl

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...